AIM ECU Taipan K & accessories

Technical specifications

Plug 'n play ECU for:

Additional characteristics to the stock ECU:

• Two 0-5V analog inputs sampled @ 1,000 Hz each, could be alternatively used as switch to ground
• One low side driver (1A)
• 1 CAN bus for calibration purposes
• IMU
• Pitch/Roll
• Power consumption 150 mA
• Connectors: n.1 JST 04T-JWPF-VSLE-S connector, n.1 JST 08R-JWPF-VSLE-D connector, n.1 64 pins male connector
• Body: PA6 + 30% glass fiber + EPDM cover
• Dimensions: 112x100x40.8 mm
• Weight: 390 g approx
• Waterproof: IP67

Part numbers

ECU Taipan K & accessories

• XE1ECUTKO: ECU Taipan K
• XE1HBS200: HBS2 (cable V2596160 is necessary)
• V02596160: CAN + EXT Power Taipan K cable
• X08CANBTM00: CAN-BT Module + ECU AIM Harness 40 cm
• XE1UCB000: UC Bridge
• XE1UCBT00: UC Bridge Tuner

Pinout

ECU CONNECTOR

JST 04T-JWPF-VSLE-S CONNECTOR EXT VIEW

• 1 - GND
• 2 - CAN CAL HIGH
• 3 - CAN CAL LOW
• 4 - 8V IN

JST 08R-JWPF-VSLE-D CONNECTOR EXT VIEW

• 1 - +12V OUT
• 2 - DNC
• 3 - SPARE LOW SIDE
• 4 - GND
• 5 - SPARE ANALOG 1
• 6 - SPARE ANALOG 2
• 7 - Vref
• 8 - DNC

Functional diagram

The diagram illustrates the connection of the AIM ECU Taipan K with various components including a PC, UC Bridge, LCU1S, Solo 2 DL/ECULog, and a motorcycle via CAN bus cables. It shows the data flow and connectivity between these devices.

Optional cables

1. UC Bridge extension cable 2 m
   Part number V02596020
2. UC Bridge extension cable 4 m
   Part number V02596030
3. Solo 2 DL/ECULog extension cable 50 cm
   Part number V02589120
4. Analog channels harness
   Part number V02596070
   Wires: BLACK WIRE GND, WHITE WIRE SPARE ANALOG 1, BLUE WIRE SPARE ANALOG 2
5. CAN + EXT Power Taipan K cable
   Part number V02596160
6. Solo 2 DL/ECULog CAN + EXT power Taipan K cable
   Part number V02589180

Accessories

HBS2 (Handle Bar Switch 2)

The HBS2 is a handlebar-mounted switch unit designed for motocross applications.

HBS2 main features

• Map selection: Up to 5 selectable maps
• Fuel Correction: for low, middle, and high RPM
• Launch control at different levels
• Traction control at different levels
• Enable quickshift using the button on models equipped with a factory electronic shifter

Technical specifications

• Connector: 1 JST 04T-JWPF-VSLE-S waterproof connector for CAN BUS communication
• Body: PA6 + 30% glass fiber + silicon rubber
• Dimensions: 43.2x27.1x38.0 mm
• Waterproof: IP67
• Weight: 70 g

Part number

• XE1HBS200: HBS2

Pinout

The HBS2 connects via a JST 04T-JWPF-VSLE-S connector. The pinout is as follows:

• 1 - GND
• 2 - CAN HIGH
• 3 - CAN LOW
• 4 - +12V IN

CAN-BT Module

The CAN-BT Module provides instant access to key engine data from Taipan and Yarara ECUs. The SPARK App (for Apple iOS and Android) enables real-time monitoring of live engine parameters via a smartphone interface.

CAN-BT Module Technical specifications

• External power: 9-15 V
• Connections: CAN, Bluetooth
• Connectors: 1 Binder 712 female
• Material: PA6 30% glass
• Dimensions: 44.0 x 38.0 x 19.8 mm
• Weight: 50 g
• Waterproof: IP65

Part number

• X08CANBTM00: CAN-BT Module + ECU AIM Harness 40 cm

Pinout

The CAN-BT Module uses a 5-pin Binder 712 female connector. The pinout is:

• 1) CAN AIM+
• 2) GND
• 3) VBout CAN
• 4) CAN AIM-
• 5) Vext CAN

UC Bridge

The UC Bridge is available in two versions: User license and Tuner license. It facilitates communication between the ECU and a PC.

UC Bridge technical specifications

• Connections: n.1 USB connection for PC, n.1 JST 04R-JWPF-VSLE-S waterproof Connector for CAN Bus communication
• Body: PA6 + 30% glass fiber
• Dimensions: 103.5x45.3x18.1 mm
• Waterproof: IP65
• Weight: 80 g

Part numbers

• XE1UCB000: UC Bridge
• XE1UCBT00: UC Bridge Tuner

Pinout

The UC Bridge features a USB connector for PC connection and a JST 04R-JWPF-VSLE-S connector for CAN Bus communication. The pinout for the JST connector is:

• 1 - GND
• 2 - CAN CAL HIGH
• 3 - CAN CAL LOW
• 4 - POWER OUTPUT