Elega Light Arc Wall Lamp

Product Overview

This document provides instructions for the installation of the Elega Light Arc Wall Lamp.

For more information, visit www.elegalight.com.

Mounting Instructions

The lamp is mounted to a wall using a mounting plate. The plate is secured to the wall with two screws, as depicted in the diagram.

Diagram Description: A wall mounting plate is shown being attached to a vertical surface using two screws. The plate has pre-drilled holes for wiring.

Wiring Connections

Proper electrical connections are essential for safe operation. The following wire designations are used:

• Live/Phase: Labeled in English as "Live", in French as "Phase", and in Spanish as "Con corriente".
• Neutral: Labeled in English as "Neutral", in French as "Neutral", and in Spanish as "Neutro".
• Earth/Ground: Labeled in English as "Earth/Ground", in French as "Terre", and in Spanish as "Tierra".

The diagram illustrates connecting these wires to the corresponding terminals (L, N, and Earth) within the fixture. A wire connector block is used for securing the connections.

Diagram Description: A detailed view shows electrical wires (Live, Neutral, Earth) being connected to terminals marked L and N, and an implied Earth terminal. A wire connector block is shown, where wires are inserted and secured.

Final Assembly

Attach the main lamp body to the mounting plate. Ensure all screws are securely tightened, as indicated by the "2x" marking in the diagram, suggesting screws should be tightened firmly.

Diagram Description: The lamp arm and head assembly is shown being connected to the wall-mounted plate. A close-up detail indicates that screws are used for securing and should be tightened.