User Manual for Kinetic Wall Switches
Model Numbers: CUL 40031, CUL 40032, CUL 40033, CUL 40034, CUL 40035, CUL 40036
Version: v3
A. What is in the box?
1 Gang:
- 1 x Kinetic Wall Switch
- 2 x Screws
- 2 x Wall Anchors
- 1 x Mounting Plate
2 Gang:
- 1 x Kinetic Wall Switch
- 2 x Screws
- 2 x Wall Anchors
- 1 x Mounting Plate
3 Gang:
- 1 x Kinetic Wall Switch
- 2 x Screws
- 2 x Wall Anchors
- 1 x Mounting Plate
B. Specifications
Dimensions:
All models share a base size of 86mm width and 86mm height. Depth varies: standard models are 15mm deep, while other variants are 42.5mm or 28.2mm deep.
Power Source: Self Powered (Kinetic)
Radio Frequency: 433 MHz
Switching Type: Push Switch
Dimming Type: Push Selected (Only available on 2 Gang Switch)
IP Rating: IP42
Body Material: Polycarbonate
Transmission Range:
- Outdoor: 150m (no barrier)
- Indoor: 25m (plaster board, drywall)
- Indoor: 12m (concrete, glass walls)
(Range may vary depending on surrounding situation)
Certifications: CE ROHS
C. Installations
1. Screw Installation
- Remove front cover: Carefully pry open the front cover. Inserting a coin into the switch gap and twisting can assist in opening the cover.
- Fix to back box: Secure the switch mechanism to a standard electrical back box.
- Reinstall front cover: Snap the front cover back into place.
- Installation Completed: The switch is now installed.
2. Surface Installation
- Remove sticker cover: Peel off the adhesive backing from the switch.
- Clean the surface: Ensure the mounting surface is clean and dry.
- Apply to the switch: Align the switch with the desired mounting location.
- Attach the switch to surface: Press the switch firmly onto the prepared surface to secure it.
D. Operation
Gang Types:
The switches are available in 1 Gang, 2 Gang, and 3 Gang configurations, indicating the number of independent controls per unit.
Switch Types:
- ON/OFF Switch: Available in 1 Zone, 2 Zone, and 3 Zone variants for controlling one, two, or three separate loads.
- Dimmer Switch: A 1 Zone switch designed for dimming lights.
- CCT Switch: A 1 Zone switch for adjusting the Color Correlated Temperature of lighting.
- RGB Switch: A 1 Zone switch for controlling RGB color lighting.
E. Compatible controllers (Order separately.)
- ON/OFF Receiver: A receiver unit for basic ON/OFF control.
- ON/OFF Receiver Tuya Wifi (2.4G): A receiver unit with Tuya Wifi (2.4GHz) connectivity for smart home integration.
- Dimmer Receiver Tuya Wifi (2.4G): A receiver unit for dimming control, featuring Tuya Wifi (2.4GHz) connectivity.
