Sub-Zero PRO48 Wiring Diagrams/Schematics

Model: PRO48

Part Number: 3758388 REV D

WARNING

This wiring information is provided for use by qualified service personnel only. Disconnect appliance from electrical supply before beginning service. Be sure all grounding devices are connected when service is complete. Failure to observe the above warnings may result in severe electrical shock.

Wiring Diagram Overview

The following diagrams illustrate the electrical connections and components for the Sub-Zero PRO48 refrigerator.

Page 1: High Voltage Wiring

This page details the high voltage connections, including the power supply cord, compressor, variable speed control box, icemaker, water valve, and various zone lighting and heaters. It shows the flow of power to different components and zones within the appliance.

Page 2: Low Voltage Wiring and Sensors

This page focuses on the low voltage wiring, including connections to the main control board, sensors (refrigerator and freezer evaporator, cabinet, ambient, condenser), fan motors, and door heaters. It highlights the sensor inputs and their corresponding jacket cable markings.

Page 3: Wiring Schematic

This page provides a schematic view of the entire system, including the main control board, various switches (water filter, door, drawer), motors (condenser fan), valves (water valve), heaters (fill tube, trough, defrost), and compressors. It also shows the connections for thermistors and side lights.

Page 4: Troubleshooting and Control Circuits

This page covers troubleshooting steps, including how to enter and exit Service Mode. It also details the control circuits, listing the connections to the main control board for various sensors, switches, and outputs. The Service Mode Menu options for diagnostics, status, thermistors, activation, statistics, and model information are also presented.

Control Circuits Detail

The main control board serves as the central hub for all electrical operations. Key connections include:

Power Input: L1, Neutral, 12 VDC Power, Ground Return
Zone Control: Speed signals and tachometer inputs for Zone 1, Zone 3, and Zone 4 evaporator fans.
Sensors: Inputs for various thermistors (evaporator, cabinet, condenser, ambient) for all zones.
Outputs: Control signals for compressors, fans, heaters (defrost, trough, fill tube, door, accent lights), water valves, and icemaker accessories.
Communication: 485 Network connection.
User Interface: Connections for keypad and display boards.

Service Mode Menu

The Service Mode allows for diagnostics and configuration. Key functions include:

	Sub-Zero Integrated 736 Series Wiring Diagrams and Schematics Technical wiring diagrams and schematics for Sub-Zero Integrated 736TCI, 736R, and 736TFI refrigerator models, including control board details and safety warnings for service personnel.
	MW24 Microwave Oven Wiring Diagrams and Schematics Detailed wiring diagrams and schematics for the MW24 microwave oven, covering pictorial wire diagrams, power unit circuit, and PC board layout for models prior to serial number 1200154.
	Sub-Zero Built-In (600-3) Series Wiring Diagrams and Schematics This document provides comprehensive wiring diagrams and schematics for Sub-Zero Built-In 600-3 Series refrigerators, covering models 601R-3, 601RG-3, 601F-3, 611-3, 650-3, 611G-3, 650G-3, 632-3, 642-3, 661-3, 685-3, and 695-3. It includes detailed component connections, control board summaries, and essential safety warnings for qualified service personnel.
	Sub-Zero Pro-Series 648PRO Troubleshooting Guide This guide provides detailed troubleshooting steps and service mode operations for the Sub-Zero Pro-Series 648PRO refrigerator. It covers entering service mode, navigating sub-modes like diagnostics, operational status, model information, and version information, as well as error code explanations and sealed system pressure tables.
	Sub-Zero ICBID-RP Integrated Drawer Refrigerator Wiring Diagrams Detailed wiring diagrams and board summary for Sub-Zero ICBID-RP Integrated Drawer Refrigerators, including models ICBID-24R, ICBID-27R, ICBID-30RP, and ICBID-36R. Covers high voltage and low voltage connections, component identification, and control board summaries.
	Sub-Zero 400 Series Model 424 & 427 Wiring Diagrams and Schematics Detailed wiring diagrams and schematics for Sub-Zero 400 Series refrigerators, including models 424 and 427, with serial numbers prior to and starting with #1944319. Covers high and low voltage circuits, component layouts, and control board summaries.
	Sub-Zero 648PRO Refrigerator/Freezer Technical Data Technical specifications and service data for the Sub-Zero 648PRO refrigerator and freezer, including refrigerant charge, operating pressures, compressor details, defrost systems, heaters, thermistors, and door heaters.
	Sub-Zero 700TC-3 Wiring Diagram Detailed wiring diagram for the Sub-Zero 700TC-3 refrigerator, including component connections, wire colors, and control board details. This document is intended for qualified service personnel.