User Manual

Power Supply

This LED clock needs a plug in USB power supply (5V/1A). AC adapter is NOT included, please use a compliant adapter.

Remote Control Buttons

The remote control has the following buttons:

• ① Alarm Setting: Press twice to enter Alarm setting, use buttons to switch Hour or Minute, adjust with other buttons, confirm with ALARM button.
• ② Loop display: Press button to turn on/off the Loop Display of "Time", "Temperature" and "Date".
• ③ Time setting: Press CLOCK button to enter time setting, adjust Hour, Minutes, Date, Year using arrow buttons and CLOCK button to confirm.
• ④ Temperature display: Press TEMP button to show temperature in °C or °F for 5 seconds.
• ⑤ Brightness switch: Press BRIGHT button to switch brightness in sequence for "High - Medium - Low - Auto". There are 8 levels of automatic brightness dimming available, which adjust automatically based on the ambient light via the built-in light sensor.
• ⑥ Alarm setting: Long press SET key for 3 secs. to enter alarm setting, adjust Hour and Minute, confirm with SET key. Press '-' key to turn ON or OFF the alarm.
• ⑦ Seconds flashing: Press button to turn on/off the two flashing seconds points between the hours and minutes.
• ⑧ 12/24H switch: Press button to switch 12/24-hour time system.
• ⑨ LED Display ON/OFF: Press button to turn on or off the LED light.
• ⑩ LED Colors: Buttons to select different LED colors.

Gradient Color: Press the "●" button to set the gradient color LED light, which will start gradual changes cyclically for red → orange → yellow → green → blue → Purple → Pink.

Colorful Neon Light: Press the "●" button again to set it for the colorful neon light.

You can press the "●" button to set the gradient color LED light and colorful neon light in turns.

Press the "USER" button to make the gradient color or neon color stand still as your custom light color.

Function

Time/Date/Year setting

1. Press the "CLOCK" button to enter the time setting, the Hour numbers start to flash. Press the ▲ or ▼ button to adjust the hour, after that press the ▶ button and skip to set the minutes.

2. Adjust the minutes via the ▲ or ▼ button, finally, press the "CLOCK" button to confirm time setting and skip to Date setting.

3. Adjust the month and day numbers via these 4 arrow buttons (▲ ▼ ◀ ▶), and press "CLOCK" button to confirm date setting and skip to Year setting.

4. Adjust the Year numbers via the ▲ or ▼ button, finally press the "CLOCK" button to confirm setting and back to time mode.

12/24 Hours System

Press ◂ button to switch 12/24-hour time system.

Seconds flashing

Press ◂ button to turn on/off the two flashing seconds points between the hours and minutes.

Button Operations (Remote Control)

Time/Date/Year setting:

1. Press the "SET" key to enter the time setting.

2. Press the "SET" key again to switch between hours, minutes, months, days and years, and adjust these datas via "+" or "-" key, then press "SET" key to confirm setting.

Alarm setting

1. In clock mode, long press the "SET" key for 3 secs. to enter into the alarm setting, the HOUR numbers will flash.

2. Adjust the Hour via "+"/ "-" key, then press the "SET" key and skip to the minute numbers, to set via "+"/ "-" key.

3. Press the "SET" key to confirm the alarm time, then press the "-" key to turn ON or OFF the alarm clock.

4. Finally, press the "SET" button to confirm alarm setting and back to clock mode.

In clock mode, press the "+" key, it will show the alarm time, or if the alarm was turned off, it will show "OFF".

Other settings

In clock mode, long press "+" key for 3 secs. to turn on/off the two flashing seconds points in the middle.

Alarm setting

1. Press "ALARM" button twice to enter Alarm setting, press ◀ or ▶ button to switch the Hour or Minute setting, then adjust datas via ◀ or ▶ button.

2. Press "ALARM" button to confirm the alarm time.

3. Press ▶ button to set the alarm clock "ON" or "OFF".

4. Finally press the "ALARM" button to confirm and back to clock mode.

In clock mode, press "ALARM" button, it'll show the preset alarm time, or if the alarm was turned off, it'll show "OFF".

Snooze

This LED clock has a preset Snooze function, which means the bell will ring 3 times at 5 minutes intervals, and 1 minute per ring.

When the bell rings, you can press the "ALARM" button to pause ringing and delay the alarm for 5 minutes.

When the bell rings, you may press any buttons besides "ALARM" button to stop ringing right away.

If you want to close the alarm entirely, please set the alarm OFF as above Alarm Setting descriptions.

Long press the ◀ key for 6 secs. on the back of the clock to turn on/off the Loop Display of "Time", "Temperature" and "Date".

Press ▼ key to show the Temperature in °C for 5 secs., or press it again to show it in °F for 5 secs., then back to clock mode automatically.

In clock mode, long press the ▼ key for 3 secs. to set the brightness dimming in sequence for "High - Medium - Low - Auto".

Hang on the wall (desk clock/wall clock)

To hung up on the wall with included installation kit.

Specifications

Input: 5V/1A (* AC adapter is not included)

Weight: 152g

Product Dimensions: 10.0 x 3.3 x 0.9 inches (254.0 x 83.8 x 22.9 mm)

Package content

• Digital Led clock x 1
• Base bracket x 1
• Plug in USB cable x 1 (* AC adapter is not included)
• Remote control x 1
• Installation kit x 1