Bass Pro Shops CarbonLite 2.0 Spinning Reel
Congratulations on your purchase of a Bass Pro Shops reel! This reel is manufactured with the highest-quality components and has been extensively tested to ensure that your day on the water is more productive. Please take a moment to familiarize yourself with the integrated performance-enhancing features of this reel before use. This will help you to optimize the reel's settings and even further increase your fishing success. We wish you the best of luck in your future angling adventures!
Reel Specifications
Model | Bearings | Weight (oz.) | Max Drag (lbs.) | Line Capacity Mono/Braid (lbs./yds.) | IPT | Gear Ratio |
---|---|---|---|---|---|---|
JCT1000 | 8 (7+1) | 6.7 | 11 | 8/220, 10/150 | 30.5" | 6.2:1 |
JCT1500 | 8 (7+1) | 6.9 | 11 | 10/210, 20/135 | 32" | 6.2:1 |
JCT2000 | 8 (7+1) | 7.4 | 22 | 15/200, 20/170 | 34.5" | 6.2:1 |
JCT3000 | 8 (7+1) | 7.8 | 22 | 20/210, 30/170 | 36.8" | 6.2:1 |
Features
- 8-Bearing System
- Lightweight Carbon Frame
- Micro-Pitched Gearing System
- Double-Anodized Aluminum Spool
- Machined-Aluminum Handle
Features and Operations Instructions
Carbon Frame
The lightweight carbon construction of the frame utilizes a dense molecular alignment for outstanding strength and structural reinforcement.
Double-Anodized Aluminum Spool
The spool has been double-anodized to provide years of corrosion resistance.
Powerlock™ Instant Anti-Reverse
Your reel is equipped with our Powerlock instant anti-reverse system. This is a special type of bearing that allows the handle to only turn forward. There is no play in the handle so you have complete control during the retrieve and no "loose" feeling, which is important during stop-and-go retrieves.
Front Drag
Your reel is equipped with a drag system to help you fight stronger, faster fish without the risk of breaking your line. The drag can be adjusted by turning the knob on the front side or spool end of the reel. To properly set the drag, you will need a spring scale. Your drag should be set at 25% of the test rating of your line. Tie a loop in the end of your main line. Run it though the guides of your rod and attach it to the hook on the scale. Pull the scale until it registers 25% of the line rating. If you are using 6 lb. test, then you should set your drag to start slipping at 1.5 lbs.
Bass Pro Shops® Fishing Reels: Limited Warranty
Bass Pro Shops will repair or replace (at our discretion) any Bass Pro Shops reel which proves to be defective in workmanship or materials within one year from the original date of purchase. You must save your dated sales receipt for warranty validation. This warranty gives you specific legal rights, and you may have other rights which vary from state to state or province to province.
For reels purchased through Bass Pro Shops catalogs or Bass Pro Shops online:
- For reel replacement only: Return your reel postage prepaid with your dated sales receipt to the Return Center address listed on your receipt.
- For reel repair only: Return your reel postage prepaid with a copy of your dated sales receipt as proof of purchase and warranty validation to the Outdoor World Rod & Reel Repair address below.
For reels purchased through Bass Pro Shops retail locations:
- For reel replacement only: Return your reel (postage prepaid if sending by mail) along with your dated sales receipt to the store from which it was purchased.
- For reel repair only: Return your reel postage prepaid with a copy of your dated sales receipt as proof of purchase and warranty validation to the Outdoor World Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair, 2300 E. Turner, Suite M, Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to abuse, accidents, or normal wear. Failure to clean, lubricate, and provide reasonable and necessary maintenance will void the warranty. Repairs needed to your reel due to abnormal use or modification, or after warranty expiration, are available for a reasonable charge from Outdoor World Rod & Reel Repair, providing the reel is returned postage paid.
Except to the extent prohibited by applicable law, there are no warranties or conditions, express or implied, other than those expressly set out herein. Bass Pro Shops shall not, under any circumstances, be liable for an amount greater than the actual purchase price of the product nor for any special, incidental, or consequential damages suffered or incurred in connection with the product and Bass Pro Shops does not assume, and does not authorize any person to assume for it, any obligation or liability other than those expressly set out herein.
Reel Care And Lubrication
Your new reel is designed to provide years of dependable service. But like any other precision machine, periodic cleaning and maintenance is required for continued peak performance.
Reels made today require both a lightweight oil and grease. Oil and grease should be used sparingly; too much can have a negative impact on reel performance. There are lightweight oils and greases made specifically for fishing reels that can be found at basspro.com.
As a rule of thumb, oils should be used to lubricate any moving part on the reel, e.g. ball bearings, bushings, handle joints, bail springs, etc. Grease should be used to lubricate the main drive gear and pinion gear.
We do not recommend using any multipurpose oils. Many of these oils have properties that will attract dirt and dust to the internal parts. This may cause excessive wear and reduce the life of the reel.
