DJI MIC 3 Quick Start Guide

Product Overview

The DJI MIC 3 is a wireless microphone system designed for clear audio recording. This guide provides essential steps for setup and operation.

Key Components:

• RX: The receiver unit, which connects to your recording device (camera or smartphone).
• TX: The transmitter unit(s), which clip onto subjects to capture audio.
• Charging Case: Used to store and charge the TX and RX units.

Diagram Description (Page 1): A visual shows the DJI MIC 3 system components: a charging case, two wireless transmitters (TX 1, TX 2), and a receiver (RX). The case is open, revealing slots for the transmitters. The transmitters are depicted with magnetic clips, and the receiver shows a connection port.

Setup Guide

Section A: Connecting to a Mobile Device

This section details how to connect the DJI MIC 3 system to a smartphone for recording.

1. Connect the RX unit to a smartphone using the appropriate adapter (e.g., USB-C).
2. Ensure the DJI Mimo app is installed and open on the smartphone. The system will establish a connection.
3. Attach the TX units to the clothing of the subjects being recorded.

Diagram Description (Page 2, Section A): The diagram illustrates connecting the RX unit to a smartphone via a USB-C connection. It shows the smartphone screen displaying the DJI Mimo app interface, confirming the connection. It then shows the TX units being clipped onto shirts for recording.

Section B: Connecting to a Camera

This section outlines the process of connecting the DJI MIC 3 system to a camera.

1. Connect the RX unit to the camera's microphone input port (MIC-IN).
2. Attach the TX units to the clothing of the subjects being recorded.

Diagram Description (Page 2, Section B): The diagram shows the RX unit being plugged into the 'OUT' port of the camera, which is labeled as 'MIC-IN'. It then shows the TX units being clipped onto shirts.

Section C: Pairing and Device Compatibility

This section covers pairing the TX units and compatibility with DJI devices.

1. To pair a TX unit, press and hold the power button for 2 seconds until the indicator light shows pairing status.
2. The DJI MIC 3 can be paired with devices like the Osmo Action 4, Osmo Action 5 Pro, and Osmo Pocket 3 via Bluetooth.
3. Attach the TX unit to clothing. A windscreen can be attached to the TX for wind noise reduction.

Diagram Description (Page 3, Section C): The diagram shows the TX unit being powered on for 2 seconds for pairing. It illustrates pairing the TX with Osmo Action 4/5 Pro and Osmo Pocket 3. It also shows the TX unit being clipped onto a shirt, with an option to attach a furry windscreen. A QR code and URL (https://s.dji.com/guide111) are provided for accessing the DJI Mimo App and further guides.

Component Identification

Detailed descriptions of the various components and their functions.

Transmitter (TX) and Receiver (RX) Ports and Buttons

Diagram Description (Page 4, Top): Shows the TX unit with numbered indicators for: 1. Recording Status LED, 2. Charging Contacts, 3. System Status LED, 4. Power Button, 5. Linking Button. Also shows a visual indicator for recording status (REC) and audio levels.

Diagram Description (Page 4, Middle): Shows the RX unit with numbered indicators for: 1. USB-C Port, 2. Charging Contacts, 3. Monitor Port, 4. Output Port, 5. Touchscreen, 6. Dial, 7. Power Button, 8. Release Button.

Charging Case

Diagram Description (Page 4, Bottom): Shows the charging case with numbered indicators for: 1. Battery Level LEDs, 2. USB-C Port. The diagram also illustrates connecting the case to a power source via USB-C.

Component Functions (English, Chinese, Polish)

TX Unit:

• EN: 1. Recording Status LED, 2. Charging Contacts, 3. System Status LED, 4. Power Button, 5. Linking Button
• CHS: 1. 录音状态指示灯, 2. 充电触点, 3. 系统状态指示灯, 4. 电源按键, 5. 配对按键
• PL: 1. Dioda stanu nagrywania, 2. Styk ładowania, 3. Dioda LED stanu systemu, 4. Przycisk zasilania, 5. Przycisk łączenia

RX Unit:

• EN: 1. USB-C Port, 2. Charging Contacts, 3. Monitor Port, 4. Output Port, 5. Touchscreen, 6. Dial, 7. Power Button, 8. Release Button
• CHS: 1. USB-C 接口, 2. 充电触点, 3. 监听接口, 4. 输出接口, 5. 触摸屏, 6. 拨轮, 7. 电源按键, 8. 解锁按键
• PL: 1. Port USB-C, 2. Styk ładowania, 3. Port monitora, 4. Port wyjściowy, 5. Ekran dotykowy, 6. Pokrętło, 7. Przycisk zasilania, 8. Przycisk zwalniania

Charging Case:

• EN: 1. Battery Level LEDs, 2. USB-C Port
• CHS: 1. 电量指示灯, 2. USB-C 接口
• PL: 1. Diody LED poziomu naładowania akumulatora, 2. Port USB-C