Xiaomi Smart Standing Fan 2 Pro User Manual

Safety Instructions

WARNINGS Improper use may lead to electric shocks, fire, personal injury, or other damage.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Ensure that the fan is switched off from the supply mains before removing the guard. This appliance contains non-replaceable batteries. WARNING: For the purposes of recharging the battery, only use the detachable supply unit <BLJ24W120200P-V> provided with this appliance.

Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.

This appliance contains a built-in li-ion battery. Do not disassemble, impact, crush the battery or throw it into fire. If there is severe swelling, do not continue to use. Do not leave the battery in high temperature environment.

Do not use this fan if the power cord of the charging base is damaged or its power plug is loose. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.

Do not use this fan in a place where it will easily fall over or where there are other unstable objects nearby.

Do not excessively pinch, bend, or twist the power cord of the charging base as this may expose or break its core.

Do not insert your fingers or any object into the front grille, rear grille, or the fan blades when the fan is in use. Keep hair and fabrics away from the fan to avoid getting them caught in the fan.

Do not use any improper power outlet. Do not use the charging base provided with this fan for any other device. Do not improperly dispose of old batteries. Used batteries should be discarded at a professional recycling facility.

Do not charge the fan on uneven places or plush materials. Otherwise, it is easy to cause circuit failure or fire due to poor contact between the charging base and the charging port. Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.

PRECAUTIONS

Installation

To avoid electric shocks, fire, personal injury, or other damage, make sure the fan base is installed last. Please follow the installation instructions in the user manual. Do not turn on the fan or connect it to the charging base if it is not completely assembled. Turn off or unplug the fan before installing or disassembling it. Do not touch the on/off button to prevent the fan from running and causing danger.

Transportation

Firmly hold the fan stand to avoid it from falling down and causing personal injury.

Using the Fan

Immediately stop using the fan if it makes unusual sounds, gives off bad odors, overheats, or rotates irregularly. Do not lean on or tilt the fan while it is running. Do not shake the fan's head repeatedly so as to avoid damage to the internal mechanism.

Charging the Fan

When the battery is depleted, the fan should be charged as soon as possible. To prevent the battery from being damaged, connect the charging base to the fan base in a timely manner. Do not unplug the charging base by directly pulling at the cord or wiggling it out of the outlet. Instead, pull the plug out itself. Do not attempt to repair the charging base by yourself if it is damaged. When the charging base is damaged or broken, it must be replaced with a genuine one purchased from the manufacturer or after-sales service department.

When the fan is charging, the fan base may get warm. It is recommended to charge the fan on insulating materials or in places that are not easily affected by heat sources, so as to prevent the places where the fan is put from becoming discolored or deformed.

Care & Maintenance

Make sure the fan is unplugged before removing the protective cover. When maintaining and cleaning the fan, make sure to remove the fan base first before removing other parts and to install the fan base last when installing.

Package Contents

Read this manual carefully before use, and retain it for future reference.

• Lower Stand
• Fan Base (with Built-in Li-ion Battery)
• Fan Blade Assembly Knob
• Rear Grille Knob
• Motor & Upper Stand
• Fan Assembly
• Hex Key
• Fan Grille Screw
• Charging Base
• User Manual

Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Product Overview

Top View

• Charging Base Alignment Mark
• Natural Breeze Indicator
• Wi-Fi Indicator
• Speed/Scheduled Turn-off Indicator
• On/Off Button
• Speed Adjustment/Mode Switch Button
• Oscillation Button
• Scheduled Turn-off Button

Bottom View

• Fan Assembly
• Battery Level Indicator
• Motor & Upper Stand
• Lower Stand
• Fan Base
• Pad
• Fan Base Bottom Cover
• Charging Port
• Charging Base
• Release Button
• Release Button
• Charging Port

Installation

Step 1: Open the fan assembly

Turn the 11 front grille counterclockwise until it separates from the 13 rear grille. Remove the front and rear grille, then take out the 12 fan blade assembly.

Step 2: Install the rear grille

Install the 13 rear grille onto the motor with " " facing upwards, and then install and turn the 6 rear grille knob clockwise to firmly fix the rear grille to the shaft of the motor.

Step 3: Install the fan blade assembly

Align the center hole of the 12 fan blade assembly with the motor's shaft to install it into position, then install the 5 fan blade assembly knob onto the motor's shaft. Turn the knob counterclockwise to fix the fan blade assembly to the motor's shaft.

Step 4: Install the front grille

Align the front grille alignment mark with the rear grille left alignment mark, and make sure the 11 front grille is properly embedded into the 13 rear grille. Turn the front grille clockwise until the front grille alignment mark aligns the rear grille right alignment mark. Make sure the grilles are securely fastened.

Step 5: Fasten the front grille

Insert the 8 fan grille screw into the hole at the bottom of the fan grille. Turn the screw clockwise with the included 7 hex key to tighten it.

