Geberit Installation Manual

MONTAGEANLEITUNG | INSTRUCTIONS DE MONTAGE | ISTRUZIONI PER IL MONTAGGIO

KNOW HOW INSTALLED

Step 1: Unpacking

Open the packaging and carefully remove the product. The diagram shows lifting the toilet from its box, revealing a blue protective sheet.

Step 2: Preparation

Attach the blue protective sheet to the product, indicated by label '1' and a warning symbol (⚠️). Then, fold the protective sheet back as shown by label '2'.

Step 3: Adjustments

Perform fine-tuning adjustments as illustrated. This involves setting levels (e.g., +1, -1) and specific measurements (e.g., 42-45, 23) using arrows to indicate direction.

Step 4: Wall Mounting

Drill holes in the wall at the designated points. Attach the mounting bracket or component to the wall using screws, as depicted in the diagram.

Step 5: Measurement and Marking

Measure and mark specific distances on the wall or product for precise alignment. Diagrams show measurements like 'X', 'X + 8.5 cm', and 'X + 1.5 cm', with a tool used for marking.

Step 6: Final Alignment

Position the toilet and check for proper alignment. Diagrams guide the user to ensure the unit is level and correctly positioned visually.

Step 7: Component Connection

Connect the specified components, such as a ring-like fitting, to the toilet body. The diagram illustrates the correct method of attachment.

Step 8: Securing Parts

Insert and secure a blue component into its housing. The diagram shows a rotation action and a checkmark (✔️) indicating correct installation. Another diagram shows a similar component being secured.

Step 9: Water Supply Connection

Connect the water supply hose to the toilet. Diagrams show the correct way to attach the hose, with a checkmark (✔️) for proper connection and a cross (❌) for incorrect. Ensure the connection is secure.

Step 10: Final Toilet Attachment and Adjustments

Attach the toilet to the mounting frame. Make final adjustments, ensuring a clearance of 8 mm where indicated. A checkmark (✔️) confirms correct positioning.

Step 11: Curing Time

Allow a curing time of 24 hours after installation, as indicated by '24 h'.

Step 12: Product Information

Product reference number: 970.990. An information icon (ℹ️) is displayed.

	Geberit Monolith Installation Manual This document provides installation instructions for the Geberit Monolith sanitary module. It includes safety warnings and step-by-step guidance for assembly and mounting.
	Geberit Monolith Installation Manual This manual provides detailed instructions for the installation of the Geberit Monolith system. It includes safety warnings, step-by-step assembly guides, and technical specifications.
	Geberit Duofix Installation Manual: Step-by-Step Guide This installation manual provides detailed, step-by-step instructions for the Geberit Duofix concealed cistern system. It covers frame mounting, pipe connections, and final adjustments, with clear diagrams and multilingual text. Essential for plumbers and DIY installers.
	Geberit Sigma10 Installation Manual: Step-by-Step Guide Comprehensive installation manual for the Geberit Sigma10 WC flush control system. Includes detailed instructions, diagrams, and setup guidance.
	Geberit Toilet Installation Guide Step-by-step installation instructions for Geberit toilet systems, including mounting the frame, connecting water supply, and attaching the toilet bowl.
	Geberit Sigma10 Installation Manual Step-by-step installation guide for the Geberit Sigma10 WC flush control system, covering mounting, connections, and setup for various configurations. Includes multilingual instructions and technical details.
	Geberit Duofix Installation Manual Comprehensive installation guide for Geberit Duofix systems, detailing steps for mounting, connecting, and securing the unit for various toilet installations. Includes diagrams explained in text.
	Geberit Toilet Installation Guide Step-by-step installation instructions for Geberit toilet mounting systems, detailing pipe connections and fixture placement.