Airdeer Automatic Trash Can

Part Names and Locations

The Airdeer Automatic Trash Can features several key components:

• Flip lid
• Bag cabin lid
• Big lid
• Infrared sensor port
• Touch key
• Can body

These parts are illustrated in the accompanying diagram, showing their placement on the unit.

Install the Refill Ring

Follow these steps to install the refill ring:

1. Remove the bag cabin lid.
2. Place the new refill ring into the designated area.
3. Compress the refill ring evenly around its circumference.
4. Securely put the bag cabin lid back on.
5. Pull the stitching thread to ensure the bag is properly positioned.
6. To complete the auto bag loading process, turn on the power switch or long-press the touch key.

Auto Packing and Bag Changing

The trash can is equipped with an automatic packing and bag changing feature, activated via the 'Touch key'.

To initiate this function:

1. Long press the touch key.
2. The trash can will respond with a "di-di-di-" sound.
3. Continue holding the key until the voice prompt "Start packing" is heard.
4. Follow any subsequent voice prompts for completion.

Open the Flip Lid

The flip lid can be opened using two convenient methods:

• Method 1: Approach the trash can and wave your hand or an object into the infrared sensing area.
• Method 2: Bend your knee slightly in front of the trash can to trigger the sensor.