DOOGEE User Manual

Device Overview

The following components are identified on the device:

• 01: Speaker
• 02: Speaker
• 03: Indicator Lights
• 04: Distance Sensor
• 05: Front Camera
• 06: Microphone
• 07: Volume Button
• 08: Reset button
• 09: Power Button
• 10: 3.5 Headphone Jack
• 11: SIM/TF Card
• 12: Speaker
• 13: Type-C Port
• 14: Speaker
• 15: Camera
• 16: Flash

Getting Started

How to Insert SIM Card

To ensure your tablet can make calls, insert the SIM card in the following order:

1. Press the card pin into the side hole. The card tray will pop up and can be pulled out.
2. Take out the card slot and place the Nano SIM card or TF card with the metal side facing down. Ensure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
3. With the tablet facing up, insert the card holder into the tablet in the direction of the arrow.

How to Boot Up

The device has a non-removable battery. Press and hold the power button for 3-5 seconds to boot the system.

Messaging

How to Send SMS

1. Open the SMS app.
2. Select "New message" or "New information".
3. Enter a phone number or select from contacts.
4. Enter your text in the message field.
5. Press the "Send" icon.

How to Send MMS (Video/Photo)

1. When writing a text message, tap the attachment icon (often a paperclip or camera icon).
2. Select images, videos, or other files you wish to add. You can also take a new picture or video immediately.
3. Press the "Send" icon.

Language Settings

To change the device language:

1. Navigate to Main menu > Settings > System settings > Language & input method.
2. Select "Language & input method" > "Languages" > "Add a language".
3. Choose the desired language. The system will automatically switch to the selected language interface.
4. To set it as the primary language, select the language bar and drag the language icon to the top position.

Safety Precautions

To ensure safe usage of the product, strictly adhere to the following rules:

• Keep the tablet at least 15 cm away from medical implants or pacemakers. Do not carry the device in a coat pocket if you have such devices.
• Avoid exposing the device and battery to high temperatures or heat-generating equipment (sunlight, heaters, microwaves, ovens, water heaters). Overheating can cause an explosion.
• Disconnect the charger from the device and the power outlet when charging is complete or not in use.
• If the device has a non-removable battery, do not attempt to replace it yourself to avoid damage to the device or battery.
• Using unapproved or incompatible power sources, chargers, or batteries may cause fire, explosion, or other hazards.
• Do not disassemble, reset, insert foreign objects into, or immerse the battery in water or other liquids to prevent leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid excessive external pressure, which can lead to internal short circuits and overheating.
• The company is not responsible for accidents caused by non-standard charging equipment.

Maintenance

Understand the maintenance procedures to use the tablet more safely and effectively, and to extend its service life:

• Follow the instructions in the manual for opening the device and disassembling accessories. Do not attempt other methods.
• Avoid dropping, knocking, or shaking the tablet. Rough handling can cause screen rupture and damage internal components.
• Do not use chemical solvents or detergents for cleaning. Wipe the tablet case with a soft cotton cloth dampened with water or mild soap.
• Clean the camera lens and display with a clean, dry, soft cloth.
• Troubleshooting Crashes: If the tablet crashes or becomes unresponsive, press and hold the power button for more than 12 seconds to force a restart. This can resolve general software bugs.
• When the charger is not in use, unplug it from the power outlet. Do not leave a fully charged battery connected to the charger for extended periods, as overcharging can shorten battery life.

FCC Compliance

1) FCC 15.19: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2) FCC 15.21: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

3) FCC 15.105: For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the manual: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

SAR Information

This Tablet meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations. The standards include a substantial safety margin to assure the safety of all persons.

FCC RF Exposure Information and Statement: The SAR limit for the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device type: Tablet (FCC ID: 2AX4YTABE3MAX) has been tested against this SAR limit. The highest SAR value reported during product certification is 1.155W/kg when properly worn on the body. This device was tested for typical body-worn operations with the back of the smartphone kept 00mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 00cm separation distance between the user's body and the back of the tablet. Accessories like belt clips and holsters should not contain metallic components. Avoid using accessories that do not meet these requirements. Listening at very high volume for prolonged periods can damage your hearing.

Certification

Manufacturer: Shenzhen DOOGEE Hengtong Technology CO.,LTD

Manufacturer Address: B, 2/F, Building A4, Silicon Valley Power Digital Industrial Park, No. 22, Dafu Industrial Zone, Guanlan Aobei Community, Guanlan Street, Longhua New District, Shenzhen, Guangdong, China

Google certification: GMS

EU certification: CE ROHS

Battery certification: IEC:62133 UN38.3 MSDS

Americas certification: FCC ID: 2AX4YTABE3MAX

Additional Information

This product can be used in all EU member states.

This user manual is for reference only. Specific functions and product pictures may differ slightly from the actual ones. Please prevail in kind.

Visit us online: www.doogee.com

Follow us on social media: DOOGEE mobile, DOOGEE_official

Charger Specifications

The included charger supports 15-18W USB PD (Power Delivery).