Sony INZONE KBD-H75 Gaming Keyboard

Getting Started

Model: YY2992

Using the Keyboard

You can use the keyboard by connecting it directly to your computer using the USB Type-C cable.

Using all functions and better performance

Update the "INZONE Hub" computer software to the latest version. For details about "INZONE Hub", visit the following URL:

https://www.sony.net/inzonehub-support

Please note that this manual was translated by machine. Machine translations are not context-sensitive and may not perfectly match the English version of the content. To view the original English version, select English from the [Language selection page] item.

Included Accessories

After opening the package, check if the package contains all the items listed. If any items are missing, contact your Sony customer support representative or your nearest Sony product dealer.

Numbers in parentheses indicate the number of items.

• Gaming Keyboard (1)
• USB Type-C® Cable (USB-A to USB-C®) (1)
• Documents (1 set)

Note

The rubber feet on the gaming keyboard are consumable parts. If the rubber feet are damaged and need replacement, contact Sony customer support or your nearest Sony dealer.

Parts and Controls

Top Part

Diagram showing the top of the keyboard with a USB Type-C port labeled '1' and a volume dial labeled '2'.

1. USB Type-C Port

Connect the keyboard to your computer using the supplied USB Type-C cable.

2. Volume Dial

Adjust your computer's volume. Pressing the volume dial mutes the sound. Pressing again unmutes it.

Bottom Part

Diagram showing the bottom of the keyboard with folding feet labeled '3' and a serial number label labeled '4'.

3. Folding Feet

The folding feet are folded when purchased.

4. Serial Number

Indicator Information

You can check various keyboard statuses using the key backlight status.

Tip: You can set the color of the lighting that lights up or blinks using "INZONE Hub".

Power Status

The lighting is displayed on the entire key. This occurs when the keyboard is powered on by connecting to a powered-on computer.

Key Operation Status

• The Caps Lock key (A) lights up. (1) When Caps Lock is enabled. (2)
• The Fn key (D) lights up. (1) When the function lock is enabled. (3)

Other Information

• Win key (B), Fn key (D), and C key (C) blink slowly and repeatedly. When BIOS mode is enabled. (4)
• The entire key blinks slowly and repeatedly.
• Software Update: The entire key blinks 4 times.
• After the initialization process is complete: Refer to "Initializing the keyboard to restore factory settings".

(1) You can use the "INZONE Hub" screen to turn off the lights. In that case, turn off the lighting setting.

(2) The state where the Caps key is pressed and alphabetical input is always fixed to uppercase.

(3) The state where the Fn key is locked by pressing the key – while holding down the Fn key.

(4) Mode that allows the keyboard to be correctly recognized by the BIOS on older motherboards.

Adjusting Key Backlight Brightness

Press the Up arrow key (E) while holding down the Fn key (D). The light on the key becomes brighter with each press.

Press the Down arrow key (F) while holding down the Fn key (D). The light on the key becomes dimmer with each press.

Using the Keyboard

1. Connecting the Keyboard

Connect the supplied USB Type-C cable (A) to the USB Type-C port on the keyboard.

Diagram showing a USB Type-C cable connecting to the keyboard.

2. Connecting to the Computer

Connect the USB Type-C cable, which is connected to the keyboard, to a USB port on your computer.

Diagram showing the keyboard connected via USB Type-C to a computer monitor and tower.

The keyboard will turn on, and the lighting will appear across all keys.

Keyboard Operations

Operate the keyboard when it is connected to your computer.

Tip: Even if you assign different functions to specific keys using the "INZONE Hub" key assignment settings, you can still use the keyboard operations listed in the table above to switch keyboard operations and adjust key backlight brightness.

What You Can Do with "INZONE Hub"

When you connect the keyboard to your computer using the "INZONE Hub" installed software, you can perform the following actions:

• Key assignment settings
• Macro function settings
• ACTIVATE POINT function settings: You can adjust the key press depth. A lower value allows for faster input with a light press.
• QUICK START function settings: You can set the distance between the key position upon input and the position where the input is canceled or repeated. If the distance is too short, canceling or repeating input can be done with minimal key movement, improving control response.
• Lighting settings
• DISABLE SPECIFIC KEY function settings
• ULTRA LOW LATENCY MODE function settings
• CALIBRATION function
• Check and update keyboard software version
• Manage profiles (Load/Save/Import/Export)
• Application synchronization settings

For details about "INZONE Hub", visit the following URL:

https://www.sony.net/inzonehub-support

Tip: The valid range for QUICK START is indicated by a gray bar in "INZONE Hub". Set the QUICK START value within the valid range.

