Kinetic Wireless Doorbell S 7070/BF-707D

Features

• Material: ABS
• Receiver Voltage: 110-220V - 433.92 MHz
• Volume: Max 90 Db at 1 meter
• Range: 100 meters without obstacles
• Supplied with wall mounting hardware

How to Use

Installation

To ensure optimal performance, avoid placing the transmitter or receiver too close to metallic surfaces or metal/UPVC door frames, as this can reduce the operating range. Always test the functionality before final installation.

Receiver Installation

Plug the receiver into a power outlet, positioning it away from other electrical devices that might interfere with signal reception.

Positioning Guide: The diagram illustrates ideal placement for good signal reception versus poor reception. Factors like distance and metallic objects affect signal strength. The receiver includes a "Range Guide" indicating signal levels from High to Low.

Transmitter Installation

Clean the surface where the transmitter will be mounted.

Before permanent installation, test the placement of both the transmitter and receiver. Close all doors during the test. If the receiver does not sound, consult the troubleshooting section.

Use the provided double-sided adhesive pad to attach the transmitter to the wall.

Operation

Sound Adjustment

Use the volume control knob (labeled 5) to set the desired volume level (e.g., 100%, 75%, 50%, 25%).

Melody Selection

Press the ring tone button (labeled 6) to choose from 36 available melodies. The default "ding-dong ding-dong" melody will reset automatically if the receiver is unplugged and plugged back in.

Transmitter/Receiver Synchronization

To pair the transmitter and receiver:

1. Press and hold the volume button (labeled 5) for 5 seconds until the indicator light flashes.
2. Release button 5, then press the transmitter (labeled 1).
3. The receiver will beep once and flash to confirm successful pairing.

The system automatically returns to normal mode after a few seconds. To pair multiple transmitters, repeat this process for each one. The chime has internal memory, so re-pairing after a power failure is not required.

Care and Maintenance

Receiver Precautions

• Before connecting, verify that your home's electrical voltage matches the voltage indicated on the device's rating label.
• To prevent electric shock, do not immerse the power cord, plug, or any part of the device in water or other liquids.
• Avoid handling the device or plug with wet hands.
• Do not use the device if the plug or power cord is damaged, if it malfunctions, or if it has been dropped in water or fallen.
• Never attempt to repair the device yourself. It must be serviced by a qualified service center or repair technician.
• Do not use the device outdoors.

Troubleshooting

Disposal

In accordance with the European directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE), used household appliances should not be disposed of with normal municipal waste. Used devices must be collected separately for optimal recovery and recycling of materials to reduce impact on human health and the environment.

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capacities, or persons lacking experience or knowledge, unless they are supervised or have received instructions regarding its use from a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.