Razor Power Core E90 Sprint Battery Replacement Procedures

Part #: W20136401003

Required Tools: (Not included)

A. Phillips screwdriver

▲ WARNING

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.

Step 1

Using a Phillips screwdriver, remove the five (5) screws from the side with the power switch.

[Image description: Underside of the Razor Power Core E90 Sprint showing the location of five screws on the side panel with the power switch.]

Step 2

Pull the cover off. Be careful not to damage the wires for the charger port and power switch. Set cover aside.

[Image description: Close-up of the scooter's interior after the side cover has been removed, showing wires connected to the charger port and power switch.]

Step 3

Using a Phillips screwdriver, remove the two (2) screws (on both sides of the battery) from the battery strap. Remove battery strap and set aside.

[Image description: The battery compartment with the battery strap secured by two screws, one on each side. The screws are being removed with a Phillips screwdriver.]

Step 4

Locate and disconnect the battery from the controller. Remove the battery.

[Image description: Hand disconnecting the battery connector from the scooter's controller. The old battery is shown partially removed from its compartment.]

Step 5

Reverse the steps:

Place the New Battery inside unit
Re-connect the Battery and Control Module
Place the Bracket back on the top of the battery
Re-attach battery cover with screws.

ATTENTION: Charge battery 12 hours before using.

	Razor Power Core E90 Sprint Front Fork Installation Guide Step-by-step instructions for installing the front fork on a Razor Power Core E90 Sprint electric scooter, including required tools and safety precautions.
	Razor Scooter Promotion: Discount Codes June 27-29 Official regulations for the "Razor Scooter Discount Codes June 27-29" promotion. Learn about product eligibility, discount application, terms, and conditions for purchasing Razor scooters and other products from Sferis.
	Razor Power A5 Battery Replacement Guide Step-by-step instructions for replacing the battery in a Razor Power A5 electric scooter, including required tools and safety precautions.
	Razor Dirt Quad Battery Replacement Instructions Step-by-step guide for replacing the battery in a Razor Dirt Quad, including required tools, safety precautions, and detailed instructions.
	Crazy Cart 2014 Foot Pedal Throttle Replacement Procedures Step-by-step instructions for replacing the foot pedal throttle on a 2014 Crazy Cart, including reverse procedures and charging instructions.
	Razor Power Core E90/E95/Glow Electric Scooter User Guide This owner's manual provides essential safety precautions, operating instructions, and maintenance guidelines for the Razor Power Core E90, E95, and Glow electric hub motor scooters.
	Razor Rambler 16 Battery Replacement Instructions Detailed instructions for replacing the battery on the Razor Rambler 16 electric ride-on toy. Includes required tools, safety warnings, and step-by-step procedures.
	Razor Product Barcode Locations Guide A comprehensive guide detailing the barcode locations for various Razor electric ride-on products, including scooters, go-karts, and more. This document lists specific models and the corresponding locations on the product where barcodes can be found.