Installing the "INZONE Hub" Website

1. Download and Install INZONE Hub Software

Download the "INZONE Hub" software from the support website and install it on your computer.

For detailed information, visit the following URL:

https://www.sony.net/inzonehub-support

Supported Operating System: Windows® 10 or later

2. Launch "INZONE Hub" after installation.

How to Update Software (for comfortable keyboard use)

Install the latest keyboard software using "INZONE Hub" to utilize new features or resolve certain keyboard issues.

Always use the keyboard with the latest software installed.

For details about the latest keyboard software and how to update it, refer to the information on the support website.

https://www.sony.net/inzonehub-support

Related Topic:

• What You Can Do with "INZONE Hub"

Safety Precautions

Information on Volume Dial

You can use the volume dial on the top right of the keyboard to adjust the volume of your connected computer. Volume cannot be adjusted through headphones. If you are using a Sony Gaming Headset, the volume dial allows you to adjust the headset volume using "INZONE Hub".

USB Cable Information

• Use the supplied USB Type-C cable.
• When connecting the USB Type-C cable, do not apply excessive force to the connection part.
• When connecting or disconnecting the USB Type-C cable, do not apply excessive force, such as pulling the cable, and connect or disconnect the connector directly to the port.
• If the USB Type-C cable connector is deformed, such as bent, stop using it immediately.
• The supplied USB Type-C cable may bend during use, but this is not unusual.

Further Notes

• The keyboard is a precision device. Do not drop, strike, or otherwise expose the keyboard to excessive impact.
• Wipe the plug occasionally with a dry, soft cloth.
• Wipe the exterior with a dry, soft cloth.
• For stubborn stains, moisten a soft cloth with warm water and then wipe it. Do not use cleaning agents, alcohol, or similar substances, as they may cause discoloration or damage. Use a soft brush or similar item to remove dust and wipe gently.
• Do not apply weight or pressure to the keyboard for extended periods. This may cause deformation. Do not force the keyboard when storing it.
• If you experience discomfort while using the keyboard, stop using it immediately.
• Avoid prolonged use and storage at high temperatures and humidity, especially at temperatures above 60°C (140°F). This may cause malfunctions.
• If you have any further questions or problems, contact your Sony support representative or your nearest Sony dealer.

To Prevent Fire or Malfunction Due to Wetting

Keyboard Water Resistance

The keyboard is not water-resistant. If water or foreign matter enters the keyboard, it may result in fire or malfunction.

Avoid the following situations and be careful not to expose the keyboard to moisture or dirt:

• Touching the keyboard with wet hands after doing housework in the kitchen or washing hands in the sink.
• Touching the keyboard with sweaty hands or using the keyboard in situations where the keyboard may become soaked with sweat.
• Spilling drinks while eating or drinking.

If the Keyboard Gets Wet or Water Enters It

Using a wet keyboard may result in fire or malfunction. If water gets on it, take the following steps:

1. Disconnect the USB Type-C cable.

Diagram showing the keyboard being turned upside down.

2. Turn the keyboard upside down to drain any water from the inside.

3. Place a dry cloth under the USB Type-C port to absorb any water draining from the inside.

4. Wipe the entire keyboard with a cloth, etc.

5. Leave the keyboard on a soft cloth, etc., in a well-ventilated, shaded place until it is completely dry.

Contact your Sony support representative or your nearest Sony dealer. If the keyboard fails due to liquid spillage, it will be repaired for a fee, even if it is within the manufacturer's warranty period. If you purchased an extended warranty from the store or a Sony dealer at the time of purchase, check the warranty details.

Licenses

Services provided by third parties may change, be suspended, or be terminated without prior notice. Sony is not responsible for such situations.

Network services, content, and (operating system and) software for this product may be subject to individual terms and conditions, and may change, be interrupted, or terminated at any time, and may require fees, registration, and credit card information.

Trademarks

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the USA and/or other countries.

USB Type-C® and USB-C® are registered trademarks of the USB Implementers Forum.

Sony and INZONE are registered trademarks or trademarks of Sony Group Corporation or its affiliates.

All other trade names and registered trademarks are trade names or registered trademarks of their respective owners. Trademarks ™ and ® are not indicated in this manual.

Customer Support Websites

For customers in the USA, Canada, and Latin America:

https://www.sony.com/am/support

For customers in Europe:

https://www.sony.eu/support

For customers in China:

https://service.sony.com.cn

For customers in other countries and regions:

https://www.sony-asia.com/support

Troubleshooting

How to Resolve a Problem?

