Level One Managed Switches Quick Installation Guide

Introduction

This guide provides essential instructions for the quick installation and initial configuration of Level One Managed Switches. It covers the basic steps for setting up the device, whether for rack mounting or desktop placement, and outlines the initial connection and login procedures.

Equipment Installation

The document details two primary installation methods:

• Rack Installation: Steps include verifying rack stability and grounding, attaching L-shaped brackets, positioning the switch, and securing it.
• Working Table Installation: Instructions cover placing the switch on a stable surface, ensuring proper grounding, and connecting the power cord.

Important safety notes regarding power supply and grounding are highlighted.

Initial Configuration

The guide explains how to perform the initial setup:

• Connecting a PC to the switch's console port using a console cable.
• Configuring the PC's serial port settings (e.g., baud rate, data bits).
• Logging into the Command Line Interface (CLI) using default credentials (username: admin, password: admin).

It also provides instructions for connecting and logging into the equipment via Windows and macOS operating systems, including setting IP addresses.

Safety and Disposal

The guide includes important safety instructions, general information about product handling, care, and cleaning. It also provides guidance on proper product disposal according to WEEE regulations.