AiM ECU Taipan & Accessories
PLUG 'N PLAY ECU FOR MOTOCROSS
Technical Specifications
The AiM ECU Taipan is a plug-and-play ECU designed for motocross bikes. It offers advanced features and compatibility with various motorcycle models.
Compatible Models
| Brand | Model | Type | From Year | To Year |
|---|---|---|---|---|
| GASGAS | MC 250F | Cross | 2021 | 2024 |
| GASGAS | MC 450F | Cross | 2021 | 2024 |
| GASGAS | EC 250F | Enduro | 2021 | 2023 |
| GASGAS | EC 350F | Enduro | 2021 | 2023 |
| HONDA | CRF 250R | Cross | 2019 | 2025 |
| HONDA | CRF 450R | Cross | 2019 | 2025 |
| HONDA | CRF 450L | Enduro | 2021 | 2023 |
| HONDA | CRF 450X | Enduro | 2021 | 2023 |
| HUSQVARNA | FC 250 | Cross | 2019 | 2024 |
| HUSQVARNA | FC 350 | Cross | 2019 | 2024 |
| HUSQVARNA | FC 450 | Cross | 2019 | 2024 |
| HUSQVARNA | FE 250 | Enduro | 2020 | 2023 |
| HUSQVARNA | FE 350 | Enduro | 2020 | 2023 |
| HUSQVARNA | FE 450 | Enduro | 2020 | 2023 |
| HUSQVARNA | FE 501 | Enduro | 2020 | 2023 |
| HUSQVARNA | FS 450 | Supermoto | 2019 | 2024 |
| KAWASAKI | KX 250 | Cross | 2022 | 2023 |
| KAWASAKI | KX 450 | Cross | 2019 | 2023 |
| KTM | SX-F 250 | Cross | 2019 | 2024 |
| KTM | SX-F 350 | Cross | 2019 | 2024 |
| KTM | SX-F 450 | Cross | 2019 | 2024 |
| KTM | EXC-F 250 | Enduro | 2020 | 2023 |
| KTM | EXC-F 350 | Enduro | 2020 | 2023 |
| KTM | EXC-F 450 | Enduro | 2020 | 2023 |
| KTM | EXC-F 500 | Enduro | 2020 | 2023 |
| KTM | SMR 450 | Supermoto | 2019 | 2024 |
Additional Characteristics to the Stock ECU:
- Two 0-5V analog inputs sampled @ 1,000 Hz each, can be alternatively used as switch to ground.
- Second injector driver for high impedance saturated injectors (12Ω).
- One low side driver (1A).
- Two CAN bus: one for calibration purposes, one for expansions (AiM handlebar switch, dataloggers, dash, etc.).
- Three JST JWPF waterproof auxiliary connectors.
- Power consumption: 150 mA.
Connectors:
- 1x JST 04T-JWPF-VSLE-S Connector
- 1x JST 08R-JWPF-VSLE-D Connector
- 1x JST 04R-JWPF-VSLE-S Connector
- 1x 33 pin male Connector
Specifications:
- Body: PA6 + 30% glass fiber.
- Dimensions: 89.4x75.4x29.3 mm.
- Waterproof: IP67.
- Weight: 260 g.
Part Numbers (ECU Taipan & Accessories)
- XE1ECUCB5: ECU Taipan 1.5
- XE1HBS200: HBS2 (Handle Bar Switch 2)
- X08CANBTM00: CAN-BT Module + ECU AIM Harness 40 cm
- XE1UCB000: UC Bridge
- XE1UCBT00: UC Bridge Tuner
- XE1ECUHBS205: Kit ECU Taipan 1.5 + HBS2
- XE1ECUHBS2UCB05: Kit ECU Taipan 1.5 + HBS2 + UC Bridge
Functional Diagram
The functional diagram illustrates the connection of the ECU Taipan with other AiM devices such as the Solo 2 DL, UC Bridge, LCU-One CAN, and HBS2. It also shows the connection to a PC and the motorcycle (GASGAS shown as an example).
