Canon imageFORCE C3150 Multifunctional Printer
Declaration of Conformity
Manufacturer: CANON INC.
Address: 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Authorized Representative in UK: CANON (UK) LTD.
Address: 4 Roundwood Avenue, Stockley Park, Uxbridge, UB11 1AF, U.K.
Product Identification
Model Number: F821300
Sales Name: imageFORCE C3150
Product Type: Multifunctional Equipment / Multifunctional Printer
Included Accessories/Options:
- Auto Document Feeder (F713500/F716300)
- Reader (F713400)
- Cassette Pedestal (F327511/F327512)
- Paper Deck (F281200)
- Buffer Pass Unit (F281532)
- Booklet Finisher (F281342)
- Staple Finisher (F281341)
- Staple Finisher Lite (F281732)
- Puncher (F281060)
- Inner Finisher (F281680)
- Inner Puncher (F281430)
- FAX Board-BR1
- WLAN module (FM3L998)
Declaration of Conformity
This declaration of conformity is issued under the sole responsibility of the manufacturer. We declare that the product(s) is (are) in conformity with essential requirements of UK Regulations.
Applicable UK Regulations and Standards
| UK Regulation(s) | Reference of Standard(s) and Amendment(s) |
|---|---|
| The Electrical Equipment (Safety) Regulations 2016 (S.I. 2016 No. 1101) | BS EN62368-1:2014 BS EN62311: 2008 |
| The Electromagnetic Compatibility Regulations 2016 (S.I. 2016 No. 1091) | BS EN55032:2015+A11:2020 ClassB BS EN55035:2017+A11:2020 BS EN61000-3-2: 2014 BS EN61000-3-3: 2013 |
| The Radio Equipment Regulations 2017 (S.I. 2017 No. 1206#) (# Only for Models with Wireless LAN functionality) | EN 300 328 V2.2.2 EN 301 489-17 V3.2.4 EN 18031-1:2024 * EN 18031-2:2024 * EN 301 893 V2.1.1 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (RoHS) (2012 No. 3032) | EN IEC 63000:2018 |
| The Ecodesign for Energy-Related Products Regulations 2008 No. 1275 (Commission Regulation No 1275/2008 as amended) | BS EN 50564:2011 N/A (Product information requirements only) for No 2019/2020 |
Notes and Quality Management
- The quality system covering the production is implemented according to ISO 9001-series (EN 29001-series) or monitored based on appropriate measures.
- The internal design control system is implemented according to ISO 14000-series and monitored based on appropriate measures.
- Contents marked with an asterisk (*) are those added to previous Declarations of Conformity.
