Makita TD004G Cordless Impact Driver
Model No. TD004G
Exploded View Diagram Description
The diagram displays the internal and external components of the Makita TD004G Cordless Impact Driver in an exploded configuration, allowing for clear identification of each part. The numbered components in the diagram correspond to the item codes and descriptions listed in the table below. Key assemblies visible include the motor housing, the impact mechanism, the control electronics, the trigger assembly, and the battery connection point.
Parts List
| Part Index | Item Code | Description | Quantity | Notes |
|---|---|---|---|---|
| 001 | 232911-3 | Retaining Ring 12 | 1 | |
| 002 | 347E43-4 | RING 13 | 1 | |
| 003 | 232970-7 | COMPRESSION SPRING 14 | 1 | |
| 004 | 327B23-8 | Bit Holder | 1 | |
| 005 | 232800-2 | Leaf Spring | 1 | |
| 006 | 216001-0 | Steel Ball 3.5 | 2 | |
| 007 | 422584-2 | Bumper | 1 | |
| 008 | 412822-0 | Hammer Case Cover | 1 | |
| 009 | 266130-9 | Self-tapping Screw with Cylindrical Head 3X16 | 8 | |
| 010 | 8148R9-8 | TD004G NAME PLATE | 1 | |
| 011 | 1831C5-3 | HOUSING SET | 1 | |
| C10 | 263005-3 | Rubber Cap 6 | 2 | |
| C20 | 263032-0 | Rubber Cap 4 | 2 | |
| C30 | 252126-6 | Hexagonal Lock Nut M4-7 | 2 | |
| 012 | 1410F8-8 | Hammer Case Complete | 1 | |
| 013 | 265472-8 | Screw with Internal Hexagon Head M4X25 | 4 | |
| 014 | 261154-0 | Nylon Washer 28 | 1 | |
| 015 | 327E50-3 | Bumper M | 1 | |
| 016 | 327E53-7 | Hammer | 1 | |
| 017 | 216001-0 | Steel Ball 3.5 | 24 | |
| 018 | 267175-0 | Flat Washer 24 | 1 | |
| 019 | 267106-9 | Flat Washer 18 | 1 | |
| 020 | 232910-5 | Compression Spring 25 | 1 | |
| 021 | 232909-0 | Compression Spring 18 | 1 | |
| 022 | 216011-7 | Steel Ball 5.6 | 2 | |
| 023 | 227350-0 | Wheel with Peripheral Gearing 2 | 3 | |
| 024 | 327E52-9 | Spindle | 1 | |
| 025 | 268311-1 | Pin/Dowel 5 | 3 | |
| 026 | 233910-8 | Retaining Ring 43 | 1 | |
| 027 | 227337-2 | Internal Gear Set 51 | 1 | |
| 028 | 213785-1 | O-ring 49 | 1 | |
| 029 | 140W14-6 | Internal Gear Set Bushing Complete | 1 | |
| 030 | 266490-9 | Self-tapping Screw with Flat Head 2X6 | 3 | |
| 031 | 652069-6 | Screw with Flat Head M3X6 | 3 | |
| 032 | 629C87-7 | Stator | 1 | |
| 033 | 620R27-8 | Control Unit | 1 | |
| 034 | 619626-3 | Rotor | 1 | |
| 035 | 4131N7-5 | Rear Cover | 1 | |
| 036 | 266130-9 | Self-tapping Screw with Cylindrical Head 3X16 | 2 | |
| 037 | 620521-2 | Perimeter LED | 1 | |
| 038 | 455053-8 | Forward/Reverse Switch | 1 | |
| 039 | 651442-7 | Switch C3JR-1A-1 | 1 | |
| 040 | 141M86-4 | Switch Board/Switch Plate Assembly | 1 | |
| 041 | 632P49-4 | Terminal Block Unit | 1 | * |
| 041-1 | 632W77-1 | TERMINAL UNIT | 1 | < |
| 042 | 8148S1-1 | TD004G SERIAL NO. LABEL | 1 | |
| 043 | 1831C5-3 | HOUSING SET | 1 | |
| A01 | 266622-8 | Screw with Compartment Head M4X12 | 1 | |
| A02 | 346317-0 | Hook | 1 |
Please refer to the Item Code when ordering replacement parts.
