MOBILE ELECTRONICS PRODUCT SUMMARY
JANUARY 2016
SUBWOOFER AMPLIFIERS
| Model | Features |
|---|---|
| THE EPICENTER® 1200 POWER AMPLIFIER Hi-Power THE EPICENTER® Subwoofer Power Amplifier | Class D Monoblock Subwoofer Amplifier • High Power • 300 watts x 1 @ 4 Ohms • 600 watts x 1 @ 2 Ohms • 1200 watts x 1 @ 1 Ohm • THE EPICENTER® Bass Restoration • MILCTM clip detection circuit (Patent Pending) • Speaker level inputs with GTO™ Signal Sensing • PFM Subsonic Filter • 24 dB / Octave Linkwitz-Riley Selectable Crossover • Dash Mount ACR-3 level control included |
| THE EPICENTER® 600 POWER AMPLIFIER Hi-Power THE EPICENTER® Subwoofer Power Amplifier | Class D Monoblock Subwoofer Amplifier • High Power • 150 watts x 1 @ 4 Ohms • 300 watts x 1 @ 2 Ohms • 600 watts x 1 @ 1 Ohm • THE EPICENTER® Bass Restoration • MILCTM clip detection circuit (Patent Pending) • Speaker level inputs with GTO™ Signal Sensing • PFM Subsonic Filter • 24 dB / Octave Linkwitz-Riley Selectable Crossover • Dash Mount ACR-3 level control included |
Image of the AudioControl THE EPICENTER® 1200 subwoofer amplifier, shown with its cover removed, highlighting its heatsink and front panel controls.
Image of the AudioControl THE EPICENTER® 600 subwoofer amplifier, shown with its cover removed, highlighting its heatsink and front panel controls.
MULTI-CHANNEL AMPLIFIERS
| Model | Features |
|---|---|
| D-4.800™ MATRIX DSP AMPLIFIER 4/3/2 Channel Matrix DSP Amplifier | 4/3/2 channel high power amplifier with Matrix DSP • 4 x 200 watts @ 2 ohms • 4 x 125 watts @ 4 ohms • Bridgeable • Line level outputs • AccuBASS® • MILCTM Source Clip Detection • GTO™ Signal Sense • Premium OEM Integration • Signal summing • Configurable 24 dB/octave crossovers • Optional ACR-3 Assignable Remote Level & Preset Control |
| LC-4.800™ MULTI-CHANNEL AMPLIFIER 4/3/2 Channel High-Power Amplifier | 4/3/2 channel high power amplifier • 4 x 200 watts @ 2 ohms • 4 x 125 watts @ 4 ohms • Bridgeable • Line level outputs • AccuBASS® • MILCTM Source Clip Detection • GTO™ Signal Sense • Premium OEM Integration • Signal summing • Configurable crossovers • Optional ACR-3 Assignable Remote Level & Preset Control |
Image of the AudioControl D-4.800 4/3/2 channel high power Matrix DSP amplifier, shown with its cover removed, featuring 'NEW!' branding.
Image of the AudioControl LC-4.800 4/3/2 channel high power amplifier, shown with its cover removed, featuring 'NEW!' branding.
FACTORY SYSTEM UPGRADE
| Model | Features |
|---|---|
| DQ-61™ 6-Ch EQ, Line Output Converter, Signal Delay & AccuBASS | Six channels of active speaker level inputs • AccuBASS® to correct for factory bass roll-off • Independent front, rear and sub equalization • Signal Delay to put the speakers in acoustic alignment • Internal channel summing • GTO™ signal sensing turn-on with remote out • Dash Mount ACR-3 Level Control Included |
| LCQ-1™ 6-Ch EQ, Line Output Converter & AccuBASS | Six channels of active speaker level inputs • Independent front, rear and subwoofer equalization • AccuBASS® (patent pending) to correct for factory bass roll-off • Internal channel summing • GTO™ Signal Sensing turn-on system with remote out • Optional Dash Mount ACR-2 Level Control (sold separately) |
| LC2i™ 2-Ch Line Output Converter & AccuBASS | Two channel active speaker level input • AccuBASS® with variable threshold and gain • Dual Outputs (one fixed, one variable) • 400 watts per channel power handling capability • GTO™ turn-on circuit with remote out • Output level controls • Optional Dash Mount ACR-1 Level Control (sold separately) |
| LC6i™ 6-Ch Line Output Converter & Summing | Accepts up to six channels of active speaker level input • 6 output channels • Internal summing jumpers • AutoMode™ inputs allow two or four inputs to output to four or six output channels • GTO™ signal sensing inputs with remote out • Output level controls • Optional Dash Mount ACR-1 Level Control (sold separately) |
| LC7i™ 6-Ch Line Output Converter & Internal Summing & AccuBASS | Six channels of active speaker level inputs • AccuBASS® to correct for factory bass roll-off • Compact easy mount chassis • Internal channel summing • AutoMode™ inputs allow 2 or 4 inputs to output to 4 or 6 output channels • GTO™ signal sensing turn-on system with remote out • Optional Dash Mount ACR-1 Level Control (sold separately) |
| LC8i™ 8-Ch Line Output Converter, Aux Input & Internal Summing | Accepts up to eight channels of active speaker level input • Auxiliary stereo input • Dash control provides adjustment for auxiliary & subwoofer level • Internal channel summing • AutoMode™ • GTO™ signal sensing inputs with remote out • Dash Mount ACR-3 Level Control / Source Switch included |
Images of the AudioControl DQ-61, LCQ-1, LC2i, LC6i, LC7i, and LC8i units.
LINE DRIVERS
| Model | Features |
|---|---|
| MATRIX™ PLUS 6-Channel Line Driver with Assignable Inputs/Outputs | Six input and output channels • 24dB of signal gain • 13 volts peak output • Assignable inputs and outputs allow for signal routing (ie. two input channels drive six output channels) • Signal voltage indicator LEDs • High headroom PWM power supply • Selectable ground isolation • Low impedance outputs for multiple loads • Optional dash mounted ACR-1 remote level control (sold separately) |
| OVERDRIVE™ PLUS 2-Channel Line Driver with 24dB of Signal Gain | Two input and output channels • 24dB of signal gain • 13 volts peak output • High headroom PWM power supply • Selectable ground isolation • Power and Voltage LEDs • Low impedance outputs for multiple loads • Optional dash mounted ACR-1 remote level control (sold separately) |
Images of the AudioControl MATRIX™ PLUS and OVERDRIVE™ PLUS line drivers.
DIGITAL SIGNAL PROCESSORS
| Model | Features |
|---|---|
| DM-810™ Eight by Ten Channel Matrix DSP Processor | Matrix DSP Processing • Eight channels In • Ten channels out • Active speaker level inputs • Signal summing • Line level inputs and outputs • Digital inputs • AccuBASS® • MILCTM source clip detection • GTO™ signal sense • Equalization • Signal Delay • Real time analyzer • Configurable 24 dB/Octave Linkwitz-Riley Crossovers • Optional ACR-3 Assignable Remote Level & Preset Control |
| DM-608™ Six by Eight Channel Matrix DSP Processor | Matrix DSP Processing • Six Channels In • Eight Channels Out • Active speaker level inputs • Signal summing • Line level inputs and outputs • Digital inputs • AccuBASS® • MILCTM source clip detection • GTO™ signal sense • Equalization • Signal Delay • Real time analyzer • Configurable 24 dB/Octave Linkwitz-Riley Crossovers • Optional ACR-3 Assignable Remote Level & Preset Control |
Images of the AudioControl DM-810 and DM-608 digital signal processors, both marked 'NEW!'
BASS RESTORATION PROCESSORS
| Model | Features |
|---|---|
| THE EPICENTER® Bass Restoration Processor | Bass Restoration Processor • Intelligent logic circuits • Programmable Frequency Match (PFM) filter • Balanced inputs • ParaBASS controls for tuning the bass restoration effect • Bass maximizing light • Bass Maximization Circuit • Adjustable Subsonic Filter • Available in Espresso Black or Sierra White • Dash Mount ACR-1 for bass restoration included |
| THE EPICENTER® PLUS Bass Restoration Processor With Speaker Level Inputs/AUX | Bass Restoration Processor with auxiliary input • Active speaker level inputs • 400 watt power handling capability • Pre-Amp Inputs for aftermarket applications • Stereo auxiliary input • GTO™ signal sensing • Adjustable Subsonic Filter • Bass Maximization Circuit • 12 volt trigger output • Dash Mount ACR-2 for bass restoration and input selection included |
| THE EPICENTER® InDASH In-Dash Bass Restoration 160dB SPL Microphone & Display | InDash version of The Epicenter® Bass Restoration Processor • Built-in 160 dB capable microphone & Hi-SPL display • Selectable display switching monitors vehicle electrical system • ParaBass equalization circuitry • Line level & active speaker level inputs accommodates OEM integration • Balanced differential inputs • Switchable illumination (blue or red) • 1/2 DIN chassis • includes mounting brackets |
Images of AudioControl THE EPICENTER®, THE EPICENTER® PLUS, and THE EPICENTER® InDASH bass restoration processors.
PREAMP EQUALIZERS AND PROCESSORS
| Model | Features |
|---|---|
| DQDX™ 6-Channel Equalizer with Signal Delay, Crossover and Line Driver | Six channel digital signal processor with signal delay, front, rear and sub-woofer equalizer • Two-way 24 dB/octave Linkwitz-Riley alignment crossover • Discrete input and output level controls with clip indicators • Programmable Frequency Match (PFM) subsonic filter • Remote sub-woofer level control • Balanced differential inputs • Switchable ground isolation • Dash Mount ACR-3 Level Control Included |
| EQST™ 6-Channel Pre-Amp Equalizer with Speaker level Inputs | Six channel dual bandwidth equalizer • 6 bands • octave bass equalization plus 7 bands midrange / high frequency equalization • Programmable Frequency Match (PFM) subsonic filter • Line level and speaker level inputs • Input / output level matching • AutoMode inputs • 13 volt line driver • Balanced differential inputs • Switchable ground isolation |
| EQXT™ 2-Channel Pre-Amp Equalizer & Crossover with Speaker Level | Dual bandwidth equalization with crossover • 6 bands of 1/2 octave bass equalization • 7 band octave equalizer • 24dB/octave Linkwitz-Riley alignment crossover • High pass, low pass and full range outputs plus mono/invert sub output • Programmable Frequency Match (PFM) Filter • Switchable ground isolation • Line level and speaker level inputs • Input / output level matching • Balanced inputs • 13 volt line driver |
| EQLT™ 2-Channel Pre-Amp Equalizer with Speaker Level Inputs | Dual bandwidth equalization • 6 bands of 1/2 octave bass equalization • 7 band octave equalizer • Switchable ground isolation • Line level/ speaker level inputs • input/output level matching • Balanced inputs • Programmable Frequency Match (PFM) Filter • 13 volt line driver |
Images of AudioControl DQDX™, EQST™, EQXT™, and EQLT™ units.
ELECTRONIC CROSSOVERS
| Model | Features |
|---|---|
| 6XS™ CROSSOVER 6-Channel Electronic Crossover with Subwoofer Level Control | 2, 4 or 6 channel inputs • Automode inputs • front highpass, front bandpass, rear highpass, and sub-woofer outputs • 24 dB/octave Linkwitz-Riley alignment • remote mounted subwoofer level control • Programmable Frequency Match (PFM) subsonic filter • Output level controls • 13 volt peak preamp line driver • switchable ground isolation • Dash Mount ACR-1 Sub-woofer Level Control Included |
| 2XST™ CROSSOVER 2-Channel Electronic Crossover with PFM Subsonic Filter | State variable 18 dB/octave electronic crossover • 2-channel 2-way module programmable • balanced inputs • output level controls • 13 volt peak preamp line driver • switchable isolation • PWM power supply • Programmable Frequency Match (PFM) Filter for speaker control and amplifier protection |
Images of AudioControl 6XS™ and 2XST™ electronic crossovers.
IN-DASH AUDIO PROCESSORS
| Model | Features |
|---|---|
| THREE.2™ InDash Equalizer and Crossover with Auxiliary Input | 3+2 band stereo equalizer with ParaBASS • 13 volt peak line driver • two channel preamp input • independent front, rear and sub-woofer out • 2-way 24 dB/octave electronic crossover • Front and rear panel auxiliary inputs • Switchable illumination (blue or red) • Master volume control • Fader • Subwoofer level controls • 1/2 din chassis • Left/right input level controls • PWM switching power supply • Includes mounting brackets |
| FOUR.1i™ InDash Equalizer with Auxiliary Input | 4+1 band stereo equalizer with ParaBASS • Two channel preamp input • Independent front, rear outputs • Auxiliary input • 13 volt peak line driver • Switchable illumination (blue or red) • Balanced inputs and outputs • Master volume control • Fader • 1/2 din chassis • PWM switching power supply • Includes mounting brackets |
| THE EPICENTER® InDASH InDash Bass Restoration 160dB SPL Microphone & Display | InDash version of The Epicenter® Bass Restoration Processor • Built-in 160 dB capable microphone & display • Selectable display switching monitors vehicle electrical system • ParaBass equalization circuitry • Line level & active speaker level inputs accommodates OEM integration • Balanced differential inputs • Switchable illumination (blue or red) • 1/2 DIN chassis • Includes mounting brackets |
Images of AudioControl THREE.2™, FOUR.1i™, and THE EPICENTER® InDASH units.
ACCESSORIES
| Model | Features |
|---|---|
| ACR-1 Remote Level Control | ACR-1 Remote Level Control for: The Epicenter®, LC2i, LC6i, LC7i, Overdrive Plus, Matrix Plus, 6XS • Includes 20ft of Cable • New compact, durable design |
| ACR-2 Remote Level Control | ACR-2 Remote Level Control for: LCQ-1, The Epicenter® Plus • Includes 20ft of Cable • New compact, durable design |
| ACR-3 Remote Level Control | ACR-3 Remote Level Control for: LC8i, DQ-61, DQDX, The Epicenter® 1200 & 600, DM-810, DM-608 • Includes 20ft of Cable • New compact, durable design |
Details on 18dB/OCTAVE CROSSOVER MODULES and 24dB/OCTAVE CROSSOVER MODULES with available frequencies listed. Image of an AudioControl Vintage T-Shirt.
AUDIO MEASUREMENT TOOLS
| Model | Features |
|---|---|
| SA-4100i™ iOS Measurement Microphone | Compatible with iPod® touch, iPhone®, iPad® • factory calibrated • Omnidirectional capsule • 20 Hz to 20 kHz frequency response +/- 3 dB • Built-in Lightning connector • Dual-gain range preamp • Access to AudioControl Mobile Tools app (available on the app store) • AudioControl Mobile Tools app includes: RTA realtime analyzer • FFT fast Fourier transform • SPL sound pressure level • Polarity Testing • DQ-61 signal delay |
| SA-3052ATM RTA / SPL Meter | Special autosound real time analyzer for contests and car stereo tuning • one third octave professional real time spectrum analyzer and SPL meter • 6 non-volatile memories • four speeds • two-color power/charging LED • flip out front feet • soft carrying case • measurement microphone • IASCA, MECA, and USACI contest scoring • parallel printer interface • internal rechargeable battery included • Please specify software when ordering |
Images of the SA-4100i™ iOS Measurement Microphone and SA-3052ATM RTA / SPL Meter, showing graphical displays and readings.
ABOUT AUDIOCONTROL
Established in Seattle nearly four decades ago, AudioControl has been dedicated to designing, engineering, and building world-class audio products. The company has earned a worldwide reputation for operating at the highest levels of reliability and performance. A relentless enthusiasm for flawless sound performance drives their work, with a team of passionate engineers in the Pacific Northwest creating innovative products known for making good sound great.
Contact Information:
Remittance Address: AudioControl, 22410 70th Ave W, Mountlake Terrace, WA 98043
Contact Us: Tel. 425.775.8461 | Questions: sound.great@audiocontrol.com | Orders: orderdesk@audiocontrol.com
Copyright © 2016 AudioControl, Inc. All rights reserved. Features, specifications, appearance, and pricing are subject to change without notice. No part of this document may be reproduced, duplicated, or transmitted without the express approval of AudioControl. This document is confidential and intended only for the use of authorized AudioControl dealers, their personnel, and approved AudioControl Sales representatives.
Disclaimers regarding compatibility with Apple devices (iPod, iPhone, iPad) and trademarks are included.