Before requesting a repair, recheck the following items:

• Disconnect the USB Type-C cable from the computer's USB port and reconnect it.
• Restart your computer. Some problems may be resolved by restarting the computer.
• Initializing the keyboard to restore factory settings. Profile settings, etc., will be restored to default factory settings.
• Search for information about the problem on the customer support website.

If the problem persists, contact Sony support or your nearest Sony dealer.

Related Topics:

• Customer Support Websites
• Initializing the keyboard to restore factory settings

Cannot Connect to Computer

• Use the supplied USB Type-C cable.
• Check if the USB Type-C cable is inserted as securely as needed.
• Connect the USB Type-C cable directly to the computer, not through a USB hub.
• Disconnect the USB Type-C cable from the computer's USB port and reconnect it to a different USB port.
• Restart the computer and reconnect the USB Type-C cable.
• If the above measures are not successful, try the following steps:
  1. Turn off the computer.
  2. Disconnect and reconnect the USB Type-C cable.
  3. Turn on the computer.
• Initializing the keyboard.

Related Topics:

• Using the Keyboard
• Keyboard operation is unstable.
• Initializing the keyboard to restore factory settings

Keyboard Cannot Be Operated

• Use the supplied USB Type-C cable.
• Check if the USB Type-C cable is inserted as securely as needed.
• Connect the USB Type-C cable directly to the computer, not through a USB hub.
• Disconnect the USB Type-C cable from the computer's USB port and reconnect it to a different USB port.
• Restart the computer and reconnect the USB Type-C cable.
• If the above measures are not successful, try the following steps:
  1. Turn off the computer.
  2. Disconnect and reconnect the USB Type-C cable.
  3. Turn on the computer.
• Initializing the keyboard.

Related Topics:

• Keyboard operation is unstable.
• Initializing the keyboard to restore factory settings

Keyboard Operation is Unstable

• Use the supplied USB Type-C cable.
• Disconnect the USB Type-C cable from the computer's USB port, wait a few seconds, and reconnect it.
• Disconnect the USB Type-C cable and the keyboard, wait a few seconds, and reconnect them.
• If your computer has another USB port, try connecting to a different USB port.
• Connect the keyboard directly to the computer, not through a USB hub.
• Foreign objects lodged between keys may cause a key to remain pressed when it is pressed. Check if there are any objects between the pressed keys. If there is a foreign object, remove it carefully.
• If you are using an unsupported operating system, use a supported operating system. Some software may not be compatible depending on the software used.
• When playing games on your computer, you may resolve this issue by closing unnecessary applications or windows, or by restarting your computer.
• Initializing the keyboard.

Related Topics:

• Using the Keyboard
• Initializing the keyboard to restore factory settings

A Different Character is Entered Than What is Set for the Key

The keyboard uses an American layout. It is possible to enter characters different from those set on the buttons.

Change the operating system setting to the American layout.

Keycap Has Come Off

If a keycap comes off and cannot be reinstalled properly, do not force it and contact your Sony support representative or your nearest Sony dealer.

Note: If, upon inspection when receiving the keyboard, it is found that the following conditions are met, the keyboard may be repaired for a fee. Please understand this in advance.

• If you fail to successfully reinstall the keycap yourself.
• If you damage or deform any part during your own installation.
• If keyboard components or the keyboard itself are damaged or deformed.
• If keyboard components or the keyboard itself are lost.

Initializing the Keyboard to Restore Factory Settings

If the keyboard is not functioning correctly, initialize it.

1. Disconnect the USB Type-C cable connected to the keyboard from the computer.

Diagram showing the USB Type-C cable being disconnected from the computer.

2. While holding down the Esc key and the F4 key, connect the USB Type-C cable connected to the keyboard to a USB port on the computer.

You should hold down the Esc and F4 keys for approximately 5 seconds. After initialization is complete, the entire button will blink four times.

This initializes all keyboard settings to their default factory values.

If the keyboard still does not function correctly after initialization, contact your Sony support representative or your nearest Sony dealer.

Technical Specifications

Gaming Keyboard (YY2992)

• Size: 75% keyless
• Key Layout: US Layout
• Connection Type: Wired connection
• Interface: USB 2.0
• Connector: USB Type-C
• Power Source: Can be powered via USB interface (5 V, 500 mA)
• Compatible OS: Windows 10 or later
• Operating Temperature: 0°C to 40°C
• Switch Type: Magnetic switches
• Polling Rate: 8,000 Hz
• Keycaps: Double-shot PBT keycaps
• Media Key: Volume Dial
• Built-in Memory Function: Supports profiles
• Supported Software: INZONE Hub

Dimensions:

Approx. 318.8 mm × 37.5 mm × 132.3 mm (width × height × depth)

Weight:

810 g

Design and specifications are subject to change without prior notice.