Step 6: Install the fan base

• Standing fan mode: Connect motor & upper stand to the 3 lower stand, and then connect lower stand to the 4 fan base, as illustrated. Once you hear a click, the parts have been installed successfully.
• Table fan mode: Connect motor & upper stand to the 4 fan base. Once you hear a click, the parts have been installed successfully. Note: Press the release button to remove the lower stand.

How to Use

Charging

It is recommended to fully charge the fan before use. Connect the charging base to the charging port on the bottom of the fan base, and then plug in the charging base. When the battery level indicator is blinking, the fan is successfully connected to the power. You can use this fan by either connecting to a power outlet or not. The fan is equipped with a built-in Wi-Fi module, and energy consumption occurs even when it is turned off. By fully charging the fan and then turning it off, the battery can last for approximately 2 days. To maintain optimal battery performance, it is recommended to keep charging the fan if it is not in use.

Note: Always charge and use the fan on a flat, stable place.

• Connecting to the power outlet
  • Fan Status: On/Off
  • Battery Level: 30%, 30%-100%, 100%
  • Battery Level Indicator Status: Blinking orange, Blinking white, Off
• Not connecting to the power outlet
  • Fan Status: On, Off
  • Battery Level: 30%-100%, 1%-30%, 0%, 0%-100%
  • Battery Level Indicator Status: White, Orange, Off (The fan will automatically turn off), Off

Turning On/Off

• Turning On: Press the button to start the fan. When turned on for the first time, the default speed is slow (1) and the mode is direct breeze.
• Turning Off: Press the button to stop the fan while it is running.

Switching Speed/Mode

Switching Speed

Press the button to adjust the speed, and the corresponding indicators will light up (see table below). After the fan is turned off and turned back on again, the speed will be the last used one.

• Speed: Slow (1), Medium (2), Fast (3), Turbo (4)
• Indicator: [Indicator On], [Indicator Off]

Switching Mode

Press and hold the button to switch between direct breeze and natural breeze. The indicator is off while in direct breeze mode and is on while in natural breeze mode. After the fan is turned off and turned back on again, the mode will be the last used one.

Enable/Disable Oscillation

Press the button to enable or disable oscillation. You can set the oscillation angle range in the app. After the fan is turned off and turned back on again, the oscillation setting will be the last used one.

Note: When the Wi-Fi connection is reset, the oscillation angle range will change to the default angle of 90°. Unplug then plug the fan in or reset the Wi-Fi connection then turn on the fan, the fan will automatically oscillate its angle if enabling the oscillation function. The oscillation time varies depending on different angles, please wait with patience.

Scheduled Turn-off

Press the button to cycle through the scheduled turn-off times: 1 hour, 2 hours, 3 hours, 4 hours, and disabled, and the corresponding indicator(s) will light up (see table below). Five seconds after using the scheduled turn-off function, the indicator(s) resume to indicate the corresponding status of the current speed.

• Scheduled: Disabled, 1 hour, 2 hours, 3 hours, 4 hours
• Indicator: [Indicator On], [Indicator Off]

Note: For more scheduled turn-off options (up to 8 hours), please go to the Mi Home/Xiaomi Home app.

Adjust the Airflow Direction

Gently lift or push down the fan's head or fan grille to adjust the airflow upwards or downwards.

• 23° upwards
• 16° downwards

Connecting with Mi Home/Xiaomi Home App

This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.

* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

Note: The version of the app might have been updated, please follow the instructions based on the current app version.

Connecting to Wi-Fi

Simultaneously press and hold the buttons and . Once you hear a long beep, the fan is awaiting a connection, then you can pair it with a device via the app.

Wi-Fi Status & Indicator Description

• Wi-Fi Status: Awaiting Connection, Connecting, Connected, Fail to Connect
• Indicator: Blinking orange, Blinking blue, Blue, Orange

Resetting Wi-Fi Connection

Simultaneously press and hold the buttons and . Once you hear a long beep, the Wi-Fi connection has been reset successfully and then the fan is awaiting a connection. The Wi-Fi connection needs to be reset on the circumstances listed below:

• The Xiaomi account that the fan is paired with has been changed.
• The router that the fan is connected to has been changed.
• The account or password of the router that the fan is connected to has been changed.
• The Mi Home/Xiaomi Home app is unable to control the fan.

Enabling/Disabling Wi-Fi

Simultaneously press and hold the buttons and for seven seconds until you hear a notification sound, and then the Wi-Fi is enabled or disabled.

Child Lock Function

To disable the function of child lock, go to the page of Mi Smart Standing Fan 2 Pro in the Mi Home/Xiaomi Home app, or simultaneously press and hold the buttons and until you hear a long beep.

Note: Resetting the Wi-Fi connection or unplugging and plugging in the fan again can also disable this function.

Care & Maintenance

Washable Parts

The parts listed below can be cleaned with a soft cloth or sponge using water or neutral detergent.

