Philips Dynalite PDRDE Revolution Display Euro
Installation Instructions
Important Safety Information
Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Note: The original document contains this warning in multiple languages (French, German, Spanish, Italian, Dutch, Japanese, Chinese, Arabic). The English version is presented here.
Product Dimensions
Display Unit Dimensions: 88 mm (3.46 in) x 88 mm (3.46 in)
Wall Mount Depth: 10 mm (0.40 in) (DACM)
Unit Depth: 38 mm (1.49 in)
Wall Box Compatibility: 77 mm (3 in) x 77 mm (3 in)
Operating Temperature: 0° C (32° F) to 50° C (122° F)
Humidity Limit: ≤90%
Pollution Degree: II
Installation Steps
Step 1: Prepare Wall Mount
Insert the mounting bracket into the wall box.
(Visual Description: Diagram shows a rectangular mounting bracket being slid into an open wall electrical box.)
Step 2: Connect Wiring
Feed the electrical wires through the opening in the mounting bracket. Connect the wires to the appropriate terminals on the bracket.
(Visual Description: Diagram shows wires being connected to screw terminals on the mounted bracket.)
Step 3: Secure Mounting Bracket
Ensure the mounting bracket is securely fastened.
(Visual Description: Diagram shows screws being used to fix the mounting bracket to the wall structure.)
Step 4: Wiring Precautions
Warning: Do not connect inputs to mains power. Ensure correct wiring to prevent interference or damage.
(Visual Description: Diagram shows incorrect wiring connections with red crosses, highlighting the prohibition of connecting inputs to mains. It also indicates "IEC Overvoltage Category III".)
Step 5: Terminal Block Details
The terminal block includes connections for:
- +V (Power Input)
- D- (Data Negative)
- D+ (Data Positive)
- GND (Ground)
- SHLD (Shield)
Specifications:
- Wire Gauge: 0.3-2.5 mm² (22-12 AWG)
- Torque: 0.4 Nm (3.5 Lb-in)
- RS-485 DyNet Power: 12 V ≤ 120 mA or 24 V ≤ 60 mA
- General Terminal Rating: ≤ 2 A
- Compliance: SELV/Class 2 (UL)
(Visual Description: Diagram shows a detailed view of the terminal block with labels and specifications for wire size, torque, and voltage/current ratings for DyNet communication.)
Step 6: Attach Display Unit
Align the display unit with the wall plate and snap it into place.
(Visual Description: Diagram shows the display unit being pushed onto the wall plate until it clicks.)
Step 7: Final Screw Installation
Use screws of appropriate length, ensuring they are inserted correctly (2-3 mm / 0.08-0.12 in depth) to avoid damage.
(Visual Description: Diagram illustrates the correct screw insertion depth and shows an incorrect method with a red cross.)
Step 8: Display Activation
The display will show the interface.
(Visual Description: A simple graphic of the display screen labeled "Display".)
Step 9: System Connection
The display unit connects to the system via RS-485 DyNet.
(Visual Description: Diagram shows a connection line labeled "RS-485 DyNet" linking the display unit to another module in a system.)
Compliance and Safety Notices
Federal Communications Commission (FCC) Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003: CAN ICES-3(B)/NMB-3(B).
Electrical Installation Standards
Installation of a home and building automation and control system shall comply with IEC 60364 (all parts). The temperature limits and current-carrying capacities for the communication wires specified in IEC 60364-5-52 shall not be exceeded.
Laser Product Classification
The Philips Dynalite Revolution Display (PDRDE) is a Class 1 laser product as per IEC60825-1 and EN 60825-1. This device complies with IEC 60825-1 and EN 60825-1 standards.
General Warnings
- Do not connect inputs to mains.
- Disconnect power before connecting or separating modules.
- Refer to the Service Guide for full cleaning recommendations.
