Husqvarna QC330, QC500 Battery Chargers
Operator's Manual
Product Overview
The Husqvarna QC330 and QC500 are battery chargers designed for Husqvarna original batteries. The system includes a battery, a battery charger, and an operator's manual.
Key Components:
- 1. Battery: The power source for the equipment.
- 2. LED indicator for the state of charge: Displays the battery's charge level.
- 3. Warning LED: Indicates potential issues.
- 4. Battery indicator button: Used to check battery status.
- 5. Battery charger: The device used to charge the battery.
- 6. Charging LED: Indicates the charging status.
- 7. Error LED: Indicates an error condition.
- 8. Power plug: Connects the charger to the power outlet.
- 9. Operator's manual: Provides instructions for use.
Symbols on the Product
! Warning: Be careful and use the product correctly. Incorrect use can cause serious injury or death.
[Book Symbol]: Read the operator's manual carefully and ensure you understand the instructions before use.
CE Marking: Indicates compliance with applicable EC directives.
[Recycling Symbol]: The product or its packaging is not domestic waste. Recycle it at an appropriate disposal location for electrical and electronic equipment.
[Rain Symbol]: Keep the unit away from water and rain.
[House Symbol]: Use and keep the battery charger indoors only.
Safety Definitions
Warnings, cautions, and notes are used to highlight important information in the manual.
WARNING: Indicates a risk of injury or death if instructions are not followed.
CAUTION: Indicates a risk of damage to the product, other materials, or the adjacent area if instructions are not followed.
Note: Provides necessary additional information for specific situations.
Important Safety Instructions
- Only use Husqvarna QC330 or QC500 chargers with Husqvarna original batteries.
- Batteries are software encrypted.
- Do not use non-rechargeable batteries.
- Do not attempt to disassemble or repair the battery charger.
- Do not connect the battery charger terminals to metal objects.
- The charger uses a C17 standard sheet cord set.
- Use an approved, grounded mains socket that is not damaged.
- Regularly examine the power cord for damage. Immediately disconnect the charger if the power cord is damaged.
- If the power cord is damaged, have it replaced by an approved service agent.
- Do not lift the battery charger by the power cord. To disconnect, pull the power plug, not the cord.
- Keep all cables and extension leads away from water, oil, and sharp edges. Ensure the power cord is not caught in doors, fences, or similar objects.
- Do not clean the battery or charger with water.
- Keep the battery charger away from children.
- Do not use defective or damaged chargers or batteries.
- Do not use the battery charger during thunderstorms.
- Only use the battery charger indoors in a well-ventilated environment with the correct temperature.
- Keep the battery charger away from sunlight. Do not use outdoors or in wet conditions.
- Do not operate the charger with wet hands.
- Do not use the charger near flammable materials or materials that can cause corrosion. Disconnect the charger in case of smoke or fire.
- Do not cover the charger during operation.
- This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning safe use and understand the associated hazards. Children should not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
Operation
Use the battery charger only when the ambient temperature is between 5 °C (41 °F) and 40 °C (104 °F).
Always use Husqvarna BLi100, BLi200, BLi300, BLi200X, BLi550X, or BLi950X batteries.
To Charge the Battery
- Connect the battery charger to a power outlet. The charging LED flashes once.
- Connect the battery to the battery charger. The charging LED turns on.
- When the battery is fully charged, remove it from the charger. Press the battery indicator button to check the charge status. When all LED indicators light up, the battery is fully charged.
- Pull the power plug to disconnect the charger from the power outlet. Do not pull the power cord.
CAUTION: Ensure the battery, charger, and battery terminals are clean and dry. Do not place a dirty or wet battery in the charger.
CAUTION: Only connect the charger to a power outlet with the voltage and frequency specified on the rating plate.
Troubleshooting
Condition | Possible Faults | Possible Procedure |
---|---|---|
Charging LED flashes green. | Temperature deviation; battery is too cold or too hot to use or charge. | Let the battery cool down or warm up. Once the battery reaches the correct temperature, it can be used or charged. Use the charger in ambient temperatures between 5 °C (41 °F) and 40 °C (104 °F). |
Charging LED is red. | Permanent battery charger error. | Contact your dealer. |
Charging LED flashes red. | Defective battery. | Contact your dealer. |
Transportation and Storage
- Secure the product during transport to prevent damage and accidents.
- Keep the product in a locked area, out of reach of children and unauthorized persons.
- Place the product in a dry, frost-free, clean location with adequate temperature.
- Store the product in areas where the ambient temperature is between 5 °C (41 °F) and 25 °C (77 °F). Keep the product away from sunlight.
- Keep the battery away from the battery charger during storage.
Disposal
Husqvarna products are not household waste and must be disposed of according to the instructions in this manual.
- Obey applicable local disposal requirements and regulations.
- Recycle the battery charger and packaging at an appropriate disposal location.
- Contact your local Husqvarna dealer for more information on recycling and disposing of the battery.
Technical Data
For technical data, refer to the rating plate of the battery charger.