Monster 190693 Bluetooth Headphones
Brand: Monster
Model: 190693
Pairing Your Headphones
Follow these steps to connect your Monster Bluetooth Headphones to a device:
- Ensure your phone or music player is switched on.
- To pair for the first time: Switch on the headphones. They will automatically enter pairing mode, indicated by a rapidly flashing blue and red indicator light.
- To re-pair with a different device: Ensure the headphones are switched off. Press and hold the multifunction button for approximately five seconds until the blue and red indicator lights flash quickly.
- On your phone or music player, activate Bluetooth and search for devices.
- Select your Monster device from the list of found devices.
Headphone Controls
The headphones feature several controls for managing playback and calls:
Physical Layout:
- Volume Down: Decreases volume.
- Track Back: Skips to the previous track.
- Microphone: For calls and voice commands.
- Multifunction Button: Used for power, pairing, play/pause, and call management.
- Volume Up: Increases volume.
- Track Forward: Skips to the next track.
- 3.5 mm Audio Input: Allows for wired connection.
Control Functions:
| Function | Action |
|---|---|
| Power On | Press the Multifunction Button for about 2 seconds. |
| Power Off | Press the Multifunction Button for around 4 seconds. |
| Answer Call | Short press the Multifunction Button. |
| Cancel/End Call* | Short press the Multifunction Button. |
| Reject Call* | Press and hold the Multifunction Button for about 2 seconds. |
| Voice Dial | Double press the Multifunction Button. |
| Redial | Press and hold Volume Up and Volume Down buttons simultaneously for about 2 seconds. |
| Mic Mute Toggle* | Long press Volume Down button for Mute. Short press Volume Up or Down to unmute. |
*Function during call.
Guide to Indicator Lights
The indicator lights provide status information:
| Indicator Light | Description |
|---|---|
| Flashing Blue Light | Connected |
| Solid Red Light | Charging |
| Blue and Red lights flash alternately | Pairing mode |
| Red Flash | Low Battery |
Power Options
Wired Mode: You can use your On-Ear headphones as wired headphones to save battery or if your batteries are not charged. Connect a 3.5mm audio cable (not included) to the 3.5mm audio input port.
Connection Management
- Disconnect the Headphone: To disconnect from your device, switch off the headphones or disconnect them in the Bluetooth menu of your device.
- Reconnect the Headphone: To connect to the last used phone or music player, switch on the headphones or make the connection in your device's Bluetooth menu.
Compliance Information
Declaration of Conformity: Monster LLC declares that the Model 190693, Monster Bluetooth Headphones, complies with the essential requirements of Radio Equipment Directive 2014/53/EU and other relevant standards (EN 300 328, EN 55032, EN 55020, ETSI EN 301 489, EN 62479). The product also meets the requirements of Directive 2011/65/EU (RoHS) and does not contain REACH Substances of Very High Concern.
FCC Statement: This equipment complies with Part 15 of the FCC Rules for a Class B digital device, designed to provide reasonable protection against harmful interference. Operation is subject to two conditions: it may not cause harmful interference, and it must accept any interference received.
Industry Canada (IC) Compliance: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: no harmful interference, and acceptance of any interference received.
Disposal: The crossed-out wheelie bin symbol ?️ indicates that this product must be disposed of separately from household waste in the European Union.
For full manual and support, visit: http://www.monsterproducts.com/support/product-manuals
