Monster Storm XKH03 Headphones

Product Overview

• Headphones
• Audio Cable
• Charging Cable
• Manual

Product Components

1. Volume Up, Next Song
2. Multi Function Button (MFB) (Power on/off/Answer/Hang Up/Play/Pause /Last Number Redial)
3. Volume Down, Last Song
4. 3.5mm Audio Port
5. Bluetooth Indicator
6. Type-C Charging Port
7. Microphone

Product Function Parameters

• Bluetooth version: V5.3
• Battery capacity: 600mAh
• Charging time: about 1.5 hours
• Standby time: about 100 hours
• Transmission distance: 10 meters
• Horn impedance: 32 Ω ±15%
• Frequency range: 20hz- -20khz
• Speaker size: 40mm
• Speaker sensitivity: 110dB ± 3dB
• Microphone sensitivity: -42dB ± 3dB
• Rated input: 5V 500mA
• Audio interface: AUX
• Running time: About 25 hours

Power On/Off

Press MFB button to turn on the headphones; the ice blue indicator flashes and voice prompt “Power On” will be heard.

Press MFB button again to turn off headphones; the red indicator flashes and voice prompt “Power Off” will be heard.

Pairing

Press MFB button, turn on the Bluetooth of the smart device and search for Monster Storm XKH03 headset to pair. Click connect; when the pairing is successful, you will hear “Connected.”.

Note: The headset will automatically enter pairing mode the first time it is used and powered on. This product has a Bluetooth memory function; you only need to turn on the headset and the device to use it again, and it will automatically connect.

Volume Control

Short press the Volume Up or Down Button to turn volume up or down; you hear a tone once you reach the maximum volume or minimum volume.

Call

• Answer/End Call: short press the MFB
• Reject Call: long press the MFB about 2 seconds
• Redial: quickly double press the MFB for redial the last dialed phone number

Music

• Play/Pause: press the MFB.
• Backward: press [volume down] for 2 seconds for the previous song.
• Forward: press [volume up] for 2 seconds for the next song.

Mode Switch

Game/Music mode: Long press MFB button 2 seconds

Voice Control Function (Call SIRI)

Triple-click the MFB button (depends on mobile phone feature)

Reset Paired Device List

After power on, no Bluetooth device is connected, press and hold the Volume Up and Volume Down Button simultaneously for about 8 seconds.

Audio Cable Operation

The audio cable connects the device and the Bluetooth headset, and the headset automatically shuts down.

Unplug the audio cable; you need to reboot, and then follow the above steps to pair and connect.

LED Guide to Indicator Lights

Listen Responsibly

To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.

Noise levels are measured in decibels (dB); exposure to any noise at or above 85 dB can cause gradual hearing loss.

Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it. The softer it is, the more time you can listen to it.

Get the most out of your equipment and enjoy great audio performance even at safe levels. Monster headphones will allow you to hear more details at lower volume levels than ever before.

Learn how to establish a safe listening level and review other important safety guidelines from the Consumer Electronics Association at www.ce.org. Important information on how to prevent Noise-Induced Hearing Loss (NIHL) and a comprehensive list of which noises can cause damage can be found on the Deafness Research Foundation's website, www.drf.org.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID:2A8PV-QSMXKH03