M3 Pro Gimbal: User Guide and Specifications

Product List

Before use, please check the package carefully as per the product list. In case of missing items, please contact customer service or your agent.

• M3 Pro Gimbal x 1
• Bluetooth Remote Controller x 1
• Magnetic Fill Light x 1
• USB-C Cable x 1
• User Manual x 1

Product Introduction

The M3 Pro is a versatile smartphone gimbal designed for enhanced mobile photography and videography. Key components include:

• Lock button
• Magnetic Fill Light
• Built-in extension rod
• Power button/indicator light
• AI Tracking Camera
• 1/4 threaded interface
• Bluetooth Remote Controller
• USB-C charging interface
• Adjusting knob
• Tripod

Product Charging

Stabilizer Charging

Use the provided USB-C charging cable to connect a power adapter to the stabilizer's charging interface.

Indicator Light Status:

• Low battery: Red light blinking
• Charging: Red light blinking
• Fully charged: Red light solid

Fill Light Description

The phone clamp features a built-in magnetic strip for easy attachment of the fill light.

Power Button:

• Press and hold: Power on/off
• Single click: Switch colors (White, Warm White, Red, Blue, Green, Purple, Cyan)
• Double click: Activate alternate gradient mode (Red, Yellow, Green, Cyan, Blue, Purple)

Mode Button:

• Single click (in single-color mode): Adjust brightness (3 levels)
• Single click (in gradient mode): Switch gradient speed
• Double click: Activate Red/Blue slow flashing mode

Fill Light Charging Indicator:

• Charging: Red light solid
• Fully charged: Green light solid

Fill Light Product Specifications:

Operating Modes

Handheld Shooting Mode

Setup:

1. Lift the stabilizer's phone clamp arm upward and rotate the clamp assembly 180° on its pivot shaft to the front-facing position.
2. Unlock the clamp button. Position the phone centrally. The phone can be installed in horizontal or vertical orientation. Ensure the phone's camera and AI lens face the same direction.
3. Long press the power button to turn on the device.

Angle Adjustment: Hold the axis arm under the phone clip, stretch it upward to extend the built-in extension rod, and adjust the angle by moving it back and forth.

AI Tracking Mode

Setup:

1. Press the base plate to automatically deploy the tripod legs.
2. Pull up the device to extend the built-in extension rod, then place the device on a stable surface.
3. Support the phone clamp and insert your phone. Both horizontal and vertical orientations are supported.
4. Unlock the locking button, then press and hold the power button to turn on the device.

Indicator and Gesture Control

Indicator Lights

Handheld Shooting Mode:

• Blue light: Power on (default)
• White light: POV mode

AI Tracking Mode:

• Blue light: Power on (default)
• Green light solid: Locked character (gesture function on)
• Yellow light solid: Locked character (gesture function off)
• Green light/Yellow light blinking: Unlocked character

Gesture Introduction (AI Tracking Mode)

• OK gesture: Turn on tracking
• Palm gesture: Turn off tracking
• Both hands L gesture: Turn on/off gesture control

Power Button Functions

The power button offers quick operations with different functions depending on the mode.

Gimbal Power Button Operations:

Remote Controller Functions

The remote controller provides comprehensive control over the gimbal.

Shoot Button:

• Handheld dolly shot mode / AI tracking mode: Long press: Power on/off; Single click: Capture photo / Start/stop video
• AI tracking mode: Double click: Turn on/off AI tracking; Triple click: Turn on/off gesture control

Mode Button (Handheld dolly shot mode):

• Single click: Switch to horizontal/vertical orientation
• Double click: Center the phone / exit POV / exit rotation
• Triple click: POV mode

Orbit Shooting Button (Handheld dolly shot mode / AI tracking mode):

• Single click: 200° automatic rotation
• Double click: 200° forward and reverse rotation twice
• Triple click: 360° rotation
• Hold 3 seconds: 360° spin

Left Button (Handheld dolly shot mode / AI tracking mode):

• Long press: Adjust angle (turn left)

Right Button (Handheld dolly shot mode / AI tracking mode):

• Long press: Adjust angle (turn right)

Remote Controller Indicator Light Status:

• Power on (Bluetooth not connected): Blue light flashing
• Power on (Bluetooth connected): Blue light flashes once per button press to indicate command reception
• Fully charged (when powered off): Green light solid
• Charging (when powered off): Red light solid
• Low battery: Blue light flashes rapidly 3 times then turns off

Notes:

• When using the remote control's left/right buttons for device control, ensure the AI tracking function is off (power button should be blue).
• Before using other function modes, ensure POV mode is exited (power button should be blue).
• If the remote control is powered on but not connected to Bluetooth and no buttons are pressed, it will automatically shut down after 10 minutes to save power.
• If the remote control is powered on and connected to Bluetooth but no buttons are pressed, it will automatically shut down after 20 minutes to save power.

Product Parameters

Gimbal Parameters:

Remote Controller Parameters:

*Remote controller working hours are related to the frequency of use, and the data is calculated according to the use of 10 minutes a day.

*The above data are laboratory test data. Under different test conditions, the data may vary. Please refer to actual usage experience.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note on Interference:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.