Philips SPK7407 4000 Series Wireless Mouse User Manual

Function Overview

The mouse features the following components:

• 1. Scroll wheel
• 2. Left and right buttons
• 3. Wireless receiver
• 4. Bluetooth mode 2 indicator
• 5. Bluetooth mode 1 indicator
• 6. 2.4G wireless mode indicator
• 7. Mode switch button
• 8. Optical sensor
• 9. ON/OFF switch [power switch]
• 10. Battery door

2.4G Wireless Connection Guide

1. Push the battery door away.
2. Pull off the battery insulating film. Turn on the [power switch].
3. Take out the receiver and close the battery door.
4. Plug the receiver into the [USB port] of a PC.

Note: The factory default connection mode is 2.4G. If connection is successful, the 2.4G mode indicator will automatically turn off.

Mouse Bluetooth Connection Guide

Note: Ensure the mouse power is on before Bluetooth pairing.

1. Short press the mode switch button to select the Bluetooth mode to be connected; the corresponding indicator light will flash slowly. Long press the Bluetooth mode switch key; the corresponding indicator light will flash quickly, entering the waiting for Bluetooth pairing state.
2. Turn on Bluetooth on your computer or device, search for and select "Philips SPK7407" or "SPK7407", and start Bluetooth pairing until connection is complete.

Notes:

• Bluetooth 5.0 is not supported on Windows 7 and below.
• The device ID for Bluetooth 3.0 is "Philips SPK7407", while for Bluetooth 5.0 it is "SPK7407".

Mode Switching

The mouse has three channels: 2.4G, Bluetooth 1, and Bluetooth 2, allowing connection to three devices simultaneously.

To switch modes: Short press the mode switch button. The corresponding mode indicator will light up for 3 seconds and then turn off. This completes the switch to the selected device. If the mode indicator flashes slowly, it means the mode has not yet been connected.

Packaging Contents

• 1 x Wireless mouse
• 1 x Wireless receiver
• 1 x User manual/warranty card
• 1 x AA battery (inside mouse)

System Requirements

• 1 x [USB port]
• Bluetooth 3.0 / Bluetooth 5.0
• Windows® 7, Windows® 8, Windows® 10 or later
• Android 3.2 and above
• Mac OS 10.5 or later

Technical Specifications

Troubleshooting

• Ensure the [USB wireless receiver] is correctly plugged into the computer's [USB port].
• Verify the computer meets minimum system requirements.
• If the distance between the product and receiver exceeds the effective range, reduce the distance for better performance.

If the problem persists, consult the Philips website or a local retailer for solutions. Do not disassemble the product by force.

Important Notes

• Photoelectric technology accurately detects mouse movement on most surfaces. Avoid using the mouse on reflective, transparent, or uneven surfaces.
• Clean the product with a dry, soft cloth.
• Do not disassemble the product by force.
• Do not direct the light from the bottom of the mouse towards your eyes.
• Keep away from rain, direct sunlight, and fire.
• Do not rinse directly with water.

Legal and Compliance Information

© 2022 Top Victory Investments Limited. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V., used under license. This product is manufactured and sold under the responsibility of Top Victory Investments Limited, which is the warrantor. Specifications are subject to change without notice.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.; use by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names belong to their respective owners.

Made in China

Register your product and get support at: www.philips.com/welcome

Disposal of Product and Packaging Material (WEEE)

This symbol on the product or packaging indicates it must not be disposed of with household waste. Dispose of waste equipment at a designated collection point for recycling electrical and electronic equipment. Contact your local city office, waste disposal service, or retailer for recycling information.

CE Declaration of Conformity

This device complies with Council Directives on Electromagnetic Compatibility (2014/30/EU), RoHS (2011/65/EU), and Radio Equipment (2014/53/EU). This product complies with harmonized standards for Information Technology Equipment as published under EU Directives.

Federal Communications Commission (FCC) Notice

This equipment has been tested and complies with Class B digital device limits per FCC Rules Part 15. Limits are designed for reasonable protection against harmful interference in residential installations. This equipment generates, uses, and radiates RF energy. Improper installation or use may cause harmful interference to radio communications. Interference may not occur in a specific installation.

If interference occurs, try correcting it by:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to a circuit different from the receiver's.
• Consult the dealer or an experienced radio/TV technician.

Unauthorized modifications may void the user's authority to operate the equipment.

This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to: (1) no harmful interference, and (2) acceptance of any received interference.

Commission Fédérale de la Communication (French Compliance)

Cet équipement a été testé et déclaré conforme aux limites des appareils numériques de classe B, aux termes de l'article 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle. Cet appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes:

• Réorienter ou déplacer l'antenne de réception.
• Augmenter la distance entre l'équipement et le récepteur.
• Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.
• Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.

Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU RÈGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.

Warranty and Support Information

Dear customer, Thank you for purchasing a Philips IT accessory product. To ensure reliable after-sales service, please read these instructions carefully. The product warranty period is valid for one year from the date of purchase.

Register your product and get support at: www.philips.com/welcome

Situations not covered by after-sales service:

• Inability to provide a valid warranty card/invoice (unless proof of validity exists) or unauthorized warranty alteration.
• Product model/serial number on warranty card does not match the physical product or lacks distributor seal.
• Product model number, serial number, or production date code has been altered, removed, or is illegible.
• Defects resulting from excessive use beyond intended purpose (e.g., continuous commercial use).
• Damage from failure to use in accordance with product instructions.
• Damage caused by pirated software or computer viruses.
• Damage from accidents, unauthorized repairs, or unauthorized service.
• Damage caused by force majeure (acts of God).
• Product malfunction due to accidental connection loss, signal interference, or other influential factors.
• Normal wear and tear defects or consumable parts.
• Product malfunction because it was not designed, manufactured, or approved for use in the country of operation (e.g., imported products).

If the product functions are defective or unusable, contact your local retailer or:

Email: India.Callcentre@tpv-tech.com
Hotline: 1800 425 6396 (Mon-Sat 10 AM-9 PM, Sun 10 AM-6 PM).

The serial number entered must match the product. This certificate is the primary document for after-sales service; please keep it safe. For technical support, present this warranty card for quality professional service.

Warranty Card Fields