Manuals+

Briggs & Stratton Pressure Washer Parts Manual

Manufacturer Number: 020545-02

Model: 2,200 PSI Briggs & Stratton

Table Of Contents

Model Components

Main Unit (80005814)

Note: Unless noted otherwise, use the standard torque specifications.

Main Unit Components Diagram

Item 1: BASE

Item 2: HANDLE

Item 3: BILLBOARD

Item 4: CLIP

Item 5: PUMP

Item 6: FILTER

Item 7: VALVE-THERMAL RELIEF

Item 8: ADAPTER-GARDEN HOSE

Item 9: AXLE

Item 10: NUT, 3/8-16

Item 11: WAND-QC

Item 12: GUN

Item 13: HOSE

Item 14: KIT-QC NOZZLES (Includes GREEN, RED, BLACK nozzles)

Item 15: KIT-WHEEL

Item 16: KIT-HARDWARE PUMP MOUNTING

Item 17: KIT-HARDWARE, HANDLE

Item 18: KIT-O-RING

Item 900: MOUNT-VIBRATION

Engine: ** ENGINE (Contact Engine Manufacturer for parts and service.)

Additional Parts:

  • HOSE-CHEMICAL (Not Illustrated)
  • OIL (Not Illustrated)
  • LABEL-Warning (Not Illustrated)
  • DECAL-Spark (Not Illustrated)
  • KEY (Not Illustrated)
  • TAG-WARNING (Not Illustrated)
  • PUMP SAVER (Optional Accessory - Not Included)

Torque Specification Chart

The following charts provide torque specifications for standard metric and machine hardware. Use these guides to select the appropriate hardware.

Torque Specification Chart for Standard Metric Machine Hardware (Tolerance ± 20%)

Property Class Class 5.6 Class 8.8 Class 10.9 Class 12.9
Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
M3 5.88 0.56 13.44 1.28 19.2 1.80 22.92 2.15
M4 13.44 1.28 30.72 2.90 43.44 4.10 52.56 4.95
M5 26.4 2.50 60.96 5.75 5.97 8.10 7.15 9.7
M6 44.64 4.3 7.3 9.9 10.3 14 12.1 16.5
M7 - 5.2 - 7.1 12.1 16.5 16.9 23
M8 - 7.7 10.5 17.7 24 25 34 29 40
M10 15 21 35 48 50 67 59 81
M12 26 36 61 83 86.2 117 103 140
M14 42 58 101 132 136 185 162 220
M16 64 88 147 200 210 285 250 340
M18 89 121 202 275 287 390 346 470
M20 126 171 290 390 405 550 486 660
M22 169 230 390 530 559 745 656 890
M24 217 295 497 675 708 960 840 1140
M27 320 435 733 995 1032 1400 1239 1680
M30 435 590 995 1350 1401 1900 1681 2280
M33 590 800 1349 1830 1902 2580 2278 3090
M36 759 1030 1740 2360 2441 3310 2935 3980
M39 988 1340 2249 3050 3163 4290 3798 5150

Torque Specification Chart for Standard Machine Hardware (Tolerance ± 20%)

Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32 19 2.1 30 3.4 41 4.6
8-36 20 2.3 31 3.5 43 4.9
10-24 27 3.1 43 4.9 60 6.8
10-32 31 3.5 49 5.5 68 7.7
1/4-20 66 7.6 8 10.9 12 16.3
1/4-28 76 8.6 10 13.6 14 19.0
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 29 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0

Hardware Identification and Measurement Guide

Nut, M8

  • Thread Diameter (mm): [measurement symbol]
  • Body Diameter (mm): [measurement symbol]
  • Distance between threads (mm): [measurement symbol]
  • Body Length (mm): [measurement symbol]

Screw, M8-1.25 x 25

  • Thread Diameter (mm): [measurement symbol]
  • Body Diameter (mm): [measurement symbol]
  • Distance between threads (mm): [measurement symbol]
  • Body Length (mm): [measurement symbol]

Nut, 1/2-16

  • Thread Diameter (in): [measurement symbol]
  • Body Diameter (in): [measurement symbol]
  • Threads per inch: [measurement symbol]
  • Body Length (in): [measurement symbol]

Screw, 1/2-16 x 2

  • Thread Diameter (in): [measurement symbol]
  • Body Diameter (in): [measurement symbol]
  • Threads per inch: [measurement symbol]
  • Body Length (in): [measurement symbol]

Standard Hardware Sizing

When a washer or nut is identified as 1/2" (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads).

When bolt or capscrew is identified as 1/2 - 16 x 2" (M8 - 1.25 x 50), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number, 16, represents the threads per inch, (distance between threads). The final number is the body length of the bolt or screw, 2 inches (50mm).

Common Hardware Types

  • Hex Head Capscrew
  • Washer
  • Carriage Bolt
  • Hex Nut
  • Lockwasher

Wrench & Fastener Size Guide

  • 1/4" Bolt or Nut: Wrench-7/16"
  • M6 Bolt or Nut: Wrench-10mm
  • 5/16" Bolt or Nut: Wrench-1/2"
  • M8 Bolt or Nut: Wrench-13mm
  • 3/8" Bolt or Nut: Wrench-9/16"
  • M10 Bolt or Nut: Wrench-17mm
  • 7/16" Bolt or Nut: Wrench (Bolt)-5/8", Wrench (Nut)-11/16"
  • M12 Bolt or Nut: Wrench-19mm
  • 1/2" Bolt or Nut: Wrench-3/4"
  • M14 Bolt or Nut: Wrench-22 mm

Notes:

Models: 020545-02, 020545 Troy Bilt Pressure Washer, 020545, Troy Bilt Pressure Washer, Bilt Pressure Washer, Pressure Washer, Washer

PDF preview unavailable. Download the PDF instead.

020545-02 ipl 3-Heights(TM) PDF Security Shell 4.8.25.2 (http://www -tools.com)

Related Documents

Preview Briggs & Stratton 020380 Pressure Washer Illustrated Parts List
Comprehensive illustrated parts list for the Briggs & Stratton 020380 pressure washer, detailing components, part numbers, and descriptions for maintenance and service. Includes specifications for 3200 PSI operation.
Preview Briggs & Stratton 020418-0 2700 PSI Pressure Washer Illustrated Parts List
Illustrated parts list for the Briggs & Stratton 020418-0 2700 PSI Pressure Washer, including part numbers and descriptions for all components.
Preview Briggs & Stratton Industrial/Commercial Engine Parts List: Model Series 326400-326499
Comprehensive illustrated parts list for Briggs & Stratton industrial and commercial engines, model series 326400 to 326499. Provides detailed diagrams and part number cross-references for engine components, type numbers, and service information.
Preview Briggs & Stratton 01808-1 Pressure Washer Parts Manual
Comprehensive parts breakdown and torque specifications for the Briggs & Stratton 01808-1 pressure washer, featuring a 3,400 PSI, 10 HP engine.
Preview Briggs & Stratton Illustrated Parts List - Pressure Washer
Illustrated parts list for Briggs & Stratton 2,700 PSI pressure washer (Model 020389-0), covering main unit components, pump service parts, and torque specifications. Includes support contact information.
Preview Briggs & Stratton 126M00 Model Series Illustrated Parts List
This document provides an illustrated parts list for the Briggs & Stratton 126M00 model series, detailing various components and their corresponding part numbers for assembly and maintenance.
Preview Briggs & Stratton 40T876-0011-G1 Illustrated Parts List
This document is an illustrated parts list for the Briggs & Stratton 40T876-0011-G1 engine. It provides detailed diagrams and part numbers for various engine components, including the sump group, alternator group, governor group, carburetor and fuel supply group, crankshaft group, and cylinder group.
Preview Briggs & Stratton 126T00 Illustrated Parts List
Comprehensive illustrated parts list for Briggs & Stratton Model 126T00 engines, covering type numbers 0004 through 3842. Includes detailed part numbers and descriptions for various engine components.