After each trip, the reel should be checked for dirt or sand. If it has been exposed to saltwater, the spool should be removed and the entire reel rinsed in freshwater. Dry with a soft cloth and lubricate the reel as described above.
Parts Diagram
The following is a list of parts for the Bass Pro Shops CarbonLite 2.0 Spinning Reel:
No. | Part Name | No. | Part Name |
---|---|---|---|
1 | DRAG KNOB | 38 | ROLLER CLUTCH |
2 | DRAG WASHER RETAINER | 39 | SPACING SLEEVE |
3 | KEY WASHER | 40 | SCREW (G) |
4 | DRAG WASHER | 41 | BEARING RETAINER (A) |
5 | EARED WASHER | 42 | BALL BEARING (B) |
6 | SPOOL ASSEMBLY | 43 | WASHER (E) |
7 | WASHER (A) | 44 | PINION GEAR |
8 | BALL BEARING (A) | 45 | SPRING WASHER |
9 | WASHER (B) | 46 | BALL BEARING (C) |
10 | WASHER (C) | 47 | COLLAR (E) |
11 | WASHER (D) | 48 | BODY |
12 | SPOOL CLICK LEAF SPRING | 49 | MAIN SHAFT |
13 | CLICK LEAF SPRING HOLDER | 50 | STABILIZER BAR (A) |
14 | WASHER (E) | 51 | STABILIZER BAR (B) |
15 | ROTOR NUT | 52 | ANTI-REVERSE CAM |
16 | SCREW (A) | 53 | ANTI-REVERSE CAM SPRING |
17 | ROTOR | 54 | ANTI-REVERSE LEVER |
18 | BAIL TRIP LEVER SPRING | 55 | REAR COVER |
19 | BAIL TRIP LEVER | 56 | SCREW (H) |
20 | SCREW (B) | 57 | WASHER (F) |
21 | BAIL SPRING SHAFT | 58 | OSCILLATE GEAR |
22 | BAIL SPRING PLATE | 59 | "O"-RING (A) |
23 | BAIL SPRING | 60 | WASHER (G) |
24 | BAIL SPRING HOLDER | 61 | BALL BEARING (D) |
25 | COVER (A) | 62 | SCREW (I) |
26 | SCREW (C) | 63 | "O"-RING (B) |
27 | BAIL ARM | 64 | DRIVE GEAR |
28 | COLLAR (A) | 65 | WASHER (H) |
29 | SCREW (D) | 66 | BALL BEARING (E) |
30 | SCREW (E) | 67 | SIDE COVER |
31 | COLLAR (B) | 68 | SCREW (J) |
32 | COLLAR (C) | 69 | SCREW (K) |
33 | LINE ROLLER | 70 | HANDLE ASSEMBLY |
34 | COLLAR (D) | 71 | BALL BEARING (F) |
35 | BAIL ASSEMBLY | 72 | BEARING RETAINER (B) |
36 | SCREW (F) | 73 | HANDLE SCREW |
37 | CAP |
Additional Information
Proposition 65 Warning for California Customers: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Made in China
Visit basspro.com or cabelas.com for more information.
Bass Pro Shops, 2500 E. Kearney Springfield, MO 65898
File Info : application/pdf, 2 Pages, 925.53KB
DocumentDocumentReferences
Adobe Illustrator CC 22.1 (Macintosh) Adobe PDF library 15.00Related Documents
![]() | Bass Pro Shops Pro Qualifier Spinning Reel Manual and Specifications Detailed specifications, features, operation instructions, care, lubrication, and warranty information for the Bass Pro Shops Pro Qualifier Spinning Reel models PQD1000, PQD2000, PQD3000, and PQD4000. |
![]() | Bass Pro Shops Extremecast ETXSC10 Spincast Reel: Features, Care, and Warranty Detailed information on the Bass Pro Shops Extremecast ETXSC10 spincast reel, including its features, reel care and lubrication instructions, and limited warranty information. The document also includes a parts list and diagram. |
![]() | Bass Pro Shops Extreme Baitcast Reel - EXM10 Series User Manual User manual and parts list for the Bass Pro Shops Extreme Baitcast Reel, EXM10SHA, EXM10HA, EXM10SA, EXM10SHLA, and EXM10HLA models. Includes care, lubrication, features, and warranty information. |
![]() | Bass Pro Shops Rods and Reels Battery Installation Guide Step-by-step instructions for installing batteries in your Bass Pro Shops Rods and Reels accessory, including removing the compartment lid and inserting AAA batteries. |
![]() | Bass Pro Shops National Headquarters Springfield Missouri Explore Bass Pro Shops National Headquarters in Springfield, Missouri, known as 'The Grandaddy' of outdoor stores. Discover attractions like Johnny Morris' Wonders of Wildlife National Museum and Aquarium, the National Archery Hall of Fame, and the NRA Sporting Arms Museum. |