Hampton Bay 9-FT Aluminum Umbrella

Safety Information

Product Caution

This umbrella is designed for outdoor use and is not a toy. It should be used in normal outdoor conditions. For formidable or severe weather, it is recommended to store or cover the umbrella. Do not place near open flames. Do not use as a support. Avoid shaking, leaning on, or climbing the product. Children under 10 should be supervised by an adult when near the product. This product is not intended for commercial use, as it will void the warranty.

Safety Warnings

• [Warning] Please keep children out of the assembly area before assembly.
• [Warning] This umbrella unit is heavy and may require two adults for safe assembly.
• [Caution] Never use the umbrella in high wind conditions, as damage may occur.
• [Caution] Keep all flame and heat sources away from this product at all times.

Warranty

2 Year Frame and 2 Year Fabric Limited Warranty

What is Covered

Hampton Bay warrants the frames against manufacturing defects to the original purchaser for two years. A two-year limited warranty is also provided for the fabric.

What is Not Covered

The customer is responsible for freight and packaging charges to and from the service center. The warranty does not cover commercial use, hardware, acts of nature, fire, freezing, or abusive use. Purchased parts are not covered. Hampton Bay reserves the right to substitute similar merchandise if the model is no longer in production.

For assistance, contact Customer Service at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

Pre-Assembly

Planning Assembly

Read all instructions before assembly. To avoid damaging the product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

[Note] More than one person may be required to complete the assembly of this product.

Package Contents

Assembly

1. Attaching the Umbrella Shade to the Umbrella Pole

Place the umbrella shade (A) over the umbrella pole (B). Press the tab on the umbrella pole (B) while sliding the umbrella pole (B) into the umbrella shade (A) until the two pieces snap into place.

[Diagram Description: An illustration shows part A (umbrella shade) being fitted over part B (umbrella pole). A close-up view highlights a tab on the pole that needs to be pressed to allow insertion into the shade.]

Operation

1. Opening the Umbrella

Shake the umbrella fabric before opening. Slowly turn the crank clockwise to open the umbrella.

[Diagram Description: An illustration shows a person operating the crank mechanism to open the umbrella. Arrows indicate the clockwise rotation of the crank. Close-up views show the crank mechanism.]

2. Tilting the Umbrella

To tilt the umbrella, turn the crank clockwise and counterclockwise.

[Diagram Description: Illustrations show the umbrella in various tilted positions, indicating that the crank can be turned both clockwise and counterclockwise to adjust the tilt angle. Close-up views show the crank mechanism.]

3. Closing the Umbrella

Slowly turn the crank in a counterclockwise direction to close the umbrella.

[Diagram Description: An illustration shows a person operating the crank mechanism to close the umbrella. Arrows indicate the counterclockwise rotation of the crank. Close-up views show the crank mechanism.]

Care and Cleaning

• For best results, clean the pole with a damp cloth and dry thoroughly. This helps prevent mildew by removing accumulated dirt particles.
• Do not clean with abrasive materials, bleach, or solvents.
• Clean the umbrella fabric with a mild soap and water mixture. Rinse thoroughly with clean water and allow the fabric to air dry completely.
• Always keep the umbrella closed when not in use.
• Keep the umbrella away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.