Zebronics ZEB-DELIGHT
Portable BT Speaker
User Manual
Product Description: A compact, grey, rectangular portable Bluetooth speaker with a fabric grille on the front and a fabric carrying loop. The Zebronics logo is visible on the speaker grille.
Introduction
Dear Consumer,
Thank you for purchasing the ZEB-DELIGHT Portable BT Speaker. Please read the user manual carefully before usage and save it for future reference.
Important Notes:
- Avoid using this product in high temperature and high humidity environments.
- Do not attempt to self-disassemble the product, as this will result in the failure of the warranty.
- Turn off the speaker if it is not being used for a long period of time.
Features
- Wireless BT Connectivity
- Built-in FM Radio
- Supports USB & mSD Card
- Media/Volume Control
- Fabric Finish
- Call Function
- Built-in Rechargeable Battery
Specifications
| Output power (RMS) | 3W |
| BT Version | 5.0 |
| Driver size | 45mm |
| Speaker impedance | 3Ω |
| Frequency response | 80Hz-18kHz |
| S/N Ratio | ≥ 85dB |
| Max Supported USB & micro SD memory size | 32GB |
| Supported Audio formats | MP3 |
| Charging time | 2.5H |
| Playback time | 6H* (*at 50% volume) |
| Product dimension (W x D x H) | 118 x 39 x 79 mm |
| Net. weight | 185g |
Instruction of Buttons
+: Short press to change next track / channel, long press to increase the volume.
-: Short press to change previous track / channel, long press to decrease the volume.
>: Short press to play / pause the track, answer / hang up the call. Long press to reject the call. Double press to redial.
M: Change mode (BT, FM, USB & micro SD).
General Instructions
Bluetooth Connectivity
When the speaker is in BT mode, scan for nearby Bluetooth devices on your phone and connect with the device named "ZEB-DELIGHT". Once connected, a voice prompt will be heard.
USB Mode
Once a USB is inserted, the speaker will detect and automatically start playing songs from the USB (Plug & Play Mechanism).
Micro SD Mode
Once the micro SD card is inserted, the speaker will detect and automatically start playing songs from the micro SD card (Plug & Play Mechanism).
FM Connectivity
- Switch the speaker to FM mode using the mode (M) button.
- Connect the micro USB cable to the speaker and leave the other end open; this acts as the FM antenna.
- Press the Play/Pause button once to scan the FM Channels.
- Once the scanning is done, the speaker will start playing from the first saved channel.
- To change the channels, you can use the +/- buttons.
TWS Mode
Turn on both ZEB-DELIGHT Speakers. Ensure the speakers are in BT mode. Press and hold the "M" key on any one of the speakers to activate TWS mode. The speakers will then automatically connect to each other. Search for nearby BT devices on your mobile and tap on the BT name ZEB-DELIGHT to connect.
Charging Instruction
Connect the micro USB plug to the speaker and the other end of the charging cable to a DC 5V Adapter. A red LED will glow while charging, and the LED will turn OFF once charging is complete.
