User Manual

Power Supply

This LED clock requires a USB power supply (5V/1A).

An AC adapter is not included; please use a compliant adapter.

Remote Control

Remote Control Buttons and Functions

The remote control features the following buttons:

• ① Alarm Setting: Used to set the alarm.
• ② Loop Display: Toggles the display loop for Time, Temperature, and Date on or off.
• ③ Time Setting: Used to set the time.
• ④ Temperature Display: Shows the current temperature in °C or °F.
• ⑤ Brightness Switch: Adjusts the brightness level of the display.
• ⑥ Alarm Setting: Another button for alarm configuration.
• ⑦ Seconds Flashing: Turns the flashing seconds points between hours and minutes on or off.
• ⑧ 12/24H Switch: Switches between 12-hour and 24-hour time formats.
• ⑨ LED Colors: Selects the color of the LED display.
• ⑩ LED Display ON/OFF: Turns the LED display on or off.

Clock Features

Brightness and Display Control

Brightness Setting: Press the [BRIGHT] button to cycle through brightness levels: High, Medium, Low, and Auto. The clock offers 8 levels of automatic brightness adjustment, which adapts to ambient light via a built-in sensor.

LED Display On/Off: Press the [LED Display ON/OFF] button to turn the LED display on or off. This action does not shut down the clock.

Note: Brightness adjustment is only applicable to solid color light modes, not for Gradient Color Light or Neon Light modes.

Temperature Display

Press the [TEMP] button to display the temperature in °C for 5 seconds. Pressing it again switches the display to °F for 5 seconds before automatically returning to clock mode.

Loop Display

Press the [Loop Display] button to enable or disable the display loop for Time, Temperature, and Date.

Light Modes

Gradient Color Light

Press the [Gradient Color] button on the remote control to activate the gradient LED light. Colors will cycle gradually through Red → Orange → Yellow → Green → Blue → Purple → Pink.

Colorful Neon Light

Press the [Colorful Neon Light] button again to set the colorful neon light mode.

You can cycle between gradient and neon light modes by pressing the appropriate button. Use the [USER] button to freeze the gradient or neon color to your preferred custom color.

Operation Modes

Time, Date, and Year Setting (using Remote Control)

1. Press the [CLOCK] button to enter time setting mode. The hour digits will flash. Use the [Up Arrow] or [Down Arrow] buttons to adjust the hour. Press the [Right Arrow] button to move to minutes.

2. Adjust the minutes using the [Up Arrow] or [Down Arrow] buttons. Press the [CLOCK] button to confirm and proceed to date setting.

3. Adjust the month and day using the four arrow buttons. Press [CLOCK] to confirm and proceed to year setting.

4. Adjust the year using the [Up Arrow] or [Down Arrow] buttons. Press [CLOCK] to confirm and return to time mode.

12/24 Hours System (using Remote Control)

Press the [12/24H] button to switch between 12-hour and 24-hour time formats.

Seconds Flashing (using Remote Control)

Press the [Seconds Flashing] button to turn the two flashing seconds points between the hours and minutes on or off.

On-Device Operations

Time, Date, and Year Setting

1. Press the [SET] key to enter time setting mode. The hour digits will flash.

2. Press the [SET] key again to switch between hours, minutes, months, days, and years. Use the [+] or [-] keys to adjust the values. Press [SET] to confirm each setting.

Alarm Setting

1. In clock mode, long-press the [SET] key for 3 seconds to enter alarm setting mode. The hour digits will flash.

2. Adjust the hour using the [+] or [-] keys. Press [SET] to move to minutes and adjust them similarly.

3. Press [SET] to confirm the alarm time. Then press the [-] key to toggle the alarm ON or OFF.

4. Press [SET] to confirm the alarm setting and return to clock mode.

In clock mode, pressing the [+] key displays the alarm time. If the alarm is off, it shows "OFF".

Snooze Function

This clock features a preset snooze function. The alarm will ring 3 times at 5-minute intervals, with each ring lasting 1 minute.

When the alarm rings, press the [ALARM] button to pause and delay the alarm for 5 minutes.

Pressing any button other than [ALARM] will stop the ringing immediately.

To disable the alarm completely, set it to "OFF" as described in the Alarm Setting instructions.

Other Settings

In clock mode, long-press the [+] key for 3 seconds to turn the flashing seconds points on or off.

Long-press the [+] key for 6 seconds on the back of the clock to enable or disable the loop display of Time, Temperature, and Date.

Press the [-] key to display the temperature in °C for 5 seconds. Pressing it again switches the display to °F for 5 seconds, then returns to clock mode.

In clock mode, long-press the [-] key for 3 seconds to adjust the brightness dimming sequence: High, Medium, Low, Auto.

Mounting

Hang on the Wall

The clock can be hung on the wall using the included installation kit. A hook hole is provided on the back of the clock for this purpose.

Specifications

Input

5V/1A (* AC adapter not included)

Weight

152g

Product Dimensions

10.0 x 3.3 x 0.9 inches (254.0 x 83.8 x 22.9 mm)

Package Content

• Digital LED Clock x 1
• Base bracket x 1
• Plug-in USB cable x 1
• Remote control x 1
• Installation kit x 1
• (* AC adapter not included)

Support

For any issues, please contact support@sz-krs.com.cn with your order number and a detailed description of the problem.