Main Control Card Installation
This guide outlines the steps for installing the main control card into the fan frame.
Installation Steps
- Insert the main control card into the yellow M-shaped position on the right side of the fan frame.
- You can use a helper to insert the main control card at the end of the fan frame.
- Finally, tighten the captive screws on both sides.
Diagram Description
The diagram illustrates a rack-mountable electronic device. The front panel of the device is partially removed to show internal components. A main control card is depicted being inserted into a slot on the right side of the fan frame. The process is broken down into three steps, indicated by numbered callouts with accompanying text. The first callout points to the insertion of the card into an M-shaped slot. The second callout suggests using assistance for insertion at the end of the fan frame. The third callout indicates tightening captive screws on both sides to secure the card.