Logitech PRO X SE Gaming Headset Setup Guide
This guide provides instructions for setting up your Logitech PRO X SE gaming headset for PC and console use.
PC Setup
- Plug in the microphone.
- Plug the console/PC cable into the headset.
- Using the USB DAC:
- Plug the console/PC cable into the USB DAC.
- Plug the USB DAC into your PC.
- Using the PC sound card:
- Plug the console/PC cable into the PC splitter.
- Plug the PC splitter into your PC's headphone and microphone ports.
Note: The included USB DAC enables 5-band EQ tuning, DTS Headphone:X 2.0, and Blue VO!CE microphone filters on PC. This requires a Logitech G HUB software download. 5-band EQ tuning, DTS Headphone:X 2.0, and Blue VO!CE are not available when using the PC sound card.
Diagram Description: The diagram illustrates the PC setup. It shows the headset, microphone, USB DAC, and PC connections. The USB DAC connects to the headset cable and then to the PC. Icons indicate features like Blue VO!CE and DTS Headphone:X 2.0 available via the USB DAC.
Console Setup (Xbox™, PlayStation®)
- Plug in the microphone.
- Plug the console/PC cable into the headset.
- Plug the other end into your controller.
Note: Instructions may vary based on your system version. Please check your console manual for additional guidance. Xbox and PlayStation operate in stereo mode only via analog cable. Some Xbox controllers may require an Xbox Stereo Headset Adapter, sold separately. 5-band EQ tuning, DTS Headphone:X 2.0, and Blue VO!CE are not available when connected to the console controller.
Diagram Description: The diagram shows the console setup. It depicts the headset, microphone, controller, and the 3.5mm connection to the controller. Icons indicate features like Blue VO!CE and DTS Headphone:X 2.0 are not available in this configuration.
Microphone Placement
Ideal placement of the microphone is at the corner of your mouth. In this position, your voice can be heard clearly without the microphone picking up breathing sounds.
Diagram Description: The diagrams illustrate optimal microphone positioning relative to the mouth, showing how to achieve clear voice capture while minimizing breathing noise.
Frequently Asked Questions
Q: How do I save a custom EQ to the USB DAC?
A: Connect the USB DAC to a PC's USB port and use G HUB software to download a pre-configured EQ from your favorite pro gamer, or to configure your own custom EQ settings. After using G HUB to save your EQ to the DAC, you can then enjoy your custom settings even on tournament PCs with no G HUB software installed.
Q: Can I save Blue VO!CE settings to the USB DAC?
A: No, Blue VO!CE technology is only available while using G HUB software and the USB DAC on PC.
Q: Can I save DTS Headphone:X 2.0 settings to the USB DAC?
A: No, DTS Headphone:X 2.0 is only available while using G HUB software and the USB DAC on PC.
For more information and software downloads, visit: