Bass Pro Shops Extremecast ETXSC10 Spincast Reel
Introduction
Congratulations on purchasing the BPS Extremecast spincast reel! This spincast reel has been engineered to bring your angling to a new level, combining cutting-edge features with precision manufacturing. Features include: aluminum frame with lube port, Powerlock™™ instant anti-reverse, ported aluminum nose cone with Free Flow™™ Line Guide, easy roller pickup pin system, double-paddle handle, adjustable star drag, offset thumb bar, and lightning quick 4.6:1 gear ratio. This package offers more than any other spincast reel in its class.
Specifications
Model | Bearings | Weight (oz) | Max Drag (lbs) | Line Capacity (Mono lb/yd) | Gear Ratio | IPT |
---|---|---|---|---|---|---|
ETXSC10 | 4 (3+1) | 10 | 9 | 8/160, 10/135, 12/120 | 4.6:1 | 27" |
Key Features
- Rigid Aluminum Frame and Sideplate: Resists torque that can interfere with gear operation.
- Lube Port: Allows periodic lubrication without disassembling the reel. Recommended to use lightweight grease sparingly. Lubrication frequency depends on climate (less in colder, more in hotter).
- Powerlock™™ Instant Anti-Reverse: A one-way roller bearing prevents the reel handle from rotating backward for positive hooksets.
- Aluminum Nose Cone: Ported to reduce weight and allow airflow. The Free Flow™™ Line Guide is more open than conventional spincast reels, allowing line to flow more freely for longer casts.
- Easy Roller Pickup Pin: Incorporates a roller bearing to help reduce line twist during retrieval.
- Adjustable Star Drag: Located behind the handle, allowing precise drag adjustments based on fishing conditions.
- Offset Thumbbar: Designed with a slightly offset thumbbar for a more natural range of motion when casting.
- Oscillating Spool: Allows line to stack more evenly, maximizing casting distance and reducing line wear.
Reel Care and Lubrication
Your new reel is designed for years of dependable service. Periodic cleaning and maintenance are required for peak performance. Use lightweight oil for moving parts (bearings, bushings, handle joints, bail springs) and lightweight grease for the main drive gear and pinion gear. Use oils and grease sparingly, as too much can negatively impact performance. Avoid multipurpose oils, as they can attract dirt and dust, causing excessive wear.
After each trip, check for dirt or sand. If exposed to saltwater, rinse the entire reel in freshwater, remove the spool, dry with a soft cloth, and lubricate as described.
Bass Pro Shops® Fishing Reels Limited Warranty
Bass Pro Shops will repair or replace (at their discretion) any Bass Pro Shops reel defective in workmanship or materials within one year from the original date of purchase. A dated sales receipt is required for warranty validation.
For reels purchased through catalogs or online (basspro.com):
- Replacement: Return reel postage prepaid with dated sales receipt to the Return Center address on your receipt.
- Repair: Return reel postage prepaid with a copy of your dated sales receipt to the Outdoor World Rod & Reel Repair® address below.
For reels purchased through Bass Pro Shops retail locations:
- Replacement: Return reel (postage prepaid if mailed) with dated sales receipt to the store of purchase.
- Repair: Return reel postage prepaid with a copy of your dated sales receipt to the Outdoor World Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair Address:
2300 E. Turner, Suite M
Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to abuse, accidents, or normal wear. Failure to clean, lubricate, and provide reasonable maintenance will void the warranty. Repairs after warranty expiration are available for a reasonable charge from Outdoor World Rod & Reel Repair.
Bass Pro Shops shall not be liable for an amount greater than the actual purchase price of the product nor for any special, incidental, or consequential damages.
Parts Diagram and List
The following diagram illustrates the components of the Extremecast Spincast ETXSC10 Reel:
[Diagram showing exploded view of the reel with numbered parts]
Parts List:
NO. | PART NAME | NO. | PART NAME | NO. | PART NAME |
---|---|---|---|---|---|
1 | LABEL PLATE | 19 | EARED DRAG WASHER | 37 | SCREW |
2 | LABEL HOLDER | 20 | CLICK RATCHET | 38 | SPACER |
3 | OIL CAP | 21 | LEVEL WIND PLATE | 39 | CLICK SPRING HOLDER |
4 | FRAME | 22 | LEVEL WIND PLATE WASHER | 40 | CLICK SPRING |
5 | THUMB BAR | 23 | RETAINING RING | 41 | SPRING WASHER |
6 | SCREW | 24 | TEFLON WASHER | 42 | DRAG STAR NUT |
7 | THUMB LEVER ASSY. | 25 | ONE-WAY CLUTCH ASSY, | 43 | DRAG STAR SPRING |
8 | SCREW | 26 | WASHER | 44 | DRAG STAR |
9 | SPRING | 27 | WASHER | 45 | CRANK ASSY, |
10 | WASHER | 28 | BEARING | 46 | CRANK NUT |
11 | SCREW | 29 | ANTI-REVERSE SPRING | 47 | CRANK LOCK CAP |
12 | BEARING | 30 | ANTI-REVERSE STEM | 48 | SCREW |
13 | GEAR SHAFT | 31 | SCREW | 49 | MAIN SHAFT RETAINER |
14 | DRAG WASHER | 32 | N-R PAWL | 50 | MAIN SHAFT SPRING |
15 | DRAG WASHER | 33 | N-R PAWL SPRING | 51 | PINION |
16 | DRIVE GEAR ASSY. | 34 | COVER PLATE | 52 | MAIN SHAFT |
17 | KEYED DRAG WASHER | 35 | SCREW | 53 | SPOOL HUB |
18 | BUSHING | 36 | ANTI-REVERSE LEVER | 54 | SPOOL HOLDER |
55 | SPOOL ASSY. | 56 | SPOOL LOCK WASHER | ||
57 | SCREW | 58 | WASHER | 59 | LINE ROLLER ASSY. (INCL.1 BB) |
60 | LINE TAG | 61 | PICKUP HOUSING SUB ASSY, | 62 | PINCH RING |
63 | PICK-UP HOUSING NUT | 64 | FRONT CONE ASSY. | 65 | SCREW |
66 | WASHER | 67 | BEARING COVER | 68 | SCREW |
69 | WASHER | 70 | 0-RING |
Related Documents
![]() |
Bass Pro Shops Pro Qualifier Spinning Reel Manual and Specifications Detailed specifications, features, operation instructions, care, lubrication, and warranty information for the Bass Pro Shops Pro Qualifier Spinning Reel models PQD1000, PQD2000, PQD3000, and PQD4000. |
![]() |
Bass Pro Shops Extreme Baitcast Reel - EXM10 Series User Manual User manual and parts list for the Bass Pro Shops Extreme Baitcast Reel, EXM10SHA, EXM10HA, EXM10SA, EXM10SHLA, and EXM10HLA models. Includes care, lubrication, features, and warranty information. |
![]() |
Bass Pro Shops CarbonLite 2.0 Spinning Reel User Manual and Specifications This document provides specifications, features, operation instructions, warranty information, and maintenance guidelines for the Bass Pro Shops CarbonLite 2.0 Spinning Reel, including models JCT1000, JCT1500, JCT2000, and JCT3000. |
![]() |
Bass Pro Shops Rods and Reels Battery Installation Guide Step-by-step instructions for installing batteries in your Bass Pro Shops Rods and Reels accessory, including removing the compartment lid and inserting AAA batteries. |
![]() |
Bass Pro Shops National Headquarters Springfield Missouri Explore Bass Pro Shops National Headquarters in Springfield, Missouri, known as 'The Grandaddy' of outdoor stores. Discover attractions like Johnny Morris' Wonders of Wildlife National Museum and Aquarium, the National Archery Hall of Fame, and the NRA Sporting Arms Museum. |