SUNDVIK Extendable Bed Assembly Instructions
This document provides assembly instructions for the IKEA SUNDVIK extendable bed.
Parts List
- 16x Screw (106918)
- 4x Screw (105106)
- 4x Screw (117096)
- 18x Wooden Dowel (101359)
- 6x Wooden Dowel (101350)
- 14x Cam Lock (128406)
- 2x Cam Lock (121122)
- 6x Bracket (128546)
- 1x Allen Key (100001)
Assembly Steps
- Attach wooden dowels (101359) to the side panels.
- Connect the side panels using screws (106918) and cam locks (128406).
- Attach the headboard and footboard to the side panels using screws (106918) and cam locks (128406).
- Insert the slatted bed base supports.
- Attach the slatted bed base supports using screws (106918) and cam locks (128406).
- Assemble the extendable sections of the bed frame.
- Secure the extendable sections with screws (105106) and cam locks (128406).
- Attach the protective rails using screws (106918) and cam locks (128406).
- Final tightening of all screws using the Allen key (100001).
Important Notes:
- Ensure all parts are present before starting assembly.
- Follow the steps carefully to ensure correct assembly.
- Do not overtighten screws.
- The bed is extendable, follow specific instructions for adjusting the length.
Diagram Descriptions
The assembly process is illustrated with diagrams showing:
- The required tools (hammer, screwdriver).
- Correct and incorrect methods for joining parts.
- Step-by-step visual guides for connecting panels, attaching supports, and securing the frame.
- Close-ups of specific connections and hardware.
