Tork Xpress® Adapter for Tork Singlefold Hand Towel Dispenser

Product Overview

This document provides instructions for installing the Tork Xpress Adapter, designed for use with the Tork Singlefold Hand Towel Dispenser. The adapter is identified by the code H3.

The adapter consists of two main parts: two vertical guide pieces (x2) and a base piece (x1).

Assembly Instructions

Step 1: Attaching the Guide Pieces

Take the two vertical guide pieces and align them with the slots on the base piece. Push down firmly until they click into place. You should hear a distinct 'click' sound for each piece, indicating secure attachment.

Step 2: Inserting the Adapter into the Dispenser

Open the Tork Singlefold Hand Towel Dispenser. The dispenser has a locking mechanism. To unlock, turn the key in the lock symbol ?. To open, use the key to turn the lock and then pull the dispenser door open. Insert the assembled adapter into the dispenser. The adapter base should fit into the bottom of the dispenser. Push the adapter down until it clicks into place, ensuring it is securely seated.

Step 3: Loading Hand Towels

With the adapter in place, load the Tork Singlefold Hand Towels into the dispenser. Place the stack of towels onto the adapter. The dispenser is identified by the code H2.

Step 4: Closing the Dispenser

Close the dispenser door. Ensure it latches securely.

Step 5: Final Check

The adapter is now installed. The dispenser is ready for use.

Cleaning Instructions

• Use mild cleaners.
• Wipe with a cloth using soap and water.
• Do not use abrasives.

Manufacturer Information

Manufactured by Essity Hygiene and Health AB.

Address: SE-40503 Göteborg, Sweden

Visiting address: Mölndals Bro 2, Mölndal

Website: www.essity.com, www.torkglobal.com

Made in Hungary.

For patents and information, visit: www.essity.com/patents

Essity UK Limited

Address: Southfields Road, Dunstable, Bedfordshire, LU6 3EJ, UK