ATEN KE8980MR: 4K Quad-Display KVM over IP Multi-View Receiver

The ATEN KE8980MR is a high-performance KVM over IP Multi-View receiver specifically engineered to empower operators in demanding, mission-critical control room environments. It supports quad-display output (2 HDMI and 2 DisplayPort), each capable of 4096 x 2160 @ 60Hz, providing an expansive and detailed operational view.

Advanced Features

Provides versatile viewing and control modes: Multi-view mode and Operation mode.
For Multi-view mode: Console controls up to 16 video sources on one screen with display modes. Workspace allows saving multiple configuration profiles and switching screen layouts and connection states across four displays via hotkeys. Connection List Panel includes source preview functionality and supports intuitive drag-and-drop to assign sources freely.
For Operation mode: Features ultra-low latency operation, enabling simultaneous monitoring of up to 108 screens. "Push" and "Pull" shares content instantly to/from a single Rx or video wall by just one click. Virtual transmitter independently streams video, audio, USB, and serial sources from different Tx.
Virtual Machine connectivity: VMware®, Microsoft®, and Citrix™™ by using RDP and VNC.
Easily switching to any Virtual Machine or KE Transmitter.
Boundless Switching MX™™ allowing real-time switching between systems simply by moving the mouse freely across displays and windows.
Flexible connections allow multiple extender and matrix connections for multi-display installations.
Advanced Scheduling improves efficiency and saves costs by allowing media playback to be set based on time and date.
Internal and external authentication support: supports LDAP, Active Directory, RADIUS and TACACS+ external authentications.
Advanced User Authorization Settings: administrators can set four access modes of permissions on Tx devices for collaboration or to avoid interference among users.
Configurable user and group permissions for access and control of KVM over IP extenders.
Rx access control: users at the Tx local console can enable/disable Rx access by simply pressing a control button.

Note: These advanced functions are supported when the KE transmitters are paired with KE receivers and managed by CCKM.

Hardware

Features a purpose-designed architecture that combines high performance with energy efficiency, delivering advanced functionality while minimizing power usage.
Optimized power-performance balance providing enterprise-grade functionality with reduced energy demands.
The housing meets IEC 60945 standards for maritime control room use and has passed environmental tests.
Supports Quad-Display Output (2 HDMI and 2 DisplayPort), each resolution up to 4096 x 2160 @ 60Hz.
Network failover: 2 RJ-45 ports for network failover to ensure constant availability for mission-critical applications.
DisplayPort 1.2 compliant.
High-speed USB Storage Transmission support.
Auto-MDIX automatically detects cable type.
Built-in 8KV/15KV ESD protection and 1KV surge protection.

Management

Centralized management software KVM over IP Matrix Manager (CCKM) allows users to easily administer all KE devices with an intuitive web-based GUI.
Supports recording of remotely-accessed computer operations using CCVSR.
OSD (On Screen Display) on the Receiver configures both units.
EDID Expert™™ selects optimum EDID settings for smooth power-up and highest quality display.
Four selectable access modes for multiple simultaneous access (Exclusive/Occupy/Share/View only mode) – administrators can select access modes of permissions on Tx devices to boost collaboration or to avoid interference among users.
RS-232 serial port allows users to connect to a serial terminal for TextMenu, or serial devices such as touch screens and barcode scanners.
Supports Hotkey Commands.
Video Compression Level allows users to increase/decrease the video quality to adjust for appropriate network bandwidth.
Compatible with all KE devices.

Highlights

Category	Description
Over IP Extension	Extends a computer's KVM console any distance over a LAN by connecting the Tx and Rx units to the same network. Extends a computer's KVM console up to 100 meters by directly connecting the Tx and Rx units with a single Cat 5e / 6 cable. Standard IP protocols ensure maximum compatibility with your existing IT infrastructure and staff skill set.
Versatile Viewing & Control Modes	Designed for high-performance control environments, the KE8980MR delivers both multi-view mode for real-time monitoring of up to 16 sources with customizable layouts, and operation mode for seamless, low-latency interaction across multiple displays. Operators benefit from instant Push/Pull content sharing and advanced Virtual Transmitter support for flexible resource access.
Superior Video Quality	Quad-display output (2 HDMI + 2 DisplayPort) supports up to 4096 x 2160 @ 60Hz, powered by an advanced graphics engine for sharp, vivid images regardless of distance.
Reliability and Energy Efficiency	The KE8980MR features dual RJ-45 ports for network failover, ensuring uninterrupted connectivity in the event of a link failure. At the same time, it delivers high performance with low power consumption, enabling efficient long-term operation without compromising system responsiveness or reliability.
Boundless Switching MX™	Enables real-time switching by simply moving the mouse across displays and windows, ideal for rapid response in mission-critical scenarios. Integrated video wall support enhances collaboration and situational awareness.
Advanced Management	The KE8980MR works seamlessly with CCKM to simplify setup and management, while integration with CCVSR enables secure session recording and playback for audits and troubleshooting.
Flexibility	The KVM over IP extender allows users to access, share, and switch full control of Tx-connected computers – from any Rx (KVM console) over the network. It flexibly allows point-to-point, point-to-multipoint, multipoint-to-point, or multipoint-to-multipoint computer to KVM console connections.

