01 PRODUCT DESCRIPTION
PETKIT EVERSWEET SOLO SE Fountain Disassembly Diagram
- Drinking Tray: The top part where the pet drinks water.
- Filter: Element for water purification.
- Filter Tray: Holder for the filter.
- Output Pipe: The pipe through which water is dispensed.
- Wireless Pump: The pump that ensures water circulation.
- Main Body of the Fountain: The primary housing of the fountain.
- Charging Base of the Fountain: The base for charging and powering the fountain.
- Light Indicator: Indicator for the device's status.
- USB Cable: Cable for connecting to a power source.
02 DEVICE CARE
Scan the QR code to watch the video instructions for assembling and cleaning the device.
03 LIGHT INDICATORS
Description of Light Indicators on the Charging Base
- Operating Mode (No light): Continuous water flow. After connecting the device to the power source, the green indicator light will flash 3 times, and water supply will start by default.
- Water Level Indicator (Flashing blue light): Indicates low water level. The device is in standby mode. The device will continue to operate normally after refilling with water.
- Device Power Failure (Alternating flashing blue and green light): Indicates a power failure. Connect the USB cable to restart the device or contact support.
04 TECHNICAL SPECIFICATIONS
Parameter | Value |
---|---|
Name | Eversweet SOLO SE (Wireless Pump) Smart Pet Drinking Fountain |
Model | P4103S |
Dimensions | 160×160×154 mm |
Purpose | For small cats and dogs |
Materials | ABS plastic, silica gel |
Total device weight | ~0.75 kg (without adapter) |
Rated voltage | 5 V ⎓ 1 A |
Rated power | 2 W |
Device capacity (volume) | 1.8 L |
05 MESSAGE TO CUSTOMERS
- Thank you for purchasing the PETKIT Eversweet Solo SE drinking fountain.
- PETKIT aims to improve the lives of both pets and their owners through innovative technologies.
- Before use, carefully read these instructions. Installation and use of the device implies that the buyer has carefully read and agreed to the safety rules of this manual.
- PETKIT bears no legal responsibility to the buyer or any other legal entity for any damages resulting from improper operation of the device.
- Please note that all images in this manual are for illustrative purposes only and may differ slightly from the actual product.
- PETKIT reserves the right to make changes to this manual.
06 SAFETY PRECAUTIONS
Failure to comply with the safety requirements described in this manual may lead to device malfunction or injury.
- During setup and use of the device, strictly adhere to the provisions of this manual.
- The device is not recommended for use with animals younger than 3 months.
- The device is intended for indoor use only.
- Do not leave the device under direct sunlight or near open flames.
- Although the device operates on a small amount of electrical energy, a pet may still get injured if it tries to chew through the wire. Please ensure your pet does not chew on the wire.
- The device must be installed only on a flat, horizontal surface.
- Do not overturn the device to avoid improper operation or water leakage.
- It is forbidden to immerse the device and the power adapter in water.
- If the device is not used for a long time, disconnect it from the power source.
- Children are forbidden to use the device without adult supervision.
- Do not attempt to repair the device yourself to avoid damage or accidents. For repairs, contact a specialist.
- In case of problems with the device, contact customer support.
Information on the Disposal and Recycling of Electrical and Electronic Equipment Waste
This marking indicates that this product should not be treated as household waste. To protect the environment and human health from harm due to uncontrolled waste disposal, dispose of the device properly for possible further reuse of natural resources.
WARRANTY CARD No.
We sincerely congratulate you on your purchase and are confident that the acquired equipment will meet all your expectations.
Before using this equipment, we recommend that you familiarize yourself with the operating instructions.
SECTION 1: WARRANTY OBLIGATIONS
This warranty card confirms the quality of the product and grants the right to warranty repair and replacement of defective components. All warranty conditions are valid within the framework of consumer protection legislation and are regulated by Ukrainian law. Technical maintenance of the equipment is not included in the list of works performed under warranty obligations. The company reserves the right to refuse warranty repair in case of non-compliance with the conditions stated below.
SECTION 2: WARRANTY CONDITIONS
- The warranty is valid provided that the warranty card is correctly filled out, indicating the full model name, product serial number, date of sale, warranty period, clear seals of the selling company, and complete information about the installer company, including the full name of the specialist responsible for installation work, a completed commissioning protocol, and an act of readiness of the equipment for commissioning.
- The warranty does not apply if the factory marking or serial number is damaged, illegible, has traces of re-gluing, or is missing on the equipment.
- The warranty does not apply in case of violation of equipment transportation and storage rules.
- The warranty does not apply if the equipment is used for purposes other than intended.
- The warranty does not apply in case of changes to the equipment's design or modifications, as well as the use of parts, components, software, consumables, cleaning materials not provided for by regulatory documents.
- The warranty does not apply in case of equipment damage caused by the consumer or a third party.
- The warranty does not apply if the equipment malfunction is caused by force majeure (fire, lightning strike, flooding, natural disasters, etc.).
- The warranty does not apply if equipment damage is caused by non-compliance with State Standards for power parameters, telecommunication, cable networks, unregulated voltage fluctuations, and other malfunctions of power lines, leading to characteristic damage to power circuits, components, contacts, and compressors.
- The warranty does not apply if the equipment is operated in violation of the terms of use specified in the operating instructions.
- The warranty does not apply if there are signs of third-party interference or an attempt at unauthorized repair of the equipment.
- The warranty does not apply in case of equipment damage caused by foreign objects, chemicals, liquids, dust, insects, etc., entering the product.
ATTENTION! The warranty is valid provided that service is performed at «CITRUS» service centers.
Addresses of «CITRUS» service centers are listed at: https://service.ctrs.com.ua/
WARRANTY SERVICE MARKS
No. | Date | Organization, Address | Representative | Signature, Seal |
---|---|---|---|---|
1. | ||||
2. | ||||
3. |
Manufacturer and Importer Information
Brand: "Petkit Network Technology (Shanghai) Co., Ltd", PRC. WWW.PETKIT.COM.
Manufacturer: «Dongguan Zhihang Electronic Technology Co., Ltd.», office 701, building 15, Pushi Road 1, Qiaotou Town, Dongguan, Guangdong, PRC
Importer: indicated on the packaging.