Briggs & Stratton Model 126T00 Illustrated Parts List
This document provides a detailed illustrated parts list for Briggs & Stratton Model 126T00 engines, covering type numbers 0004 through 3842.
Table of Contents
- Air Cleaner
- Blower Housing/Shrouds
- Camshaft
- Carburetor
- Controls
- Crankshaft
- Cylinder
- Electric Starter
- Electrical
- Engine Sump
- Exhaust System
- Flywheel
- Flywheel Brake
- Fuel Supply
- Governor Spring
- Ignition
- Kits/Gaskets
- Lubrication
- Piston Group
- Rewind Starter
- Valves
Component Diagrams and Part Numbers
The following sections detail various engine components with their corresponding part numbers. Illustrations are provided to identify each part.
Page 2: Engine Components
Illustrations show components such as the cylinder assembly, crankshaft, breather assembly, and various gaskets and screws.
Key components include:
- Cylinder Assembly (Ref. No. 1)
- Kit-Bushing/Seal (Magneto Side) (Ref. No. 2)
- Seal-Oil (Magneto Side) (Ref. No. 3)
- Sump-Engine (Ref. No. 4)
- Head-Cylinder (Ref. No. 5)
- Gasket-Cylinder Head (Ref. No. 7)
- Breather Assembly (Ref. No. 8)
- Gasket-Breather (Ref. No. 9)
- Screw (Breather Assembly) (Ref. No. 10)
- Tube-Breather (Ref. No. 11)
- Gasket-Crankcase (Ref. No. 12)
- Screw (Cylinder Head) (Ref. No. 13)
- Plug-Oil Drain (Square Socket) (Ref. No. 15)
- Crankshaft (Ref. No. 16)
Page 3: Carburetor and Choke Systems
Diagrams illustrate the Primer System, Choke System, and Autochoke System, along with associated parts like carburetors, jets, and gaskets.
Key components include:
- Primer System components (Ref. No. 118, 276, 117)
- Choke System components (Ref. No. 118A, 276, 117A)
- Autochoke System components (Ref. No. 118B, 276, 117B)
- Carburetor Overhaul Kit (Ref. No. 121)
- Carburetor Gasket Set (Ref. No. 977)
Page 4: Housing and Blower Components
Illustrations show various housing parts, blower components, and related hardware.
Key components include:
- Blower Housing (Ref. No. 300, 300A)
- Various guards and shields (e.g., Ref. No. 832, 832A, 836, 836B)
Page 5: Control and Ignition Systems
Diagrams display components related to engine controls, ignition systems, and linkages.
Key components include:
- Various Bracket-Control assemblies (Ref. No. 222, 222A, 222C, 222D, 222E)
- Link-Lockout (Ref. No. 236)
- Wire-Control (Ref. No. 269)
- Lever-Governor Control (Ref. No. 227)
Page 6: Blower Housing Variants
This page shows various configurations of blower housings and shrouds (Ref. No. 921B through 921U).
Page 7: Starter Motor and Flywheel Components
Illustrations cover starter motors, flywheel components, and related parts.
Key components include:
- Motor-Starter (Ref. No. 309, 309A)
- Flywheel (Ref. No. 363)
- Armature-Starter (Ref. No. 544)
- Rope-Starter (Ref. No. 58)
Page 8-15: Detailed Part Listings
These pages provide comprehensive tables listing part numbers, descriptions, and the specific engine type numbers they are used with. This includes a wide range of components such as:
- Cylinder Assemblies
- Crankshafts
- Seals and Gaskets
- Carburetor parts
- Flywheels
- Valves and Springs
- Control linkages
- Starter components
- Mufflers
- Various screws, nuts, and bolts
Note: Parts shown in illustrations may not be used on all specific engines. Assemblies include all parts shown in frames.
Related Documents
 |
Briggs & Stratton 09D902-2083-99 Parts Manual This document is an illustrated parts manual for the Briggs & Stratton engine with Model No. 09D902-2083-99. It provides detailed diagrams and part numbers for various engine components, including the air cleaner, controls, exhaust system, governor spring, ignition, blower housing, flywheel, rewind starter, brake, camshaft, crankcase, crankshaft, piston, rings, connecting rod, carburetor, fuel supply, cylinder, cylinder head, and gasket sets. |
 |
Briggs & Stratton 40T876-0011-G1 Illustrated Parts List This document is an illustrated parts list for the Briggs & Stratton 40T876-0011-G1 engine. It provides detailed diagrams and part numbers for various engine components, including the sump group, alternator group, governor group, carburetor and fuel supply group, crankshaft group, and cylinder group. |
 |
Briggs & Stratton Gasket Set 794307 - Parts List Comprehensive list of Briggs & Stratton engine models compatible with gasket set 794307, detailing key engine components. |
 |
Briggs & Stratton Engine Model Numbering System Explained Learn how to decipher Briggs & Stratton engine model numbers to understand key mechanical features like cubic inch displacement, crankshaft orientation, and starter type. |
 |
Briggs & Stratton Master Parts Catalog 2015-16 Comprehensive parts catalog for Briggs & Stratton engines and power products, including engine parts, retail accessories, Murray parts, and dealer merchandise. Features genuine parts for various engine series and power levels. |
 |
Briggs & Stratton 126M00 Model Series Illustrated Parts List This document provides an illustrated parts list for the Briggs & Stratton 126M00 model series, detailing various components and their corresponding part numbers for assembly and maintenance. |
 |
Briggs & Stratton Motor Parts: Cylinder, Crankcase, and Carburetor Assemblies A comprehensive list of Briggs & Stratton motor part numbers for Cylinder, Crankcase, Gear Case, and Carburetor Assemblies. Find the correct part for your engine by matching your motor number. |
 |
Briggs & Stratton Service Engine Sales Manual 135200-135299 This manual provides detailed replacement information, part cross-references, and engine specifications for Briggs & Stratton Model 135200 series service engines, facilitating proper part selection and engine service. |