Aigostar Oil Filled Heater

Product Details

Model: 330000JIF

This product is only suitable for well insulated spaces or occasional use.

Description of the heater image: A black, upright, oil-filled radiator heater with multiple fins. It has wheels at the base for mobility and control knobs and an indicator light on the top panel.

Important Safety Measures

When using an electrical appliance, basic precautions should be observed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using the heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials such as furniture, cushions, bedding, paper, clothes, and curtains at least 3 feet (0.9 m) from the heater. Let the heater cool before moving it and use the built-in handle for easy movement.
3. Extreme caution is necessary when the heater is used by or near children or when the heater is left unattended.
4. Always unplug the heater when not in use.
5. Do not operate any heater with a damaged cord or plug, or after the heater malfunctions, or if the heater has been dropped or damaged in any way. Send the unit to the manufacturer for examination, electrical or mechanical adjustment or repair.
6. Do not use the heater outdoors. This product is intended for normal household use only.
7. This heater is not intended for use in bathrooms, laundry areas, or similar damp rooms. Never place the heater where it can fall into a bathtub or other water container.
8. Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar. Arrange the cord away from traffic areas or where it will not be tripped over.
9. To disconnect the heater, turn the controls to OFF and then pull the plug from the outlet.
10. Keep this heater clean. Do not allow any foreign objects to enter the ventilation or exhaust opening, as this may cause electric shock or fire, or damage the heater.
11. To prevent possible fire, do not block air intake or exhaust in any way. Do not use on soft surfaces, like a bed, where openings may be blocked.
12. A heater has arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or personal injury.
14. WARNING: To prevent overheating, do not cover the heater. ?
15. Do not use this heater in the immediate vicinity of a bath, shower, or swimming pool.
16. The heater should not be located immediately below an electrical outlet.
17. If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard.
18. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
19. This heater is filled with a precise amount of special oil. Repairs requiring opening of the oil container must only be made by the manufacturer or its service agent, who should be contacted in case of an oil leak. When scrapping the heater, please observe the regulations for oil disposal.
20. Children under 3 years of age should be kept away unless continuously supervised. Children aged 3 to under 8 years should only turn the appliance on and off if it has been placed or installed in its intended normal operating position and has been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children aged 3 to under 8 years should not plug in, regulate, clean or carry out user maintenance on the appliance.
21. CAUTION: Some parts of this product can become very hot and cause burns. Special attention must be given where children and vulnerable persons are present.
22. Do not use outdoors.
23. Do not use the heater if it has been dropped.
24. Do not use if it shows visible signs of damage.
25. Use this heater on a horizontal and stable surface or fix it to the wall, as needed.
26. This appliance is not suitable for use in damp environments or near water or other liquids such as bathrooms, showers or swimming pools.
27. WARNING: Do not use this heater in small rooms when they are occupied by persons who are unable to leave the room on their own, unless constantly supervised.
28. WARNING: To reduce the risk of fire, keep textiles, curtains or other combustible materials at a minimum distance of 1 m from the air outlet. ?

Part Illustration

The illustration shows an oil-filled radiator heater with various parts labeled:

• Air Inlet (Lufteinlass)
• Indicator Light (Kontrollleuchte)
• Thermostat Knob (Thermostatknopf)
• Power Switch Knob (Netzschalter Drehknopf)
• Cord Wrap (Schnurverpackung)
• Radiating Unit (Strahlungseinheit)
• Air Inlet (Lufteinlass)
• Caster Mount (Caster Montage)

Main Technology Specifications

Power Supply: 220-240V ~ 50Hz

Assembly Instructions

Unpack your heater and find the wheel support plate and butterfly nuts between the fin assemblies.

1. Ensure the heater is unplugged and in the "OFF" position.
2. TURN THE HEATER UPSIDE DOWN.
3. Attach the wheel support plates as shown in Fig. 1. The U-plate is fixed between the last fins and the other is attached under the metal control box. Fix the wheels onto the vertical axis of the two support plates.
4. Insert the butterfly nuts and tighten them.
5. TURN THE HEATER UPRIGHT.

Your heater is now ready for use.

WARNING: Fire hazard. Do not operate the heater without wheel assemblies attached. Operate the heater only in an upright position (wheels on the bottom, controls on top). Any other position could create a dangerous situation. Ensure the surface under the heater is clean and free of obstructions. It is not recommended to place this heater on high-pile carpet or any other surface that obstructs airflow under the heater.

This heater contains a visual alarm to warn that parts of the heater are becoming excessively hot. If the alarm flashes, immediately turn off the heater and check for objects or items near the heater that may be causing the high temperatures. DO NOT OPERATE THE HEATER WITH THE ALARM FLASHING. ?

Operating Instructions

1. Plug the plug into the appropriate outlet.
   • Never use the appliance on a location where it is not level; ensure there are no flammable or easily deformable objects within 1 meter (36 inches).
   • Plug in the plug after setting the thermostat to "MIN" and the selected switches to "OFF".
   • The appliance is not to be covered.
   • The heater is suitable for operation on an AC power supply that has the same voltage as indicated on the nameplate.
2. Turn the power switch to the "Max" position and turn the thermostat to the "High" position; at this moment, the appliance will start to work. When the temperature rises to your satisfaction, turn the thermostat slowly counter-clockwise until the indicator light for the power selection is off, and the room temperature can thus remain constant. If you wish to increase or decrease the room temperature, you can make another adjustment: turn the thermostat clockwise to increase the temperature and counter-clockwise to decrease it, or simply press a power switch to "ON".
3. After use, please first turn the power switch to the "OFF" position, then set the thermostat to the "MIN" position, and unplug the power plug.

NOTES:

• The indicator light only illuminates when the temperature is below the thermostat setting.
• The room must be well sealed; otherwise, it will not yield good results due to heat loss.
• The outlets of the control chamber must be kept ventilated, otherwise, an inadmissible movement of the thermostat may occur.

Cleaning and Maintenance Instructions

1. The electric heater should be cleaned regularly to remove dust from the surface of the fins, as this can affect the radiation effect.
2. Please disconnect the power supply and let the cooler cool down. Wipe off dust with a soft, damp cloth. Do not use detergents or abrasive cleaners.
3. Do not scrape the surfaces of the fins with sharp, hard tools to avoid rusting the surfaces, as the paint may be damaged.

Recycling and Warranty

Correct Disposal of this Product

This marking ♻️ means that this product must not be disposed of with other household waste throughout the EU. To protect the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used appliance, please use the return and collection systems or contact the dealer where the product was purchased. You can take this product for environmentally friendly recycling.

Warranty: 2 YEARS

Company Information

ITALIA MARKET SRL

VIA DELLE INDUSTRIE, 9/1 20883 MEZZAGO(MB), ITALIA

P.IVA: IT10502730962

Website: https://www.aigostar.com

Made in China