M3 Pro 3-axis Gimbal

1. Preparation

For iOS devices: Search for "Gimbal Play" in the APP Store.

For Android devices: Search for "Gimbal Play" in the Google App Store.

Scan code to download "Gimbal Play" app.

Bluetooth connection:

When using the APP, the Bluetooth name "M3" will pop up in the APP. Click to confirm pairing. When using the native camera, search for the Bluetooth name "M3" in Settings-Bluetooth and click to connect and pair.

2. Recognition Stabilizer

This product is a three-axis stabilizer specially designed for mobile phones. It can assist mobile phones in shooting, effectively eliminate picture shake caused by the external environment during the shooting process, and provide stable and smooth images. The stabilizer operation is simple and clear, making it easy for the elderly and children to get started. It can meet the needs of all mobile phone photography enthusiasts. The stabilizer can support horizontal and vertical shooting of the mobile phone and can control the direction button to manually adjust the shooting angle of the mobile phone, to meet the requirements of shooting and video production.

Diagram: A line drawing of the M3 Pro 3-axis gimbal. Key components are labeled with numbers 1 through 11, corresponding to the list below.

• 1. Roll axis
• 2. Pitch axis
• 3. Zoom
• 4. Course axis
• 5. Photo
• 6. Type-C charging port
• 7. Direction
• 8. Mode
• 9. Power
• 10. Indicator light
• AF: Full follow mode
• POV: POV mode
• DM: Dream Space Mode
• Remote control indicator light
• 11. AI module

3. Charging

Use the standard USB Type-C data cable to connect to the USB charger to charge the gimbal. During charging, all display lights flash from right to left in a cycle, and all lights turn on when fully charged.

Diagram: Illustration shows a USB Type-C cable connecting the gimbal to a USB charger, depicted as a power outlet symbol.

4. Installing a Mobile Phone

Unfold the cradle head and release the locking state of pitch shaft, heading shaft and phone clip.

Diagram: Three sequential illustrations demonstrate the process of unfolding the gimbal's cradle head, releasing the pitch shaft and heading shaft locking mechanisms, and then securing a mobile phone into the phone clip.

5. Controller Operation Introduction

Diagram: An illustration of the controller with buttons labeled AF, POV, DM. Text indicates pairing behavior.

1. When the controller is attached to the stabilizer: After the stabilizer is powered on, the controller will automatically turn on and pair, while the stabilizer charges the controller.
2. When the controller is separated from the stabilizer: The controller needs to be powered on separately, and it will automatically pair after being turned on.

6. Function of the Button

Power Button: Single Click: Switch between horizontal and vertical shooting. Double Click: Return to the center position/reset the gimbal. Long Press: Power off.

M-Mode: Single Click: Switch modes. When switched to DM push the joystick up or down to enter manual Dream Space mode. Double Click: Enter automatic Dream Space mode, generating a 15-second video.

Joystick: Use the joystick to control the gimbal's movement in four directions (up, down, left, and right), allowing for easy angle adjustments while shooting.

Camera: Single Click: Take a photo / Record video. Double Click: Switch between front and rear cameras [app]. Triple Click: Switch between photo and video mode [app]. Long Press: Start recording video directly [app].

Focusing: Push upwards ([Zoom In] direction) in the app to zoom in. Push downwards ([Zoom Out] direction) in the app to zoom out.

Battery Indicator: Solid Green Light: Battery level is sufficient. Solid Blue Light: Battery level is moderate. Solid Red Light: Battery level is low and needs charging. The battery indicator flashes while charging.

Indicator light: Single Light Flashing: Low battery on the remote, please return it to the handle for use. Signal Light Flashing: Communication between the remote and the main unit is interrupted, please return it to the handle and re-pair for use. Four Lights Flashing in Sequence: Charging in progress.

Diagrams: Visual representations of button functions and indicator light patterns are provided.

7. AI Module Gesture

When the AI tracking module is installed, face the camera and gesture.

• [Open Hand] Activate Tracking
• [Closed Fist] Stop Tracking
• [Light Bulb] Turn On Off Light
• [Phone Orientation] Landscape or Portrait
• [Camera] Start Photo Capture
• [Two Fingers - Peace Sign] Switch Light Mode

Note: After switching between landscape and portrait modes, the AI module will enter a tracking stop state. You need to make the "OK" gesture again to reactivate tracking.

8. Specification

9. Folding

Fold the head and release the locking state of pitch shaft, heading shaft and phone clip.

Diagram: Three sequential illustrations depict the steps for folding the gimbal, involving releasing the pitch shaft, heading shaft, and phone clip.

FCC Compliance

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.