Kokido Xtovac 510 Pool Vacuum

Operation Modes

The Xtovac 510 features two operational states indicated by a dial:

• ON: For standard vacuuming operations.
• OFF: To turn the unit off.

Assembly and Usage

The Xtovac 510 can be assembled for different cleaning needs. A pole is required for operation but is not included.

Standard Mode

The vacuum is configured for standard pool cleaning.

Fine Mode

The vacuum is configured for finer debris collection.

Opening and Locking Mechanism

The unit has mechanisms to open and lock components:

• TO OPEN: Indicates how to open a part of the vacuum.
• TO LOCK: Indicates how to secure a part of the vacuum.

Charging

The vacuum can be charged using the provided charger.

• OFF+CHARGE: Indicates the unit should be in the OFF state while charging. Connect the charger to the unit and a power source. Ensure the connector and socket are dry and clean before charging.

Customer Service

For assistance, please contact Kokido:

• Tel: (866) 683-7672
• E-mail: support@kokido.com

WARNINGS & CAUTIONS

1. Keep the Pool Vacuum Cleaner out of reach of children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
2. Use only the original charger supplied with the pool vacuum and manufactured by Kokido.
3. Place the charger in a shaded dry area during both charging and storage.
4. Prior to connecting the charger for charging purposes, verify that the connector and socket are dry and clean.
5. Before operation, disconnect the gray color adapter and charger.
6. Make sure the pool vacuum is fully immersed in the pool before initiating operation.
7. Under no circumstances should you attempt to disassemble the pool vacuum. Doing so would void the warranty.
8. The pool vacuum must be charged before storage.