VIVO Power Strip/Surge Protector VESA Mount

Instruction Manual

SKU: MOUNT-PS02V

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product: https://vivo-us.com/products/mount-ps02v

✉️

help@vivo-us.com

www.vivo-us.com

Chat live with an agent!

309-278-5303

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. VIVO cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Package Contents

A (x1) Mounting Bracket
B (x1) Clamp
S-A (x2) M4x5mm Screws
M-A (x4) M4x14mm Screws
M-B (x4) M5x14mm Screws
M-C (x4) M6x14mm Screws
M-D (x4) M8x20mm Screws
M-E (x4) M5 Washer
M-F (x4) M8 Washer
M-G (x2) Small M8 Washer

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. Maximum capacity: 2.2lbs (1kg)

Tools Needed

? Phillips Screwdriver

Assembly Steps

STEP 1

Connect Clamp (B) to Mounting Bracket (A) using M4x5mm Screws (S-A) and a Phillips screwdriver. Mounting holes on Clamp (B) can be selected based on the desired spacing for the power strip. The clamp can be adjusted for spacing between a minimum of 15mm (0.59 inches) and a maximum of 117mm (4.6 inches).

[Diagram: Shows Clamp (B) being attached to Mounting Bracket (A) with two S-A screws.]

STEP 2 - MOUNTING OPTIONS

VESA Brackets - Left or Right Side:

Mount the assembly under the left or right TV mount's VESA bracket using appropriate Screws (M-A, M-B) and Washers (M-E or M-F), along with a Phillips screwdriver. For securing the second VESA bracket, use M-A or M-B screws with M-E or M-F washers, plus the M-G small washer.

[Diagram: Illustrates attaching the bracket assembly to VESA mounts. Shows combinations of M-A/M-B screws with M-E/M-F washers, and M-A/M-B screws with M-E/M-F/M-G washers for different VESA configurations.]

VESA Brackets - Top:

Mount the assembly under the top of the TV mount's VESA bracket using appropriate Screws (M-A, M-B) and Washers (M-E or M-F), along with a Phillips screwdriver for the top portion. Secure the bottom of the VESA brackets using M-A or M-B screws with M-E or M-F washers, plus the M-G small washer.

[Diagram: Illustrates attaching the bracket assembly to the top VESA mount. Shows combinations of M-A/M-B screws with M-E/M-F washers, and M-A/M-B screws with M-E/M-F/M-G washers.]

Freestanding TV Mount:

Mount the assembly directly to the VESA holes on the back of the TV using appropriate Screws (M-A, M-C, M-D) and Washers (M-E or M-F), along with a Phillips screwdriver.

[Diagram: Illustrates attaching the bracket assembly directly to a TV's VESA holes. Shows combinations of M-A/M-C/M-D screws with M-E/M-F washers.]

STEP 3

Place the power strip into the assembled mount and tighten the hand bolt on Clamp (B).

[Diagram: Shows the power strip being inserted into the clamp and the hand bolt being tightened.]

Support and Contact Information

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

Document Last Updated: 01/16/2023 REV1

VIVO support is available Monday - Friday from 7:00 am - 7:00 pm CST. Our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact VIVO. We are happy to replace parts to ensure you have a fully functioning product.