ActronAir Two-Piece Fan Coil Advance Models - 3-Phase
The ActronAir Two-Piece Fan Coil Advance Models offer a versatile solution for challenging installation environments, featuring separate, compact, and lightweight fan and coil sections that are connected by flexible ducting. This system is designed for ease of installation in difficult roof spaces.
System Overview
The system comprises an Outdoor Unit with a power supply of 400V/3Ph + N / 50Hz and an Indoor Unit, which is split into a Fan Section and a Coil Section. These sections are connected via flexible ducting, with a maximum cable length of 7.5 meters. Ducting can be attached using 1, 2, or 3-way EASY FIT supply plenums or twin spigot duct plates, which can be fitted to either side of the units. The system supports ducting lengths between 0.0m and 6.0m.
Outdoor Unit Power Supply: 400V / 3Ph + N / 50Hz
Indoor Unit Power Supply: 230V / 1Ph + N / 50Hz
Unit Features
- Designed for ease of installation in difficult roof spaces.
- Mounting studs for perforated hanging strap.
- Incorporates the EASY FIT supply & return air plenum system.
- Reduces return air noise.
- Integrated Primary and Safety Drain Trays.
- Supplied with Drain Kit & P-Trap (Except Model EAA210S & EAA240S).
Model Combination Capacity Ratings and Electrical Data
| Outdoor Unit | Indoor Coil Section | Indoor Fan Section | Total Cooling Capacity (kW) | Total Heating Capacity (kW) | Airflow (l/s) (Min/Nom/Max) | RLA (OD/ID/Total) | FLA (OD/ID/Total) |
|---|---|---|---|---|---|---|---|
| CRV160T | EAA160S | EFV160S | 14.25 | 14.75 | 600/750/900 | 6.0/2.2/8.2 | 11.9/3.2/15.1 |
| CRV180T | EAA180S | EFV180S | 16.30 | 16.70 | 680/850/1020 | 7.8/2.7/10.5 | 11.8/4.4/16.2 |
| CRV210T | EAA210S | EFV210S | 19.40 | 19.60 | 810/1020/1230 | 7.8/3.6/11.4 | 16.4/5.5/21.9 |
| CRV240T | EAA240S | EFV240S | 22.06 | 22.50 | 900/1130/1360 | 8.4/3.8/12.2 | 16.6/6.0/22.6 |
Weights and Dimensions
Coil Section
| Model | Weight (kg) | Height (mm) | Depth (mm) | Width (mm) |
|---|---|---|---|---|
| EAA160S | 29 | 410 | 342 | 1252 |
| EAA180S | 39 | 435 | 342 | 1360 |
| EAA210S | 40 | 486 | 342 | 1410 |
| EAA240S | 43 | 486 | 342 | 1410 |
Fan Section
| Model | Weight (kg) | Height (mm) | Depth (mm) | Width (mm) |
|---|---|---|---|---|
| EFV160S | 31 | 408 | 362 | 1072 |
| EFV180S | 31 | 408 | 362 | 1072 |
| EFV210S | 43 | 483 | 412 | 1269 |
| EFV240S | 43 | 483 | 412 | 1269 |
Detailed Unit Dimensions and Clearances
Fan Section Dimensions
EFV160S / EFV180S Fan Section: Overall nominal dimensions are 408mm (Height) x 1072mm (Width) x 362mm (Depth). The supply duct is 168mm (H) x 708mm (W), and the return duct is 378mm (H) x 900mm (W). Minimum service access clearances required are 800mm around the unit, with a height clearance of 340mm.
EFV210S / EFV240S Fan Section: Overall nominal dimensions are 483mm (Height) x 1269mm (Width) x 412mm (Depth). The supply duct is 200mm (H) x 714mm (W), and the return duct is 453mm (H) x 1095mm (W). Minimum service access clearances required are 890mm around the unit, with a height clearance of 410mm.
Coil Section Dimensions
EAA160S Coil Section: Overall nominal dimensions are 410mm (Height) x 1252mm (Width) x 342mm (Depth). The supply duct is 345mm (H) x 900mm (W), and the return duct is 345mm (H) x 900mm (W). It features a Gas Pipe connection of Ø19.05mm (3/4") and a Liquid Pipe connection of Ø9.52mm (3/8"). Minimum service access clearances required are 800mm around the unit, with a height clearance of 340mm.
EAA180S Coil Section: Overall nominal dimensions are 435mm (Height) x 1360mm (Width) x 342mm (Depth). The supply duct is 362mm (H) x 1094mm (W), and the return duct is 362mm (H) x 1094mm (W). It features a Gas Pipe connection of Ø22.22mm (7/8") and a Liquid Pipe connection of Ø9.52mm (3/8"). Minimum service access clearances required are 800mm around the unit, with a height clearance of 410mm.
EAA210S / EAA240S Coil Section: Overall nominal dimensions are 486mm (Height) x 1410mm (Width) x 342mm (Depth). The supply duct is 410mm (H) x 1094mm (W), and the return duct is 410mm (H) x 1094mm (W). It features a Gas Pipe connection of Ø25.4mm (1") and a Liquid Pipe connection of Ø12.7mm (1/2"). Minimum service access clearances required are 890mm around the unit, with a height clearance of 410mm.
Supply Plenum and Duct Plate Options
The system offers various supply plenum and duct plate options for connecting the fan and coil sections, ensuring compatibility with different installation requirements. These options include:
2-Way Supply Plenums
- PL18S-2/35S: 2 x 350mm spigots
- PL20S-2/40S: 2 x 400mm spigots
- PL34S-2/45S: 2 x 450mm spigots
3-Way Supply Plenums
- PL13S-3/30S: 3 x 300mm spigots
- PL18S-3/35S: 3 x 350mm spigots
- PL20S-3/SPS: 1 x 350mm, 1 x 400mm, 1 x 350mm spigots
- PL22S-3/35S: 3 x 350mm spigots
- PL30S-3/40S: 3 x 400mm spigots
- PL34S-3/45S: 3 x 450mm spigots
Twin Spigot Duct Plates
- PLDP-2/400: 2 x 400mm spigots
- PLDS-2/400: 2 x 400mm spigots
- PLDT-2/450: 2 x 450mm spigots
A compatibility matrix is available (detailed in the original document) that specifies which plenum and duct plate options are suitable for each specific model combination (EAA/EFV models).
