Corsair Crystal Series 460X PC Case
Thank you for purchasing the Crystal Series 460X Tempered Glass, Compact-ATX Mid-Tower PC Case. With its tempered glass front and side panel, the Corsair Crystal Series 460X is a compact and gorgeous ATX case with great cooling potential. Wires and drives are stowed away under a removable two-piece PSU and HDD cover. The Direct Airflow Path design ensures that fans don't have to work to get air through unused drive cages, but can gently direct air to your hottest components and keep things quiet and still cool.
Case Specifications
| Specification | Value |
|---|---|
| Length | 440mm |
| Width | 220mm |
| Height | 464mm |
| Maximum GPU Length | 370mm |
| Maximum CPU Cooler Height | 170mm |
| Maximum PSU Length | 200mm |
Fan Locations
- Front: 2 x 140mm / 3 x 120mm
- Top: 2 x 140mm / 120mm
- Rear: 120mm
Radiator Compatibility
- Front: 280mm / 360mm
- Top: 240mm
- Rear: 120mm
Accessory Kit Contents
The accessory kit includes the following items:
- Cable ties (x6)
- Motherboard/HDD screws (x16)
- SSD/ODD screws (x16)
- SSD pan head screws (x4)
- Short fan screws (x16)
- Long fan screws (x4)
- Motherboard standoff (x1)
Case Features
The case features include:
- Tempered glass side panel
- Solid side panel
- Removable, modular PSU and 3.5" Drive Covers
- Modular HDD Cage & Sleds
- Rear SSD mounts
- AF140L front intake fan
- AF120L rear exhaust fan
- CPU backplate cutout, and built-in cable routing cutouts with grommets
- Dust filters
- Top cover
- Front I/O Panel (x2 USB 3.0, Headphone, Mic, Power, and Reset)
- (x7) Expansion slots
- Removable tempered glass front fascia
- (x3) SP120 RGB LED fans (460X - RGB)
Installation Steps
1. Removing the Side Panels
Remove the thumb screws and pull the side panel off.
2. Installing the Motherboard
Snap the motherboard's I/O shield into the cutout. Align the motherboard with the standoffs in the case. Secure with the included screws (labeled 'b').
3. Installing HDDs
Step 1: Place the drive into the 3.5" drive tray. Step 2: Slide the drive and rail assembly into the HDD cage from behind the motherboard as shown.
4. Installing SSDs
Slide the 2.5" drive into the tray until it snaps into place.
5. Installing the Power Supply
Install the PSU into the lower chamber of the case, and secure with four screws from behind.
6. Installing PCI-E/PCI Card(s)
1. Remove thumbscrews and corresponding slot covers. 2. Install the expansion card and secure with thumbscrews.
7. Removing the Front Fascia
Unscrew the front panel, then gently but firmly pull away from the chassis.
8. Installing the Front I/O Connectors
Refer to your motherboard's manual for front panel header locations and pin-outs. The connectors include: USB 3.0, HD AUDIO, HDD LED, POWER SW, POWER LED, RESET SW, POWER LED +.
9. Using RGB Fan Controller (460X - RGB)
Refer to the included RGB Fan controller Quick Start Guide for detailed instructions.
Frequently Asked Questions
- Does the polarity matter with the I/O panel's power and reset header?
No, only the LED headers. - Who should I contact if I received my case damaged or one of the fans is no longer working?
Please go to corsair.force.com and request an RMA so that we can replace the damaged part(s). - Where can I mount a fan?
Fan Mount Locations
| Location | Compatibility |
|---|---|
| Front | 3x120mm, 2x140mm |
| Top | 2x140mm/120mm |
| Rear | 120mm |
| Bottom | X |
| Side | X |
| Mid | X |
To learn more about this case, visit the product page at corsair.com.