• Front Grille
• Fan Blade Assembly
• Rear Grille
• Rear Grille Knob

Note: Stop and unplug the fan, then disassemble it and clean its parts. After cleaning, make sure all parts are completely dry before installing them and using the fan again. Avoid direct sunlight.

Not Washable Parts

The parts listed below can be wiped clean with a soft, dry cloth.

• Fan Blade Assembly Knob
• Fan Base
• Charging Base
• Lower Stand
• Motor & Upper Stand

Notes: Do not rinse the parts listed above with water. Do not use thinner, gasoline, detergent or alkaline detergent to clean any parts.

Specifications

• Name: Smart Standing Fan 2 Pro
• Model: BPLDS03DM
• Type: Standing Fan
• Net Weight: Approx. 3.2 kg
• Item Dimensions: 343 × 330 × 1000 mm
• Charging Input: 12 V 2 A
• Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
• RF Specification: Operation Frequency: 2.4 G Wi-Fi (2412–2472 MHz), Maximum Output Power: <20 dBm
• Rated Voltage: 12 V
• Rated Power: 24 W
• Noise Emission: 58 dB(A)
• Battery Type: Rechargeable Li-ion Battery
• Battery Capacity: 2800 mAh (33.6 Wh)
• Limited Charging Voltage: 0.8 V
• Product Information Requirements: Maximum Fan Flow Rate (F): 20.28 m³/min, Fan Power Input (P): 12.7 W, Service Value (SV): 1.60 (m³/min)/W, Maximum Air Velocity (c): 3.47 meters/sec, Measurement Standard for Service Value: EN IEC 60879:2019
• Standby Power Consumption (PSB): Without Wi-Fi connection: 0.216 W, With Wi-Fi connection: 0.391 W
• Fan Sound Power Level (LWA): 56.3 dB(A)
• Contact Details: Zhejiang Xingyue Electric Equipment Co., Ltd. South Side, 24th Floor, Jinpin Building, Headquarters Center, Yongkang City, Zhejiang Province, China

Power Adapter

• Manufacturer: Zhongshan Baolin Electronic Co., Ltd.
• Model Identifier: BLJ24W120200P-V
• Input Voltage: 100–240 V~
• Input AC Frequency: 50/60 Hz
• Output Voltage: 12.0 V
• Output Current: 2.0 A
• Output Power: 24.0 W
• Average Active Efficiency: 89.09 %
• Efficiency at Low Load(10%): 83.11 %
• No-load Power Consumption: 0.070 W

Troubleshooting

• Fault: The fan doesn't work.
• Possible Cause: The stand does not properly connect to the fan base. Child lock is enabled. The battery is depleted.
• Solution: Install the fan base with the stand correctly. Disable the child lock function. Charge the fan with the charging base.
• Fault: The fan is unable to connect to Wi-Fi.
• Possible Cause: The Wi-Fi connection is 5 GHz. The fan has been offline for more than half an hour.
• Solution: Connect to a 2.4 GHz Wi-Fi network. Reset the Wi-Fi connection.
• Fault: Fan blades are stuck.
• Possible Cause: Fan blades are stuck by a foreign object.
• Solution: Unplug the fan and remove the foreign object.
• Fault: The battery level indicator does not light up.
• Possible Cause: The battery enters into sleep protection.
• Solution: Connect the fan to the charging base to activate the battery.
• Fault: The oscillation function does not work.
• Possible Cause: The fan is under the auto-oscillation state.
• Solution: Wait for the auto-oscillation completes. It will last for 14 seconds at most.

Environmental Notice

The built-in rechargeable li-ion battery of this fan contains chemicals that may pollute the environment. Before disposing of this fan, remove the battery and then discard it at a professional recycling facility.

Steps of Removing the Battery

Warning: The fan will no longer be usable once the battery is removed. The following steps should only be completed upon the permanent disposal of the fan. Do not dismantle the fan on your own for routine maintenance.

1. Turn off the fan and remove the fan base.
2. Take the pads out from the fan base and unscrew the bottom cover of the fan base to remove it.
3. Press the cable connector clip that connects to the battery, and pull out the cable. Then unscrew the battery to remove it.

Note: If you accidentally touch the substances leaked from the battery, wash the affected area with a large amount of water and seek medical attention immediately.

Regulatory Compliance Information

Europe -- EU declaration of conformity

Hereby, Zhejiang Xingyue Electric Equipment Co., Ltd. declares that the radio equipment type BPLDS03DM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Disposal and recycling information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

For detailed e-manual, please go to www.mi.com/global/service/userguide

Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Zhejiang Xingyue Electric Equipment Co., Ltd. (a Mi Ecosystem company)

Address: South Side, 24th Floor, Jinpin Building, Headquarters Center, Yongkang City, Zhejiang Province, China

For further information, please go to www.mi.com