Specifications

Category	KE8980MR
Connectors	USB Port: 2 x USB Type A Female (Blue) Console Ports: 2 x USB Type A Female (Blue), 2 x DisplayPort Female (Black), 2 x HDMI Female (Black), 1 x Audio line out/in Jack (Black), 1 x DB-9 Male (Black), 1 x Lockable DC Jack (Black) LAN Ports: 2 x RJ-45 (Blue)
Pushbuttons	Pushbuttons: 1 x Power (Black), 1 x Reset (Black)
LEDs	Power: 1 (Blue) Storage: 1 (Orange)
Emulation	USB
Keyboard / Mouse	USB
Power Consumption	DC 19 V:3.33 W
Video Resolution	Up to four 4096 x 2160 @ 60Hz
Latency	Operation mode: 5ms ~ 48ms, Multi-view mode: < 48ms
Environmental	Operating Temperature: -10 – 50 °C Storage Temperature: -40 – 85 °C Humidity: 10 – 90% RH, Non-condensing
Physical Properties	Housing: Metal Weight: 1.34kg Dimensions (L x W x H): 20.00 x 19.00 x 4.18 cm

ATEN International Co., Ltd.
3F., No. 125, Sec. 2, Datung Rd., Sijhih District., New Taipei City 221, Taiwan
Phone: 886-2-8692-6789 Fax: 886-2-8692-6767
www.aten.com E-mail: marketing@aten.com

Product information is subject to change without prior notice. Released: 07/2025 V1.0 © Copyright 2025 ATEN® International Co. Ltd. ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

	ATEN KE8980MR 4K Quad-Display KVM over IP Multi-View Receiver The ATEN KE8980MR is a high-performance KVM over IP Multi-View receiver supporting quad-display output up to 4K@60Hz. It offers versatile viewing and control modes, low-latency operation, and seamless integration for mission-critical control room environments.
	ATEN KE8980MR 4K Quad-Display KVM over IP Multi-View Receiver Quick Start Guide This guide provides essential information for setting up and operating the ATEN KE8980MR, a 4K Quad-Display KVM over IP Multi-View Receiver. Learn about hardware overview, installation steps, and connectivity.
	ATEN KE8980MR 4K Quad-Display KVM over IP Multi-View Receiver The ATEN KE8980MR is a high-performance KVM over IP receiver delivering 4K resolution across four displays. Ideal for critical control environments, it offers flexible Multi-View and Operation modes, virtual machine support, and seamless integration with ATEN's management solutions for enhanced efficiency and control.
	ATEN KE8980MR 4K Quad-Display KVM over IP Multi-View Receiver User Manual User manual for the ATEN KE8980MR, a 4K Quad-Display KVM over IP Multi-View Receiver designed for mission-critical control rooms. It supports quad-display output, multi-view and operation modes, and seamless integration with ATEN's KE/KX transmitter series and CCKM for enhanced situational awareness and workflow efficiency.
	ATEN KE8980MR 4K Quad-Display KVM over IP Multi-View Receiver Quick Start Guide This Quick Start Guide from ATEN provides essential setup and installation information for the KE8980MR, a 4K Quad-Display KVM over IP Multi-View Receiver, enabling remote control of multiple video sources.
	ATEN KE8980MR 4K Quad-Display KVM over IP Multi-View Receiver User Manual User manual for the ATEN KE8980MR, a 4K Quad-Display KVM over IP Multi-View Receiver. This guide covers installation, configuration, operation, and troubleshooting for the device.
	ATEN KX9980 5K DisplayPort Dual Display KVM over IP Extender The ATEN KX9980 is a high-performance IP-based Dual Display KVM over IP transmitter and receiver system that extends computer keyboard, video, mouse, and USB signals over an intranet. It supports dual 5K DisplayPort video displays with zero latency and offers flexible network connectivity options.
	ATEN KX9970: 5K DisplayPort KVM over IP Extender Datasheet Explore the ATEN KX9970, a high-performance 5K DisplayPort KVM over IP Extender. Learn about its features, hardware specifications, management, security, and more for extending computer consoles over a network.