Inventor Air Conditioning Systems - WiFi Function
User Manual of App
This document provides instructions for the setup and use of the WiFi function for Inventor Air Conditioning Systems.
1. Precautions
- Applicable Platforms: iOS, Android.
- This APP has been updated and supports the latest versions of Android & iOS operating systems.
- Wireless Safety: The unit supports WPA-PSK/WPA2-PSK encryption and no encryption. WPA-PSK/WPA2-PSK is recommended. Please check the Service Website for detailed information.
- The smartphone's camera should be at least 5MP for proper QR code scanning.
- Due to network connectivity traffic and interference, connection requests may time out. In such cases, re-run network configuration.
- Due to dynamic network connectivity, the process may time out. The Smart App and product may display conflicting settings. Reconnect to Sync.
- Note: Inventor is not responsible for any issues caused by Internet, Wireless Router, or other smart devices. Please contact the provider for assistance.
2. Download and Install APP
- Android Users: Scan QR Code A or go to Google Play, search for "Invmate II" app and download.
- iPhone Users: Scan QR Code B or go to App Store, search for "Invmate II" app and download.
3. User Registration
Caution: Ensure your mobile device is connected to a wireless router with internet access before proceeding with user registration and network configuration.
4. How to Configure Networks
Caution: Ignore all other network connections and connect only to the desired wireless network. Ensure the device's Wireless setting is enabled and automatically connects to its original network.
- Connecting with an Android device:
- Connect your mobile device to the desired wireless network. Ignore other networks.
- Press the Power button to turn on the unit, then press and hold the Filter button to activate App mode.
- Press "+ Add Device".
- Scan the QR Code attached with the unit.
- Return to the APP and click "Next".
- Select your Wireless network (e.g., My Home), enter your Wireless router password, and click OK.
- Upon correct configuration, the device will appear on the list. If not, check the user manual for details.
- Connecting with an iOS device:
- Ensure your mobile device is connected to the desired wireless network. Ignore other networks.
- Press the Power button to turn on the unit, then press and hold the Filter button to activate App mode.
- Press "+ Add Device".
- Scan the QR Code attached with the unit.
- Read the instructions and press the "Home" button to return to the phone desktop.
- Click Settings, select WLAN.
- Choose the network (e.g., net_a1_XXXX) and enter the default password (12345678), then click "Join".
- Return to the APP and click "Next".
- Select your Wireless network (e.g., My Home), enter your Wireless router password, and click OK.
- Upon correct configuration, the device will appear on the list. If not, check the user manual for details.
Note: If "please connect to xxx" appears, manually connect to your wireless network and click OK.
5. How to use APP
Both the mobile device and the dehumidifier must be connected to the Internet before using the APP. To control the dehumidifier via the Internet, follow these steps:
- Type your account information and password, then click "Sign In".
- Select your device to control the dehumidifier via the internet.
6. Function Introduction
From left to right, the buttons are: Power, Auto Dehumidification, Continuous, and Turbo.
- 1. Power: Press to turn the humidifier on/off.
- 2. Auto Dehumidification Mode: Press the icon to activate/deactivate.
- 3. Continuous Mode: Press the icon to activate/deactivate.
- 4. Turbo Mode: Press the icon to activate high fan speed. Press again to return to normal speed.
- 5. Humidity Control: The humidity range is 35%RH-85%RH. Adjust the white pointer clockwise to add humidity and counter-clockwise to reduce it. The yellow pointer indicates the current indoor humidity.