Renault Manual Service Reset

Oil Level Indicator

The lamp illustrated is an oil level low warning indicator and not a service interval indicator. When the engine oil is at the correct level, this lamp will automatically extinguish.

Diagram Description: A dashboard instrument cluster showing a speedometer with a needle indicating speed, an odometer displaying 'km', and a fuel gauge. A separate indicator light shows a symbol that resembles an oil can with a drip, labeled 'OIL'.

Malfunction Indicator Lamp (MIL)

The lamps illustrated above are Malfunction Indicator Lamps (MIL) and not service interval indicators. When illuminated, there is a problem with the vehicle. Refer to manufacturer's documentation for further information.

Diagram Description: Two dashboard instrument cluster views. The first shows a speedometer and tachometer. A warning light labeled 'SERV' is illuminated. The second view shows a speedometer with a needle, an odometer, and a warning light labeled 'SERVICE'.

Clio III (models with trip computer; 2006 onwards) / Scenic II (models with trip computer; 2003 onwards)

Procedure to reset service interval:

1. Switch ignition ON.
2. Press and release display reset button A or B on the tip of the wiper lever until the 'Distance Before Next' service information is displayed.
3. Continue to depress the button for 10 seconds until the display shows the distance to next service permanently. The indicator will then show the appropriate service interval (e.g. 6000 miles/10000 km).
4. Release the reset button.
5. Switch ignition OFF.

Diagram Description: A close-up view of a car's steering wheel and dashboard, highlighting the wiper stalk. Buttons labeled 'A' and 'B' are indicated on the tip of the stalk.

Laguna (models with trip computer; 1994 - 1998)

Procedure to reset service interval:

1. Switch ignition ON.
2. Press reset button A until spanner icon flashes.
3. Continue to depress the button until the spanner icon stops flashing and remains illuminated. The indicator will show the appropriate service interval (e.g. 6000 miles/10000 km).
4. Release the reset button.
5. Switch ignition OFF.

Diagram Description: A dashboard instrument cluster showing a speedometer with a needle, an odometer, and a fuel gauge. A spanner icon is shown illuminated in the display area.

Laguna II (2001 onwards)

Procedure to reset service interval:

1. Switch ignition ON.
2. Repeatedly press reset button A until spanner icon flashes and the distance remaining until the next service appears in the odometer display.
3. Press and hold button B until the display has flashed 8 times.
4. Release button B. The new service interval is now displayed.
5. Switch ignition OFF.

Diagram Description: A view of the car's dashboard and center console, showing buttons labeled 'A' and 'B' near the gear stick and dashboard controls.

Megane II (models with trip computer; 2003 onwards)

Procedure to reset service interval:

1. Switch ignition ON.
2. Press and release display reset button A on the tip of the wiper lever until the service information is displayed.
3. Press button B for 10 seconds until the display shows the next service interval permanently. The indicator will then show the appropriate distance before the next service (e.g. 6000 miles/10000 km).
4. Release the reset button.
5. Switch ignition OFF.

Diagram Description: A close-up view of a car's steering wheel and dashboard, highlighting the wiper stalk. Buttons labeled 'A' and 'B' are indicated on the tip of the stalk.

Safrane

Procedure to reset service interval:

1. Press and hold button A.
2. Switch ignition ON.
3. Continue to depress the button until the spanner icon stops flashing and remains illuminated. The indicator will show the appropriate service interval (e.g. 6000 miles/10000 km).
4. Release the reset button.
5. Switch ignition OFF.

Diagram Description: A dashboard instrument cluster showing a speedometer with a needle, an odometer, and a fuel gauge. A spanner icon is shown illuminated in the display area.

Vel Satis

Procedure to reset service interval:

1. Switch ignition ON.
2. Repeatedly press reset button A until spanner icon flashes and the distance remaining until the next service appears in the odometer display.
3. Press and hold button B until the display has flashed 8 times.
4. Release button B. The new service interval is now displayed.
5. Switch ignition OFF.

Diagram Description: A view of the car's dashboard and center console, showing buttons labeled 'A' and 'B' near the gear stick and dashboard controls.