VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Instruction Manual for V I V O models including: STAND-V032 Dual Monitor Desk Mount, STAND-V032, Dual Monitor Desk Mount, Monitor Desk Mount, Desk Mount
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Web Dec 20, 2022 · cdn.shopify.com
assembly | The Northern Ireland Assembly cdn.shopify.com
File Info : application/pdf, 8 Pages, 5.62MB
DocumentDocumentDual Monitor Desk Mount Instruction Manual SKU: STAND-V032 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v032 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com Chat live with an agent! 309-278-5303 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. TIPOVER WARNING SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER: · NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND. · USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER. WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. PACKAGE CONTENTS A (x1) Pole B (x1) Clamp C (x1) Swivel Arm D (x2) VESA Plate E (x1) Grommet Base Plate I (x1) Pole Cable Clip F (x1) Soft Pad J(x4) Arm Cable Clip G (x1) Support Plate H (x1) Pole Cap S-A (x3) M6x16mm Screw M-C (x8) M6 Spacer 2 S-B (x2) M6 Security Nut M-A (x8) M4x12mm Thumbscrew M-B (x8) M4x30mm Screw T-A (x1) 3mm Allen Wrench T-B (x1) 5mm Allen Wrench T-C (x1) 6mm Allen Wrench NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED TOOLS NEEDED Phillips Screwdriver ASSEMBLY STEPS STEP 1 Loosen knob on Clamp (B). DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. 22 lbs Per Arm (10kg) B STEP 2A: DESK CLAMP Mount Clamp (B) to Pole (A) using M6x16mm Screws (S-A) 3mm Allen Wrench (T-A). Secure assembly to desktop by tightening knob on Clamp (B). B T-A S-A A 3 STEP 2B: GROMMET MOUNT Grommet Installation Using a phillips screwdriver, remove the screw from Clamp (B) and disassemble. Set Knob (B2) aside. Mount Grommet Plate (E) to Pole (A) using M6x16mm Screws (S-A) and 3mm Allen Wrench (T-A). Remove adhesive backing from Soft Pad (F) and adhere to Grommet Plate (E). Using a 3/8" (10mm) drill bit, drill through desktop surface and secure assembly using Knob (B2) and Support Plate (G). B T-A S-A E A B2 F G B2 4 STEP 3 Slide Pole Cable Clip (I) and Swivel Arm (C) onto Pole (A). Secure Swivel Arm (C) in place using 6mm Allen Wrench (T-C). Attach Pole Cap (H) to Pole (A). Attach Arm Cable Clips (J) to Swivel Arm (C). H C I A T-C J STEP 4 Secure VESA Plates (D) to monitors using M4x12mm Thumbscrews (M-A) or M4x30mm Screws (M-B). M6 Spacers (M-C) may be required. M-A D M-B D M-C 5 STEP 5 Slide monitors with VESA Plates (D) onto Swivel Arm (C). Secure VESA Plates (D) in place using M6 Security Nuts (S-B). D C S-B STEP 6 Manage cables using Arm Cable Clips (J) and Pole Cable Clip (I). J I 6 STEP 6 Adjust the monitor tilt using 5mm Allen Wrench (T-B). To level monitors, remove M6 Security Nuts (S-B) and tighten or loosen adjustment screws using 3mm Allen Wrench (T-A). Once level, fasten M6 Security Nuts (S-B) back into place. T-B S-B T-A 7 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 08/19/2022 REV1 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr