Husqvarna 40-USB150X USB Charger Operator's Manual

Product Overview

This section provides an overview of the Husqvarna 40-USB150X USB charger and its components.

The charger unit features a robust design with clear indicators and ports for charging batteries and USB devices.

Components:

• 1 USB charger: The main charging unit.
• 2 Bi-directional USB-C PD port: Supports input and output power up to 100W.
• 3 Single directional USB-C PD port: Supports output power up to 45W.
• 4 Charging and error indicator: Located on the USB charger, displays charging status and errors.
• 5 Discharge mode button: Used to switch between charging modes (e.g., for USB devices).
• 6 USB cable: For connecting devices and power adapters.
• 7 USB power adapter: Connects the USB charger to a power outlet.
• 8 Battery: Refers to Husqvarna's rechargeable batteries, such as the BLi-X 36V.

Symbols and Safety Definitions

Understanding the symbols and definitions used in this manual is crucial for safe operation.

Symbols on the Product:

• ⚠️ Warning: Be careful and use the product correctly. This product can cause serious injury or death to the operator or others.
• ? Read Manual: Read the operator's manual carefully and ensure understanding before use.
• CE Mark: Indicates conformity with applicable EC directives.
• UKCA Mark: Indicates conformity with applicable UK regulations.
• ♻️ Recycling Symbol: The product or packaging is not domestic waste and should be recycled at an appropriate location for electrical and electronic equipment.
• ? Indoor Use Only: Use and keep the product indoors only.
• Note: Other symbols/decals may refer to certification requirements for specific commercial areas.

Safety Definitions:

Warnings, Cautions, and Notes are used to highlight important information:

• WARNING: Used if there is a risk of injury or death for the operator or bystanders if instructions are not obeyed.
• CAUTION: Used if there is a risk of damage to the product, other materials, or the adjacent area if instructions are not obeyed.
• Note: Used to provide more information necessary in a given situation.

Important Safety Instructions

Read all safety warnings and instructions. Failure to obey may result in electrical shock, fire, or serious injury.

• Only use original Husqvarna batteries with the charger. Batteries are software encrypted.
• Do not use non-rechargeable batteries.
• Never attempt to disassemble or repair the USB charger or battery.
• Avoid connecting the charger terminals to metal objects.
• Use only approved USB power adapters and USB cables that are not damaged.
• Immediately disconnect the USB charger if the USB cable is damaged and replace it.
• Do not lift the USB charger by the USB cable. To disconnect from a power outlet, pull the power plug.
• Keep all cables and extension leads away from water, oil, sharp edges, and potential hazards like doors or fences.
• Do not clean the charger or battery with water.
• Do not use a damaged USB charger or battery.
• Do not use the USB charger when there is a risk of lightning.
• Operate the charger indoors only, in an environment with good airflow and correct temperature.
• Keep the charger away from direct sunlight and do not use it outdoors or in wet conditions.
• Do not operate the charger with wet hands.
• Keep the charger away from flammable materials or materials that can cause corrosion.
• In case of smoke or fire, remove the battery and disconnect the USB cable from the charger.
• Do not place any cover on the USB charger during operation.
• This appliance may be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, provided they are given supervision or instruction on safe use and understand the hazards. Children must not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.

Operation

Follow these instructions for charging Husqvarna batteries and USB devices.

To charge a Husqvarna BLi-X 36V battery:

Ensure the battery, USB charger, and terminals are clean and dry. Do not connect if dirty or wet.

• Temperature Range: Use the charger only when the ambient temperature is between -10 °C (14 °F) and 40 °C (104 °F). The battery will not charge if its temperature is below 0 °C (32 °F) or above 50 °C (122 °F).
• Step 1: Connect the USB charger to a USB power adapter using a USB cable. Ensure the cable is connected to the bi-directional port (port 2) on the USB charger.
• Step 2: Connect the power adapter to a power outlet. The charging indicator on the USB charger will flash red once, then green once, then yellow once.
• Step 3: Connect a battery to the USB charger. When correctly connected, the charging indicator on the USB charger will show a solid green light.
• Step 4: Check the battery's charging indicators to confirm the battery is fully charged.
• Step 5: Remove the battery from the USB charger and disconnect the power adapter from the outlet.

Note: The default mode of the charger is to charge a Husqvarna BLi-X 36V battery. The discharge mode button does not need to be pressed to start battery charging.

To charge a USB device:

• Step 1: Use a USB cable to connect your USB device to a port on the USB charger. Output power is available from both USB ports. Select the power level optimal for your device.
• Step 2: Connect a battery to the USB charger, ensuring it is fully seated.
• Step 3: Press the discharge mode button on the USB charger. The charging indicator on the USB charger will show a green light, and the charging of the USB device will begin.

Note: The default mode is battery charging. To charge a USB device, the discharge mode button must be pressed.

When charging is complete, long-press the discharge mode button until the indicator turns off, or remove the battery from the charger to prevent loss of battery charge level.

Troubleshooting

Refer to this table for common issues and their solutions.

Transportation and Storage

• Before transportation or storage, disconnect the power plug and remove the battery from the charger.
• Secure the product properly during transportation to prevent damage and accidents.
• Store the product in a locked area to prevent unauthorized access by children or other persons.
• Storage Conditions: Store the product in a dry, frost-free, and clean space with the correct temperature. Recommended storage temperature is between 5 °C (41 °F) and 25 °C (77 °F). Keep the product away from sunlight. Keep the battery separate from the USB charger during storage.

Disposal

Husqvarna products are not considered domestic waste and must be disposed of according to the instructions in this manual.

• Obey local disposal requirements and applicable regulations.
• Recycle the USB charger and its packaging at an approved disposal location.
• For more information on recycling and discarding batteries, consult your local Husqvarna dealer.

Technical Data

For detailed technical data, refer to the rating plate on the USB charger.

Approved batteries for the USB charger: