mailto:Service@jatrhg.com
User Guide for JATRHG models including: Ramp_v1 Cable Channel Speed Bump, Ramp_v1, Cable Channel Speed Bump, Channel Speed Bump, Speed Bump
JATRHG Rampes de protection de câbles - jatrhg.com
Product Introduction The Cable Channel Speed Bump is designed for efficient cable protection and vehicle speed reduction. This product is ideal for application on road surfaces, parking lots,
File Info : application/pdf, 4 Pages, 171.79KB
DocumentDocumentCable Protection Ramp User Guide Version: V1.0 11-01-2024 ©2024 by JATRHG® All rights reserved. TAMITO SAS, 176 Avenue Charles De Gaulle, 92200, Neuilly-Sur-Seine, FR Model : Ramp_v1 Product Introduction The Cable Channel Speed Bump is designed for efficient cable protection and vehicle speed reduction. This product is ideal for application on road surfaces, parking lots, construction sites, gardens, and other similar areas. It helps ensure the safety and integrity of cables and provides a reliable solution for traffic calming. Product Specifications Dimensions Each unit Weight Each unit Material Load Capacity Number of Channels Channel Size 100 cm(L) x 20 cm(W) x 5 cm(H) . 4kg PVC Max 4968 kg. 2 3cm x 3cm Safety Instructions for Installation Site Preparation: Ensure the installation area is clean, dry, and free of any debris. The surface should be flat to avoid improper placement. Handling: Although the material is durable, avoid dropping the speed bumps from heights as this could cause damage. Visibility: Install in well-lit areas or use additional signage to warn incoming drivers of the speed bump's presence. Check Regularly: Periodically inspect the speed bump for any signs of wear or damage, and ensure the channels remain clear of debris. Compliance with Local Regulations: When constructing, adhere to local construction regulations. Pay attention to personal safety and road safety regulations while arranging the product. Installation Steps 1. Positioning: Place the speed bump at the desired location. Make sure the channels are aligned in the direction of the cable runs. 2. Connecting Units: If more than one speed bump is required, connect the units at the ends. Align the connectors and gently press each unit together to lock them in place. 3. Securing: Use the nail reinforcement area to securely fasten the speed bump to the ground. This prevents shifting and ensures stability. 4. Cable Insertion: Lift the yellow covers and place the cables within the channels. Ensure the cables fit snugly and do not protrude above the top surface of the speed bump. 5. Cover Replacement: Replace the yellow covers to secure the cables and complete the installation. Ensure all steps are followed correctly to maintain functionality and safety. The Cable Channel Speed Bump is a practical solution for managing both vehicle traffic and cable protection in various environments. For more information and video tutorials about using and installation of the EV charger, please visit our website: jatrhg.com By email: service@jatrhg.com Online chat: jatrhg.com Telephone: (+33) 01 84 18 10 10 TAMITO SAS 176 Avenue Charles de Gaulle, 92200 Neuilly-Sur-SeineFR Service@jatrhg.com (+33) 01 84 18 10 00