NAVEE Electric Scooter

1. Assembly

Step 1: Prepare the Scooter

Place the scooter on a stable, flat surface. Deploy the kickstand. Hold the stem and raise it until it is completely upright. Push the quick-release lever inward to secure it.

Diagram Description: Shows the stem being folded up and secured with a quick-release lever. A 90-degree angle is indicated between the stem and the base.

Step 2: Secure the Handlebar

Press the safety lock and pull out the quick-release lever. Turn the handlebar 90 degrees counterclockwise. Push the quick-release lever inward to secure the handlebar.

Diagram Description: Shows a hand pressing a safety lock and pulling a quick-release lever. The handlebar is shown turned 90 degrees.

2. Charging

The scooter is fully charged when the LED on the battery charger changes from red to green.

WARNINGS:

• Do not charge non-rechargeable batteries.
• Charge the scooter indoors and never expose it to rain.
• If the scooter is turned off for about a month with the battery level below 30%, it will enter sleep mode. To exit sleep mode, charge the scooter for approximately three seconds to activate the battery.

Diagram Description: Shows a scooter connected to a charger. A battery icon indicates a charge level below 30%, and then approximately 30% with a charging indicator.

3. Download and Connect the NAVEE App

Scan the QR code to download and install the NAVEE App. Register and log in.

Diagram Description: Shows QR codes for Google Play and the App Store.

App Activation:

Turn on the scooter. A blinking Bluetooth icon indicates it is ready to connect. For your safety, the scooter is limited to 10 km/h and will beep continuously before activation. To unlock full functions, activate the scooter via the NAVEE App. Once activated, the beeping will stop, and speed limits will be lifted.

Diagram Description: Shows a scooter with a blinking Bluetooth icon and a smartphone displaying the NAVEE app with a "Link my device" option.

4. Using Apple Find My

Pairing:

With the scooter powered on, squeeze the brake lever and simultaneously press the accelerator 3 times briefly. The scooter will enter Find My pairing mode (indicated by a beep).

On your iPhone or iPad, open the Find My app. Tap "+" and select "Add Other Item". When "NAVEE Electric Scooter" appears, tap "Connect". Follow the on-screen instructions. A beep will confirm successful pairing.

Notes for Find My:

• Exit the NAVEE App before using the Find My function.
• If Bluetooth Proximity Unlock is enabled, turn it off in the NAVEE App and unpair the scooter from Bluetooth in your phone's settings if already connected.

Diagram Description: Shows a hand squeezing a brake lever and pressing an accelerator button three times.

Unpairing:

With the scooter powered on (and not charging or locked), squeeze the brake lever and simultaneously press the accelerator 5 times briefly. The display will turn off, indicating that Find My has been unpaired. To pair again, delete the scooter from the Find My app and repeat the pairing process.

Diagram Description: Shows a hand squeezing a brake lever and pressing an accelerator button five times.

Finding the Serial Number:

For iOS users who have paired the scooter using the Find My app, with the scooter paired, fully press the accelerator and squeeze the brake lever 3 times to display the serial number in the Find My app.

Diagram Description: Shows a scooter with a person pressing the accelerator and brake lever.

Legal Notice:

Use of the "Works with Apple" badge means the product is designed to work with the identified technology and has been certified by the manufacturer to meet Apple Find My network specifications. Apple is not responsible for the device's operation, use, or compliance with safety standards.

Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

5. Operation: Starting, Accelerating, Decelerating, and Braking

Safety First: Always wear a helmet, hand/wrist pads, knee pads, elbow pads, and other protective gear to minimize the risk of injury.

Starting and Accelerating:

Place one foot on the deck and use the other foot to push off slowly. Once the scooter is gliding, place both feet on the deck and gently press the accelerator.

Note: This electric scooter is powered by an electric motor. For your riding safety, the motor will not start until the speed reaches 5 km/h.

Diagram Description: Shows a person pushing off with one foot, then placing both feet on the deck. An arrow indicates the speed reaching 5 km/h.

Decelerating and Braking:

Release the accelerator to slow down. Press the brake lever to brake.

6. Parking

When stopping, place one foot on the ground and get off the scooter. Use the kickstand to park.

PARKING WARNING:

• Do not park your scooter on a slope.
• Ensure the kickstand is positioned on a flat surface and the scooter is stable before leaving it.

Diagram Description: Shows a scooter with its kickstand deployed on a flat surface.

Accessing Electronic Manuals

Scan the QR code to access electronic user manuals.

Diagram Description: Shows QR codes for accessing electronic user manuals.

Company Information:

Manufactured by: SPACEWALKER PTE. LTD.

For more information and after-sales support, contact service@navee.tech or visit www.naveetech.com.

Brightway Technology (Netherlands) B.V. is the EU representative.