QSFPTEK S7300-24X2C

Product Overview

The QSFPTEK S7300-24X2C is a next-generation, full 10GE Top-of-Rack (TOR) switch designed for high-performance computing, data centers, and high-end campus networks. It boasts an advanced hardware architecture, supporting up to 2.56Tbps switching capacity in a 1U form factor. The switch features 24x 10GE SFP+ ports and 2x 100GE/40GE QSFP28 ports.

Built on the proprietary BDROS software platform, the S7300-24X2C delivers high-performance L2/L3/L4 wire-speed switching. It integrates advanced services like IPv6, VPN, network security, flow analysis, and virtualization. Key reliability features include continuous forwarding, graceful restarting, and loop network protection, ensuring maximum runtime. The energy-saving design, featuring "GreenTouch" architecture and "Smart@CHIP", offers low power consumption (< 200W).

Product Characteristics

Carrier-Level Aggregation Layer-3 Ethernet Switch

Innovative BVSS (Virtual Switch System) Stacking

• Virtualizes multiple physical devices into a single logical unit, enhancing performance, reliability, and management.
• Improves performance by maximizing link utilization and avoiding STP blocking.
• Ensures high reliability through advanced distributed mechanisms and efficient cross-physical link aggregation, supporting continuous layer-3 routing without service interruption.
• Offers easy management with single IP unified management for the entire virtual system.

Rich Data Center Services

• Supports BVSS for superior performance, reliability, flexibility, and management compared to independent devices.
• Doubles performance by optimizing link usage and preventing STP blocking.
• Provides high reliability with non-stop layer-3 routing forwarding.
• Offers flexibility with cluster systems expandable up to 80KM.
• Simplifies network management through single IP unified management.

Security+

• Equipment-level security features include advanced packet scheduling, protection against DoS/TCP SYN Flood, UDP Flood, Broadcast Storms, and traffic attacks.
• Supports level-based command line protection for differentiated user permissions.
• Includes robust security authentication mechanisms like IEEE 802.1x, Radius, and BDTacacs+.
• Supports storm/multicast/unicast limits and perfect ring detection mechanisms.
• Features port isolation, DHCP Snooping, DAI, IP source guard, and IP+MAC+Port binding.

Versatile IPv6 Solution

• Full IPv6 protocol suite support, including neighbor discovery, ICMPv6, path MTU discovery, DHCPv6.
• Supports IPv6 routing protocols (RIPng, OSPFv3, BGP4+), tunneling (manual, automatic, GRE, 6to4, ISATAP), and IPv4 to IPv6 transition.

Data Center Level High-reliability

• Employs Hitless Protection System (HPS) with redundant power and fan systems, supporting hot-swap and seamless switching.
• Utilizes redundancy protocols like STP/RSTP/MSTP, VRRP, ring network protection, and LACP link aggregation.
• Supports In-Service Software Upgrade (ISSU) for non-stop forwarding.
• Features fault detection and rapid recovery via BFD.
• Includes comprehensive Ethernet OAM (802.3ah, 802.1ag, ITU-Y.1731) for real-time monitoring.
• Achieves high reliability (99.999%) with a Mean Time To Repair (MTTR) of 50ms.

Product Specifications

Key specifications include:

• Interface: 24x 10GE/GE SFP+ ports, 2x 100GE/40GE QSFP28 ports, 1 RJ45 console, 1 MGMT port.
• Switching Capacity: 800Gbps
• Forwarding Rate: 600Mpps
• Chassis Dimensions: 44x440x350 mm
• Chassis Weight: 7.1 KG (empty)
• Power Consumption: 45W (no-load), 70W (full-load)
• Power Supply: 2x (1+1 Redundancy) Hot-swap AC 100V-240V
• MTBF: >200,000 Hours
• Features: VLAN support, Spanning Tree protocols, Multicast, IPv4/IPv6 routing, MPLS, QoS, advanced security, and reliability features.

Ordering Information

The S7300-24X2C is an Ethernet routing optical switch with 24x 10GE ports and 2x 100G ports, configurable for expansion. It includes hot-swap power slots, fans, and is designed for 1U, 19-inch rack-mounting.

For more details, visit QSFPTEK's official website.