Connections:
- PC connects to UC Bridge via USB.
- UC Bridge connects to ECU Taipan via UC Bridge extension cable.
- ECU Taipan connects to HBS2 and Quick Shifters/Second Injectors via dedicated harnesses.
- Solo 2 DL can connect to the ECU Taipan via a Solo 2 DL extension cable.
Connector Pinouts:
JST 04T-JWPF-VSLE-S Connector (External View):
- 1 - GND
- 2 - CAN CAL HIGH
- 3 - CAN CAL LOW
- 4 - 12V IN
JST 08R-JWPF-VSLE-D Connector (External View):
- 1 - 12V SECOND INJ
- 2 - LOW SIDE SECOND INJ
- 3 - LOW SIDE
- 4 - GND
- 5 - ANALOG INPUT 1
- 6 - ANALOG INPUT 2
- 7 - DNC
- 8 - DNC
JST 04R-JWPF-VSLE-S Connector (External View):
- 1 - GND
- 2 - CAN EXP HIGH
- 3 - CAN EXP LOW
- 4 - 12V OUT (switched)
Optional Cables
- UC Bridge extension cable 2 m (Part number V02596020)
- UC Bridge extension cable 4 m (Part number V02596030)
- Solo 2 DL extension cable 50 cm (Part number V02589120)
- Analog channels and second injection harness (Part number V02596060)
- Analog channels harness (Part number V02596070)
- Second injection harness (Part number V02596080)
Accessories
HBS2 (Handle Bar Switch 2)
The HBS2 is a handlebar-mounted switch unit for controlling various ECU functions.
HBS2 Main Features:
- Map selection: Up to 5 selectable maps.
- Fuel Correction: for low, middle, and high RPM.
- Launch control at different levels.
- Traction control at different levels.
- Enable quickshift using the button on models equipped with a factory electronic shifter.
Technical Specifications:
- Connector: 1x JST 04T-JWPF-VSLE-S waterproof connector for CAN BUS communication.
- Body: PA6 + 30% glass fiber + silicon rubber.
- Dimensions: 43.2x27.1x38.0 mm.
- Waterproof: IP67.
- Weight: 70 g.
Part Number:
- XE1HBS200: HBS2
Pinout:
JST 04T-JWPF-VSLE-S Connector (External View):
- 1 - GND
- 2 - CAN HIGH
- 3 - CAN LOW
- 4 - +12V IN
CAN-BT Module
The CAN-BT Module provides instant access to key engine data from your Taipan and Yarara ECU. By installing the SPARK App (for Apple iOS and Android), users get a streamlined, data-driven interface for real-time monitoring of live engine parameters.
CAN-BT Module Technical Specifications:
- External power: 9-15 V.
- Connections: CAN, Bluetooth.
- Connectors: 1x Binder 712 female.
- Material: PA6 30% glass.
- Dimensions: 44.0 x 38.0 x 19.8 mm.
- Weight: 50 g.
- Waterproof: IP65.
Part Number:
- X08CANBTM00: CAN-BT Module + ECU AIM Harness 40 cm
Pinout:
5 pins Binder 712 female connector (external view):
- 1 - CAN AIM+
- 2 - GND
- 3 - VBout CAN
- 4 - CAN AIM-
- 5 - Vext CAN
UC Bridge
The UC Bridge facilitates communication between the ECU and a PC, enabling tuning and data logging.
UC Bridge Technical Specifications:
- Connections: 1x USB connection for PC, 1x JST 04R-JWPF-VSLE-S waterproof Connector for CAN Bus communication.
- Body: PA6 + 30% glass fiber.
- Dimensions: 103.5x45.3x18.1 mm.
- Waterproof: IP65.
- Weight: 80 g.
Part Numbers:
- XE1UCB000: UC Bridge
- XE1UCBT00: UC Bridge Tuner
Pinout:
JST 04R-JWPF-VSLE-S Connector (External View):
- 1 - GND
- 2 - CAN CAL HIGH
- 3 - CAN CAL LOW
- 4 - POWER OUTPUT
